Weidmüller 1893360000 Terminal Block Plug - Equivalent & Substitute Parts

Part Overview

The Weidmüller 1893360000 is a 22-position terminal block plug with female sockets, 0.200" (5.08mm) pitch, designed for 180° free-hanging in-line applications. This component features screwless spring cage termination and is rated for 17A at 400V (IEC) or 15A at 300V (UL). The part is classified as obsolete, making identification of active equivalent models essential for procurement and system continuity.

Substiute Parts

1893360000

WeidmüllerIn Stock: 7841893360000 Datasheet

Current PartRFQ

1014340000

WeidmüllerIn Stock: 8061014340000 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the obsolete 1893360000 is based on the following critical parameters that must remain constant or compatible:

• Position Count & Pitch: 22 positions at 0.200" (5.08mm) spacing
• Connector Type: Plug with female sockets
• Mounting Configuration: Free hanging (in-line) orientation
• Wire Gauge Compatibility: 12-26 AWG (0.2-2.5mm²)
• Operating Temperature Range: -50°C ~ 100°C
• Voltage Rating: 400V (IEC) or 300V (UL) minimum
• Series Family: Omnimate BL

The substitute part 1014340000 maintains all critical mechanical and electrical parameters while offering improved current ratings and active product status.

Parameter Comparison

Engineering Selection Recommendations

The Weidmüller 1014340000 is the direct active substitute for the obsolete 1893360000. Both components are members of the Omnimate BL series and share identical mechanical interfaces, pitch, position count, and wire gauge compatibility.

Key advantages of the 1014340000:

• Active Product Status: Currently manufactured and supported by Weidmüller
• Enhanced Current Ratings: 24A (IEC) and 18.5A (UL) versus 17A and 15A respectively
• Improved Termination Technology: Leg spring push-in spring design versus tension clamp
• IP20 Ingress Protection: Provides environmental protection not specified in the original part
• RoHS Compliance: Meets current regulatory requirements

The substitute maintains full mechanical and electrical compatibility with existing connector housings and mating components designed for the 1893360000.

Frequently Asked Questions (FAQ)

Q: Can the 1014340000 directly replace the 1893360000 in existing applications?

A: Yes. Both components share identical pitch (5.08mm), position count (22), mounting configuration (free hanging in-line), wire gauge range (12-26 AWG), and operating temperature range (-50°C to 100°C). The substitute provides equal or superior electrical performance.

Q: What is the difference in termination technology between these parts?

A: The 1893360000 uses screwless spring cage tension clamp termination. The 1014340000 uses leg spring push-in spring termination. Both are screwless designs suitable for the same wire gauge range.

Q: Are the current ratings compatible with my application?

A: The 1014340000 provides higher current ratings (24A IEC, 18.5A UL) compared to the 1893360000 (17A IEC, 15A UL). If your application requires 17A or less at 400V (IEC) or 15A or less at 300V (UL), the substitute is fully compatible. Applications requiring higher current benefit from the improved ratings.

Q: What packaging differences exist between these parts?

A: The 1893360000 packaging is unspecified. The 1014340000 is supplied in box packaging. This does not affect component functionality or compatibility.

Q: Are both parts compliant with current standards?

A: Both components meet UL94 V-0 flammability requirements, REACH regulations, and EAR99 export classification. The 1014340000 additionally carries RoHS compliance certification.

Q: Can I use the 1014340000 in new designs?

A: Yes. The 1014340000 is an active product with full manufacturer support and is the recommended choice for new applications requiring 22-position, 5.08mm pitch terminal block plugs in the Omnimate BL series.