TE Connectivity 1-87227-5 Rectangular Connector Header Equivalent & Substitute Parts

Part Overview

The TE Connectivity 1-87227-5 is an active rectangular connector header manufactured under the AMPMODU Mod II series. This through-hole vertical header connector features 30 positions arranged in 2 rows with 0.100" (2.54mm) pitch spacing, designed for board-to-board or cable interconnection applications. The connector utilizes male pin contacts with gold-plated mating surfaces and phosphor bronze contact material, rated for 3A current at operating temperatures between -65°C and 105°C. Identification of equivalent and substitute parts becomes necessary when managing component availability, optimizing procurement across multiple suppliers, or addressing supply chain constraints while maintaining electrical and mechanical compatibility.

Substiute Parts

1-87227-5

TE Connectivity AMP ConnectorsIn Stock: 9771-87227-5 Datasheet

Current PartRFQ

A1-30PA-2.54DSA(71)

Hirose Electric Co LtdIn Stock: 1200A1-30PA-2.54DSA(71) Datasheet

SimilarRFQ

BBD-115-T-A

Samtec Inc.In Stock: 1064BBD-115-T-A Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TE Connectivity 1-87227-5 is determined by strict alignment of the following critical parameters: connector type (header), contact type (male pin), number of positions (30), number of rows (2), mating pitch (0.100"/2.54mm), row spacing (0.100"/2.54mm), mounting type (through hole), termination method (solder), and fastening type (push-pull). All substitute parts listed maintain these core electrical and mechanical specifications, ensuring functional compatibility in board-to-board and cable interconnection applications. Secondary parameters including contact material, contact finish composition, insulation material type, and operating temperature range may vary between substitutes while preserving the primary interconnection function. Compliance certifications (RoHS, REACH, ECCN) and moisture sensitivity levels are evaluated to confirm suitability for specific regulatory and environmental requirements.

Parameter Comparison

Engineering Selection Recommendations

All three connector headers maintain active product status with continuous manufacturer support and availability. The TE Connectivity 1-87227-5 and Samtec BBD-115-T-A both carry ROHS3 compliance certification, while the Hirose A1-30PA-2.54DSA(71) meets RoHS compliance requirements. All three parts are classified as REACH Affected or REACH Compliant and carry EAR99 export classification.

The TE Connectivity 1-87227-5 operates across the widest temperature range (-65°C to 105°C) and features gold-plated mating contacts with phosphor bronze material composition. This configuration provides optimal performance in extended temperature environments and corrosion-resistant applications.

The Hirose A1-30PA-2.54DSA(71) operates within a narrower temperature range (-55°C to 85°C) but provides explicit voltage rating specification (200V) and maintains 3A current rating. The PBT insulation material offers enhanced mechanical properties compared to standard thermoplastic.

The Samtec BBD-115-T-A extends the upper operating temperature limit to 125°C, accommodating high-temperature applications. This part features tin-plated mating contacts and glass-filled polyester insulation, providing different material characteristics suitable for specific thermal environments.

Selection between these substitutes depends on application-specific requirements: temperature extremes, voltage specifications, contact material preferences, and insulation material compatibility with the target application environment.

Frequently Asked Questions (FAQ)

Q: What are the critical parameters that determine if a connector header can substitute for the TE Connectivity 1-87227-5?

A: The following parameters must match exactly: 30-position count, 2-row configuration, 0.100" (2.54mm) mating pitch, 0.100" (2.54mm) row spacing, through-hole mounting type, solder termination, push-pull fastening, male pin contact type, and header connector classification. All listed substitutes meet these requirements.

Q: Can the Hirose A1-30PA-2.54DSA(71) be used in applications requiring the full -65°C to 105°C temperature range of the TE Connectivity 1-87227-5?

A: No. The Hirose part operates only from -55°C to 85°C. Applications requiring the extended lower temperature limit (-65°C) or upper temperature limit (105°C) must use the TE Connectivity 1-87227-5 or evaluate the Samtec BBD-115-T-A, which supports -55°C to 125°C operation.

Q: What is the difference in contact length between these three connector headers?

A: The TE Connectivity 1-87227-5 features the longest overall contact length at 0.533" (13.55mm), while the Hirose A1-30PA-2.54DSA(71) measures 0.454" (11.54mm) and the Samtec BBD-115-T-A measures 0.460" (11.68mm). Contact length variations affect mating depth and board-to-board spacing requirements.

Q: Are all three connectors RoHS compliant?

A: Yes. The TE Connectivity 1-87227-5 and Samtec BBD-115-T-A are ROHS3 compliant. The Hirose A1-30PA-2.54DSA(71) is RoHS compliant. All three meet regulatory requirements for hazardous substance restrictions.

Q: What packaging formats are available for these substitute parts?

A: The TE Connectivity 1-87227-5 is supplied in Bulk packaging. The Hirose A1-30PA-2.54DSA(71) is supplied in Tray packaging. The Samtec BBD-115-T-A is supplied in Tube packaging. Packaging format selection depends on assembly process requirements and inventory management protocols.

Q: How do the contact materials differ between these connectors?

A: The TE Connectivity 1-87227-5 uses phosphor bronze contacts with gold plating. The Hirose A1-30PA-2.54DSA(71) uses brass contacts with gold plating on mating surfaces and tin plating on posts. The Samtec BBD-115-T-A contact material is not specified but features tin-plated mating surfaces and nickel-plated posts. Material selection affects electrical conductivity, corrosion resistance, and long-term reliability.

Q: Can the Samtec BBD-115-T-A be used in high-temperature applications above 105°C?

A: Yes. The Samtec BBD-115-T-A supports operating temperatures up to 125°C, making it suitable for high-temperature applications where the TE Connectivity 1-87227-5 (limited to 105°C) cannot be used.

Q: What is the moisture sensitivity level for all three connectors?

A: All three connectors carry Moisture Sensitivity Level 1 (Unlimited), indicating no moisture sensitivity restrictions during storage, handling, or assembly processes.

Q: Are there differences in insulation material between the three connectors?

A: Yes. The TE Connectivity 1-87227-5 uses thermoplastic insulation. The Hirose A1-30PA-2.54DSA(71) uses polybutylene terephthalate (PBT). The Samtec BBD-115-T-A uses polyester with glass reinforcement. Material selection affects mechanical strength, thermal stability, and chemical resistance properties.