Phoenix Contact 1900060 Terminal Block Header - Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 1900060 is a 24-position terminal block header with male pins, shrouded on four sides, featuring 0.197" (5.00mm) pitch and 90° right-angle orientation for through-hole mounting. This component is classified as obsolete, making identification of functionally equivalent alternatives essential for ongoing system maintenance and new design implementations.

The primary reason for identifying substitute parts is the obsolete product status of the 1900060. Active equivalent models provide continuity of supply while maintaining electrical and mechanical compatibility within the specified parameter ranges.

Substiute Parts

1900060

Phoenix ContactIn Stock: 11081900060 Datasheet

Current PartRFQ

1757682

Phoenix ContactIn Stock: 10621757682 Datasheet

SimilarRFQ

1836560

Phoenix ContactIn Stock: 11421836560 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Phoenix Contact 1900060 is determined by the following mandatory parameters:

• Position Count & Pitch: All substitutes maintain 24 positions at 0.197" (5.00mm) pitch
• Header Type & Orientation: All substitutes are male pin headers with 4-side shrouding and 90° right-angle configuration
• Mounting Method: All substitutes use through-hole mounting
• Electrical Ratings: All substitutes meet or exceed the IEC current rating of 12A and maintain voltage ratings within acceptable ranges (IEC: 320V-400V; UL: 300V)
• Compliance Standards: All substitutes maintain UL94 V-0 flammability rating and RoHS compliance
• Moisture Sensitivity: All substitutes maintain MSL 1 classification

The primary differences between the main part and substitutes are termination style (press-fit versus solder), housing material composition, contact tail length, and product status (obsolete versus active).

Parameter Comparison

Engineering Selection Recommendations

Both Phoenix Contact 1757682 and 1836560 are active product alternatives to the obsolete 1900060, with electrical and mechanical parameters within acceptable substitution ranges.

Phoenix Contact 1757682 maintains identical electrical ratings (12A IEC, 15A UL) and insulation height to the main part. The primary design difference is solder termination versus press-fit, with a slightly shorter contact tail length (4.60mm versus 4.19mm). Housing material is polyamide rather than PBT. This substitute is suitable for applications where solder termination is compatible with existing PCB design and assembly processes.

Phoenix Contact 1836560 provides the highest current rating among the three parts (16A UL) and operates across a specified temperature range (-40°C to 100°C). The contact tail length is significantly shorter (2.00mm), and housing material is liquid crystal polymer. IEC voltage rating is 320V, which remains within acceptable operational parameters for most industrial applications. This substitute is suitable for applications requiring extended temperature performance and higher current capacity.

Both substitutes maintain RoHS compliance, UL94 V-0 flammability rating, and MSL 1 moisture sensitivity classification, ensuring regulatory and environmental compliance equivalent to the main part.

Frequently Asked Questions (FAQ)

Q: Can Phoenix Contact 1757682 or 1836560 directly replace the 1900060 in existing designs?

A: Both substitutes maintain the same 24-position count, 5.00mm pitch, 90° right-angle orientation, and through-hole mounting configuration. However, termination style differs: the 1900060 uses press-fit termination, while both substitutes use solder termination. PCB design modifications may be required to accommodate solder pads instead of press-fit holes. Contact tail length variations (4.19mm, 4.60mm, and 2.00mm respectively) may affect PCB stack-up and clearance calculations.

Q: What are the electrical compatibility considerations?

A: All three parts meet the core IEC requirement of 12A at 400V (1836560 at 320V). UL ratings are 15A at 300V for the 1900060 and 1757682, and 16A at 300V for the 1836560. Voltage and current ratings are suitable for equivalent electrical applications within these specified ranges.

Q: How do housing material differences affect performance?

A: The 1900060 uses polybutylene terephthalate (PBT), the 1757682 uses polyamide (PA/nylon), and the 1836560 uses liquid crystal polymer (LCP). All three materials maintain UL94 V-0 flammability rating. Material selection affects thermal performance and mechanical properties; LCP (1836560) provides superior thermal stability and is rated for -40°C to 100°C operation, while the other two lack specified operating temperature ranges.

Q: Are there packaging or inventory considerations?

A: The 1900060 is listed as obsolete with 1011 pieces in stock. Both 1757682 (1024 pieces) and 1836560 (1075 pieces) are active products with comparable inventory availability. For new designs, active products are recommended to ensure long-term supply continuity.

Q: What is the significance of contact tail length differences?

A: Contact tail length affects insertion depth into PCB plated through-holes and solder joint formation. The 1900060 has 4.19mm tails, 1757682 has 4.60mm, and 1836560 has 2.00mm. PCB design must accommodate the specific tail length of the selected substitute to ensure proper electrical connection and mechanical stability.