LAPP 19009000 Equivalent & Substitute Parts Reference

Part Overview

The LAPP 19009000 is an EPIC® HB series heavy duty connector base designed for box mount applications with side entry configuration. This M20 threaded connector delivers IP65 ingress protection suitable for dust-tight and water-resistant industrial environments. The component is currently active in production with 941 pieces in stock inventory.

Substitute parts become necessary when primary component availability is limited, when supply chain optimization requires alternative sourcing, or when design flexibility permits selection from compatible connector families that meet identical electrical and mechanical specifications.

Substiute Parts

19009000

LAPPIn Stock: 98519009000 Datasheet

Current PartRFQ

19300061295

HARTINGIn Stock: 402219300061295 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the LAPP 19009000 is determined by strict alignment of the following critical parameters:

Mandatory Matching Parameters:

• Connector Type: Base - Box Mount configuration
• Style: Side Entry orientation
• Thread Size: M20 specification
• Ingress Protection: IP65 rating (Dust Tight, Water Resistant)
• Lock Mechanism: Locking Clip (1) on Base Bottom
• Housing Material: Aluminum construction (Alloy or Die Cast)
• Housing Finish: Powder Coated surface treatment

The HARTING 19300061295 (Han® B series) satisfies all mandatory parameters, establishing it as a direct substitute. Both connectors share identical mechanical interface requirements, environmental protection specifications, and mounting configurations. Dimensional variations within the specified ranges do not affect functional interchangeability in box mount applications.

Parameter Comparison

Engineering Selection Recommendations

Both the LAPP 19009000 and HARTING 19300061295 are active production components with identical ECCN (EAR99) and HTSUS classifications, confirming regulatory equivalence for export and tariff purposes.

The HARTING 19300061295 provides an extended operating temperature range (-40°C ~ 125°C versus -40°C ~ 100°C), offering thermal performance margin in high-temperature applications. The HARTING component includes Feed Through feature capability in addition to the standard Cover feature.

Dimensional differences (2mm length reduction, 5.5mm height reduction in the HARTING unit) remain within acceptable tolerances for box mount installations where the M20 thread interface and locking clip positioning are the controlling factors.

The HARTING 19300061295 carries RoHS3 compliance and REACH Unaffected status with MSL Level 1 rating, providing documented environmental and moisture sensitivity specifications.

Selection between these components should be based on application-specific temperature requirements, available inventory levels, and any design-specific feature requirements (Feed Through capability).

Frequently Asked Questions (FAQ)

Q: Can the HARTING 19300061295 directly replace the LAPP 19009000 in existing installations?

A: Yes. Both connectors share identical M20 thread specifications, IP65 ingress protection ratings, side entry configuration, and locking clip positioning on the base bottom. The mechanical interface is fully compatible for box mount applications.

Q: What is the significance of the size designation difference (HB6 versus 6B)?

A: Size designations reflect manufacturer-specific nomenclature within their respective connector families (EPIC® HB and Han® B series). Both designations refer to equivalent connector sizes with matching electrical and mechanical specifications. The designations do not indicate incompatibility.

Q: Are there dimensional constraints that would prevent substitution?

A: The dimensional variations (2mm in length, 5.5mm in height) do not affect functional interchangeability. Box mount applications rely on the M20 thread interface and locking clip positioning as primary mechanical constraints. Verify available mounting space accommodates the HARTING unit's 82.00mm length and 51.50mm height specifications.

Q: What is the difference between the Cover and Cover + Feed Through features?

A: The HARTING 19300061295 includes both Cover and Feed Through capabilities, providing additional design flexibility. The LAPP 19009000 includes Cover feature only. Feed Through capability does not affect substitution compatibility; it represents an additional feature available on the HARTING component.

Q: How do the operating temperature ranges affect component selection?

A: The LAPP 19009000 operates from -40°C to 100°C. The HARTING 19300061295 extends the upper limit to 125°C. For applications operating below 100°C, both components are equivalent. For applications requiring operation between 100°C and 125°C, the HARTING component is required.

Q: Are there compliance or certification differences between these components?

A: Both components share identical ECCN (EAR99) and HTSUS (8538.90.8180) classifications. The HARTING 19300061295 includes documented RoHS3 compliance and REACH Unaffected status. Both components maintain IP65 ingress protection certification.

Q: What inventory considerations apply to these substitutes?

A: LAPP 19009000 inventory: 941 pieces. HARTING 19300061295 inventory: 3967 pieces. The HARTING component offers significantly higher stock availability for immediate procurement.