Phoenix Contact 1909087 Terminal Block Header - Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 1909087 is a 7-position terminal block header with male pins, shrouded on 4 sides, featuring 0.150" (3.81mm) pitch and 90° right-angle orientation for through-hole mounting. This component is classified as obsolete, making identification of functionally equivalent alternatives essential for ongoing design support and procurement continuity. Substitute parts must maintain electrical performance, mechanical compatibility, and mounting characteristics to ensure direct interchangeability in existing circuit designs.

Substiute Parts

1909087

Phoenix ContactIn Stock: 11881909087 Datasheet

Current PartRFQ

0395161507

MolexIn Stock: 9560395161507 Datasheet

SimilarRFQ

0395166007

MolexIn Stock: 19020395166007 Datasheet

SimilarRFQ

1862830000

WeidmüllerIn Stock: 7641862830000 Datasheet

SimilarRFQ

1863190000

WeidmüllerIn Stock: 10181863190000 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Phoenix Contact 1909087 is determined by strict alignment with the following critical parameters:

• Position Count & Pitch: All substitutes must provide exactly 7 positions at 0.150" (3.81mm) pitch spacing
• Connector Type & Orientation: Header configuration with male pins, shrouded (4 side), 90° right-angle mounting
• Electrical Ratings: Minimum UL ratings of 8 A current and 300 V voltage
• Termination & Mounting: Solder termination with through-hole PCB mounting capability
• Flammability Compliance: UL94 V-0 material rating required
• RoHS Compliance: All substitutes must meet RoHS requirements

The following parts meet these substitution criteria:

• Molex 0395161507 (Eurostyle ESE 39516 series, Active status)
• Molex 0395166007 (Eurostyle ESE 39516 series, Active status)
• Weidmüller 1862830000 (Omnimate SC series, Active status)
• Weidmüller 1863190000 (Active status)

Parameter Comparison

Engineering Selection Recommendations

All four substitute parts maintain active product status, ensuring long-term availability and manufacturing support compared to the obsolete Phoenix Contact 1909087. Selection among substitutes should be based on the following considerations:

Molex 0395161507 and 0395166007 are functionally equivalent alternatives from the Eurostyle ESE 39516 series with active status and full compliance documentation. Both parts meet or exceed the electrical requirements of the original component. The primary distinction is housing color (black versus green) and contact mating finish (gold versus tin). These parts are suitable for direct replacement in applications where the original specifications are maintained.

Weidmüller 1862830000 from the Omnimate SC series exceeds the original electrical specifications with 10 A UL current rating and 17.5 A IEC current rating, along with enhanced operating temperature range (-50°C to 120°C). This part includes additional features such as solder retention and IP20 ingress protection. The contact tail length (0.059" / 1.50mm) differs from the original (0.134" / 3.40mm), requiring verification of PCB layout compatibility.

Weidmüller 1863190000 maintains active status and RoHS compliance but provides limited technical specification data in the available documentation. This part should be cross-referenced with complete manufacturer datasheets before selection.

Frequently Asked Questions (FAQ)

Q: Can the Molex 0395161507 directly replace the Phoenix Contact 1909087?

A: Yes. Both parts share identical position count (7), pitch (0.150" / 3.81mm), orientation (90° right angle), connector type (male pins, shrouded 4 side), and electrical ratings (8 A UL, 300 V UL). The Molex part has active product status, ensuring continued availability.

Q: What is the significance of the contact mating finish difference between Molex 0395161507 (gold) and 0395166007 (tin)?

A: Contact mating finish affects corrosion resistance and contact reliability. Gold plating provides superior corrosion resistance in harsh environments, while tin plating is standard for general applications. Selection depends on environmental exposure and application requirements.

Q: Why does the Weidmüller 1862830000 have a shorter contact tail length (0.059" vs. 0.134")?

A: Contact tail length affects solder joint formation and PCB penetration depth. The shorter tail on the Weidmüller part requires verification that existing PCB pad layouts and through-hole depths accommodate this dimension. Consult PCB design specifications before substitution.

Q: Are all substitute parts RoHS compliant?

A: The Molex 0395161507 is ROHS3 compliant. The Weidmüller 1862830000 and 1863190000 are RoHS compliant. The Molex 0395166007 compliance status is not specified in available documentation. Verify RoHS certification status with manufacturers for regulatory compliance requirements.

Q: What is the difference between IEC and UL electrical ratings?

A: IEC (International Electrotechnical Commission) and UL (Underwriters Laboratories) ratings represent different testing standards and safety certifications. Both apply to the same component but may yield different current and voltage limits. Design specifications should reference the applicable standard for your application region.

Q: Can the Weidmüller 1862830000 be used in applications requiring the exact operating temperature range of the original part?

A: The Weidmüller 1862830000 provides an extended operating temperature range (-50°C to 120°C) compared to the Phoenix Contact 1909087 (operating temperature not specified). This part is suitable for applications requiring wider temperature performance. Verify that your application requirements align with the specified range.