Phoenix Contact 1902848 Terminal Block Header - Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 1902848 is a 5-position terminal block header with male pins, shrouded on 4 sides, featuring 0.200" (5.08mm) pitch vertical through-hole mounting. This component is classified as obsolete, making identification of suitable substitute parts essential for ongoing system maintenance and new design implementations. The part operates at 12A (IEC) / 12A (UL) and 400V (IEC) / 300V (UL), with solder termination and UL94 V-0 flammability rating.

Substiute Parts

1902848

Phoenix ContactIn Stock: 8651902848 Datasheet

Current PartRFQ

1955882

Phoenix ContactIn Stock: 10161955882 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Phoenix Contact 1902848 is determined by the following critical parameters:

• Position Count & Pitch: 5 positions at 0.200" (5.08mm) spacing
• Connector Type & Orientation: Header with male pins, shrouded (4 side), vertical mounting
• Electrical Ratings: Minimum 12A current capacity and 300V voltage rating (UL standard)
• Mounting & Termination: Through-hole solder termination
• Compliance: RoHS compliance and UL94 V-0 flammability rating

The Phoenix Contact 1955882 meets all substitution criteria. While housed in the COMBICON CCVA series (versus the original MSTBVA series), it maintains functional and electrical equivalence across all critical parameters. The 1955882 is classified as active product status, providing long-term availability for replacement and new applications.

Parameter Comparison

Engineering Selection Recommendations

The Phoenix Contact 1955882 is the direct substitute for the obsolete 1902848. Both components maintain identical mechanical compatibility and equivalent electrical performance across IEC standards. The 1955882 carries active product status, ensuring continued availability and supply chain reliability.

The 1955882 operates at 10A under UL standards (versus 12A for the 1902848), representing a minor reduction in UL current capacity. For applications operating within 10A UL limits, this substitution presents no functional constraint. Applications requiring the full 12A UL rating should evaluate this specification difference against system requirements.

Both parts maintain RoHS compliance and UL94 V-0 flammability certification, satisfying regulatory and safety requirements for equivalent applications.

Frequently Asked Questions (FAQ)

Q: Can the Phoenix Contact 1955882 directly replace the 1902848 in existing designs?

A: Yes, for applications within 10A UL current limits. The 1955882 maintains identical mechanical fit, pitch, position count, and mounting configuration. Verify that your application current draw does not exceed 10A under UL operating conditions.

Q: What is the primary difference between these two parts?

A: The 1902848 is obsolete (COMBICON MSTBVA series), while the 1955882 is active production (COMBICON CCVA series). The 1955882 provides equivalent functionality with improved supply availability. UL current rating differs: 12A (1902848) versus 10A (1955882).

Q: Are the physical dimensions compatible?

A: Yes. Both parts feature 5 positions at 0.200" (5.08mm) pitch, vertical through-hole mounting, and identical shrouded male pin configuration. Contact tail length and insulation height differ slightly (1902848: 0.146" / 0.480"; 1955882: 0.102" / 0.472"), but these variations do not affect PCB mounting compatibility.

Q: Do both parts meet the same compliance standards?

A: Yes. Both the 1902848 and 1955882 are RoHS compliant and carry UL94 V-0 flammability ratings. Both operate at 400V (IEC) and 300V (UL) voltage levels.

Q: What packaging is available for the 1955882?

A: The 1955882 is supplied in bulk packaging, with 952 pieces currently in stock as new original inventory.