Phoenix Contact 1899867 Terminal Block Header - Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 1899867 is a 4-position terminal block header with male pins, shrouded design, and 0.197" (5.00mm) pitch in 90° right-angle through-hole configuration. This component is classified as obsolete, making identification of active equivalent parts essential for ongoing production and maintenance applications. The part operates at 12A (IEC) / 15A (UL) and 400V (IEC) / 300V (UL), with press-fit termination and UL94 V-0 flammability rating.

Substiute Parts

1899867

Phoenix ContactIn Stock: 11041899867 Datasheet

Current PartRFQ

1757491

Phoenix ContactIn Stock: 30061757491 Datasheet

SimilarRFQ

1836366

Phoenix ContactIn Stock: 10031836366 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Phoenix Contact 1899867 is determined by the following critical parameters:

Mandatory Matching Parameters:

• Number of Positions: 4
• Pitch: 0.197" (5.00mm)
• Header Orientation: 90°, Right Angle
• Mounting Type: Through Hole
• Type: Header, Male Pins, Shrouded (4 Side)
• Current Rating: 12A (IEC) minimum
• Voltage Rating: 400V (IEC) minimum or 300V (UL) minimum
• Contact Mating Finish: Tin

Allowable Variations:

• Termination Style: Press-Fit (original) may be substituted with Solder termination
• Housing Material: Polybutylene Terephthalate (PBT) may be substituted with Polyamide (PA) / Nylon
• Contact Tail Length: Variation permitted within mechanical compatibility constraints
• Insulation Height: Must remain 0.339" (8.61mm) or equivalent
• Product Status: Active parts preferred over obsolete

The identified substitute parts (1757491 and 1836366) maintain all mandatory parameters while offering active product status and improved availability.

Parameter Comparison

Engineering Selection Recommendations

Phoenix Contact 1757491 (COMBICON MSTBA Series)

Part 1757491 is the primary substitute for the obsolete 1899867. This part maintains full electrical compatibility with identical current (12A IEC, 15A UL) and voltage (400V IEC, 300V UL) ratings. The primary difference is termination style: 1757491 uses solder termination versus the original press-fit design. Housing material differs (Polyamide/Nylon versus PBT), and contact tail length is slightly shorter (0.138" versus 0.165"). The part holds active product status with ROHS3 compliance and significantly higher inventory availability (2956 units). This part is suitable for applications where solder termination is compatible with existing assembly processes.

Phoenix Contact 1836366 (COMBICON CCA Series)

Part 1836366 serves as a secondary substitute option. This part maintains the 4-position, 5.00mm pitch, 90° right-angle through-hole configuration with 12A IEC current rating. However, the IEC voltage rating is reduced to 320V (versus 400V on the original). UL ratings are not specified for this part. Housing material and contact tail length specifications are not provided. The part holds active product status with ROHS3 compliance. Selection of this part requires confirmation that the 320V IEC rating is acceptable for the intended application.

Selection Criteria:

• For direct functional replacement with solder-compatible assembly: Select 1757491
• For applications with reduced voltage requirements (320V IEC maximum): 1836366 is acceptable
• Verify termination method compatibility with existing PCB assembly processes before final selection
• Confirm mechanical fit given variations in contact tail length and housing material

Frequently Asked Questions (FAQ)

Q: Can Phoenix Contact 1757491 directly replace 1899867 in existing designs?

A: Part 1757491 maintains electrical compatibility (12A IEC, 400V IEC, 15A UL, 300V UL) and mechanical form factor (4-position, 5.00mm pitch, 90° right-angle). The primary difference is termination method: 1757491 uses solder termination while 1899867 uses press-fit. Direct replacement is possible if the PCB assembly process supports solder termination. Contact tail length differs slightly (0.138" versus 0.165"), which may require PCB layout verification.

Q: What is the voltage difference between 1757491 and 1836366?

A: Phoenix Contact 1757491 maintains the original 400V IEC rating, while 1836366 is rated for 320V IEC. For applications operating at voltages between 320V and 400V IEC, part 1836366 is not suitable. Part 1757491 is recommended for full voltage compatibility.

Q: Are both substitute parts RoHS compliant?

A: Yes. Phoenix Contact 1757491 and 1836366 both hold ROHS3 compliance status, meeting current regulatory requirements. The original 1899867 is RoHS Compliant (earlier standard).

Q: Does housing material affect electrical performance?

A: The housing material difference (PBT in 1899867 versus Polyamide/Nylon in 1757491) does not affect electrical ratings or current/voltage specifications. Both materials meet UL94 V-0 flammability requirements. Material selection is based on mechanical and environmental application requirements.

Q: Which substitute part has better availability?

A: Phoenix Contact 1757491 has the highest inventory availability at 2956 units in stock, compared to 929 units for 1836366. For production applications requiring immediate availability, 1757491 is the preferred choice.

Q: Can I use 1836366 if voltage requirements are below 320V?

A: Yes. If your application operates at voltages not exceeding 320V IEC, part 1836366 is electrically compatible. However, complete specification data (UL ratings, housing material, contact tail length) is not provided for this part. Confirmation with Phoenix Contact is recommended before design implementation.