LAPP 19012000 Hood Connector Side Entry M20 HB6 Equivalent & Substitute Parts

Part Overview

The LAPP 19012000 is an EPIC® HB series hood connector designed for side entry applications with M20 thread size. This accessory component provides dust-tight and water-resistant sealing per IP65 specifications, suitable for heavy-duty industrial environments operating between -40°C and 100°C. The part is currently active in production. Substitute parts may be required due to inventory availability, regional supplier preferences, or specific application requirements where equivalent electrical and mechanical parameters are acceptable.

Substiute Parts

19012000

LAPPIn Stock: 84619012000 Datasheet

Current PartRFQ

19300061540

HARTINGIn Stock: 18104819300061540 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the LAPP 19012000 is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Connector Type: Hood
• Style: Side Entry
• Thread Size: M20
• Ingress Protection Rating: IP65 (Dust Tight, Water Resistant)
• Housing Material: Aluminum (Alloy or Die Cast variants acceptable)
• Housing Finish: Powder Coated
• Lock Location: Locking Clip (1) on Base Bottom

Acceptable Variation Parameters:

• Size/Dimension: Tolerance within ±0.05" (±1.27mm) on height dimension
• Operating Temperature Range: Minimum -40°C, maximum ≥100°C
• Housing Color: Gray (standard industrial specification)

The HARTING 19300061540 (Han® B series) meets all mandatory matching parameters and acceptable variation criteria, qualifying it as a direct substitute for the LAPP 19012000.

Parameter Comparison

Engineering Selection Recommendations

Primary Part Selection (LAPP 19012000): Select the LAPP 19012000 when EPIC® HB series standardization is required within your system architecture or when existing connector ecosystems mandate LAPP compatibility. This part is active in production with 833 units in current inventory.

Substitute Part Selection (HARTING 19300061540): The HARTING 19300061540 is a qualified substitute when:

• Inventory availability of the primary LAPP part is constrained
• Regional supply chain logistics favor HARTING distribution channels
• System design permits cross-manufacturer hood connector integration
• Extended operating temperature capability (up to 125°C) provides operational margin beyond the primary part specification

Both parts carry identical ECCN (EAR99) and HTSUS (8538.90.8180) classifications, indicating equivalent regulatory treatment. The HARTING substitute includes RoHS3 compliance and REACH unaffected status documentation. Both parts maintain IP65 ingress protection and identical locking mechanisms, ensuring functional interchangeability in side-entry M20 applications.

Frequently Asked Questions (FAQ)

Q: Can the HARTING 19300061540 be used as a direct replacement for the LAPP 19012000 in existing installations?

A: Yes. Both parts share identical connector type (hood), style (side entry), thread size (M20), ingress protection rating (IP65), housing material composition (aluminum-based), housing finish (powder coated), and locking mechanism (locking clip on base bottom). Dimensional variance is 0.80mm in height, which falls within acceptable mechanical tolerance for hood connector applications.

Q: What is the significance of the different size designations (HB6 vs. 6B)?

A: HB6 and 6B are manufacturer-specific size nomenclature for equivalent connector sizes within their respective series (EPIC® HB and Han® B). Both designations correspond to the same physical and electrical interface specifications for M20 side-entry hood connectors.

Q: Does the HARTING substitute's higher operating temperature range (125°C vs. 100°C) affect compatibility?

A: No. The substitute's extended temperature capability represents an enhancement that does not compromise compatibility. Applications operating within the original -40°C to 100°C range will function identically with either part. The higher maximum rating provides additional thermal margin for the substitute.

Q: Are there packaging or inventory considerations when selecting between these parts?

A: The LAPP 19012000 is available in bulk packaging with 833 units in current inventory. The HARTING 19300061540 is available in bulk packaging with 180,995 units in current inventory. Selection may be influenced by project volume requirements and supply chain lead times.

Q: What regulatory or compliance differences exist between these parts?

A: Both parts share identical ECCN (EAR99) and HTSUS (8538.90.8180) classifications. The HARTING substitute includes documented RoHS3 compliance and REACH unaffected status. Both parts are classified as accessories within the heavy-duty connector category.