Phoenix Contact 1911965 Terminal Block Plug Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 1911965 is a 2-position terminal block plug with female sockets, 0.200" (5.08mm) pitch, designed for 180° free-hanging in-line applications. This component features screw-rising cage clamp termination, supporting 16A at 630V (IEC) and 16A at 300V (UL), with wire gauge compatibility from 12-30 AWG (0.2-2.5mm²). The part is active in production and ROHS3 compliant. Equivalent and substitute parts are identified for applications requiring alternative manufacturers, pitch specifications, or operational parameter variations while maintaining functional compatibility.

Substiute Parts

1911965

Phoenix ContactIn Stock: 9251911965 Datasheet

Current PartRFQ

0395200002

MolexIn Stock: 94620395200002 Datasheet

SimilarRFQ

0395205002

MolexIn Stock: 63800395205002 Datasheet

SimilarRFQ

OSTTJ025153

On-Shore TechnologyIn Stock: 934OSTTJ025153 Datasheet

SimilarRFQ

OSTTJ027150

On Shore Technology Inc.In Stock: 11198OSTTJ027150 Datasheet

SimilarRFQ

TJ0251560000G

Amphenol AnytekIn Stock: 2160TJ0251560000G Datasheet

SimilarRFQ

TJ0271560000G

Amphenol AnytekIn Stock: 2996TJ0271560000G Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following critical parameters: number of positions (2), connector type (plug with female sockets), mounting configuration (free-hanging in-line), termination method (screw-based), and material flammability rating (UL94 V-0). Pitch tolerance is the primary differentiator among substitutes, with two groupings identified:

Group 1 - Exact Pitch Match (0.200" / 5.08mm): OSTTJ025153, TJ0251560000G. These parts maintain identical pitch specifications to the main part.

Group 2 - Nominal Pitch Variation (0.197" / 5.00mm): 0395200002, 0395205002, OSTTJ027150, TJ0271560000G. These parts operate at 5.00mm pitch, representing a 0.08mm tolerance variation from the main part specification.

All substitute parts maintain UL94 V-0 flammability compliance, ROHS3 compliance, and screw termination architecture. Current and voltage ratings vary by manufacturer and certification standard (IEC vs. UL), requiring application-specific validation.

Parameter Comparison

Engineering Selection Recommendations

All identified substitute parts maintain active production status and ROHS3 compliance, meeting regulatory requirements equivalent to the Phoenix Contact 1911965.

For exact pitch compatibility (5.08mm): OSTTJ025153 and TJ0251560000G are direct pitch matches. OSTTJ025153 supports 15A UL current with wire gauge range 12-24 AWG. TJ0251560000G supports 12A UL current with wire gauge range 12-24 AWG and M3 screw specification matching the main part.

For 5.00mm pitch applications: Molex 0395200002 and 0395205002 both support 18A UL current, exceeding the main part's 16A rating, with full 12-30 AWG wire gauge compatibility. OSTTJ027150 supports 12-30 AWG wire gauge with 5.00mm pitch. TJ0271560000G provides 5.00mm pitch with 12A UL current and M3 screw specification.

Selection should prioritize pitch matching to the mating connector. Where pitch variation is acceptable within system design tolerances, Molex substitutes 0395200002 and 0395205002 offer higher current capacity. Wire gauge compatibility must be verified against application requirements, particularly for On-Shore and Amphenol options with restricted lower gauge limits.

Frequently Asked Questions (FAQ)

Q: Can I substitute a 5.00mm pitch part for the 5.08mm Phoenix Contact 1911965?

A: Pitch substitution is possible only if the mating connector or header accepts the 0.08mm tolerance variation. Direct mechanical compatibility cannot be assumed without verification of the receiving connector specification. Consult the mating component documentation before proceeding with pitch-variant substitution.

Q: What is the significance of the wire gauge range differences?

A: The Phoenix Contact 1911965 supports 12-30 AWG (0.2-2.5mm²). Substitute parts from On-Shore and Amphenol restrict the lower gauge to 12-24 AWG (0.34-2.5mm² or 1-2.5mm²). Applications requiring 26-30 AWG wire compatibility must use the main part or Molex substitutes, which maintain the full 12-30 AWG range.

Q: Are all substitutes compatible with the same current and voltage requirements?

A: No. The Phoenix Contact 1911965 is rated 16A at 300V (UL). Molex parts support 18A, while Amphenol and On-Shore parts support 12-15A. Verify that the substitute part's current and voltage ratings meet or exceed your application requirements. IEC ratings are not uniformly specified across all substitutes.

Q: What does "Screw - Rising Cage Clamp" termination mean?

A: This termination method uses a screw mechanism to secure the wire within a rising cage clamp structure. Phoenix Contact, Molex, and Amphenol parts employ this design. On-Shore OSTTJ parts use standard screw termination without the rising cage clamp feature. Both methods are functionally compatible for wire retention, but the mechanical design differs.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All identified substitute parts carry ROHS3 compliance certification, matching the regulatory status of the Phoenix Contact 1911965.