Phoenix Contact 1897898 Terminal Block Header - Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 1897898 is an 11-position terminal block header with male pins, shrouded on four sides, featuring 0.150" (3.81mm) pitch and right-angle through-hole mounting. This component is classified as obsolete, making identification of suitable substitute parts essential for ongoing system maintenance and new design implementations. The part operates at 8A (IEC/UL) and 250V (IEC) / 300V (UL), with press-fit termination and UL94 V-0 flammability rating.

Substiute Parts

1897898

Phoenix ContactIn Stock: 8721897898 Datasheet

Current PartRFQ

1803361

Phoenix ContactIn Stock: 9841803361 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Phoenix Contact 1897898 is determined by strict equivalence across the following critical parameters:

• Electrical Performance: Current rating (8A IEC/UL) and voltage rating (250V IEC / 300V UL) must be maintained or exceeded
• Physical Configuration: 11 positions, 0.150" (3.81mm) pitch, right-angle orientation, and male pin header type
• Mechanical Compatibility: Through-hole mounting with shrouded (4-side) design
• Material & Safety Compliance: PBT housing, UL94 V-0 flammability rating, and tin contact finish
• Regulatory Compliance: RoHS compliance status

The substitute part Phoenix Contact 1803361 meets all critical electrical, mechanical, and compliance parameters. The primary distinction is the termination method (solder vs. press-fit) and minor dimensional variations in contact tail length and insulation height, which do not affect functional equivalence in standard applications.

Parameter Comparison

Engineering Selection Recommendations

The Phoenix Contact 1803361 is the direct substitute for the obsolete 1897898. Both components maintain identical electrical ratings (8A / 250V IEC, 8A / 300V UL), physical configuration (11 positions, 3.81mm pitch, right-angle male header), and safety compliance (UL94 V-0, PBT housing, tin finish).

The 1803361 is classified as active product status, ensuring ongoing availability and supply chain continuity. The component carries ROHS3 compliance, exceeding the RoHS compliance of the original part. Minor dimensional differences in contact tail length (0.004" variance) and insulation height (0.009" variance) fall within standard manufacturing tolerances and do not impact functional compatibility in standard through-hole PCB applications.

The primary consideration is termination method: the 1897898 uses press-fit termination, while the 1803361 requires solder termination. This difference necessitates PCB design modification to accommodate solder pad geometry rather than press-fit holes. For applications where press-fit termination is mandatory, alternative solutions outside the provided substitute list must be evaluated.

Frequently Asked Questions (FAQ)

Q: Can the 1803361 directly replace the 1897898 without PCB modification?

A: Electrical and mechanical compatibility is maintained. However, termination method differs (solder vs. press-fit), requiring PCB pad redesign. Direct socket compatibility is not possible without layout changes.

Q: Are the dimensional differences between contact tail length and insulation height significant?

A: The variations (0.004" tail length, 0.009" insulation height) are within standard manufacturing tolerances for this component category and do not affect functional performance in standard applications.

Q: Does the 1803361 meet the same safety and compliance standards?

A: Yes. Both components maintain UL94 V-0 flammability rating, PBT housing material, and tin contact finish. The 1803361 carries ROHS3 compliance, which exceeds the RoHS compliance of the original part.

Q: What is the inventory status for these parts?

A: The 1897898 (obsolete) has 859 pcs in stock. The 1803361 (active) has 905 pcs in stock, providing superior long-term availability.

Q: Are there electrical performance differences between the two parts?

A: No. Both components are rated at 8A (IEC/UL) and 250V (IEC) / 300V (UL) with identical contact mating finish (tin) and housing material (PBT).

Q: Which series does each part belong to?

A: The 1897898 belongs to the COMBICON EMC series. The 1803361 belongs to the COMBICON MC series. Both are Phoenix Contact COMBICON terminal block families.