TE Connectivity AMP Connectors 1-87224-2 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 1-87224-2 is an active rectangular connector header designed for through-hole mounting applications. This 12-position, single-row connector operates at 3A current rating with a 0.100" (2.54mm) pitch and is part of the AMPMODU Mod II series. The connector features gold-plated phosphor bronze contacts with solder termination and push-pull fastening. Substitute parts are identified to address inventory availability, extended operating temperature ranges, or alternative material specifications while maintaining core electrical and mechanical compatibility.

Substiute Parts

1-87224-2

TE Connectivity AMP ConnectorsIn Stock: 11581-87224-2 Datasheet

Current PartRFQ

PBC12SFAN

Sullins Connector SolutionsIn Stock: 2727PBC12SFAN Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution between the TE Connectivity 1-87224-2 and the Sullins Connector Solutions PBC12SFAN is determined by alignment of the following critical parameters:

Matching Parameters:

• Connector Type: Both are headers with male pin contacts
• Number of Positions: Both feature 12 positions in a single row
• Pitch - Mating: Both operate at 0.100" (2.54mm) spacing
• Mounting Type: Both are through-hole mounted
• Termination: Both use solder termination
• Current Rating: Both rated at 3A
• Contact Material: Both use phosphor bronze
• Contact Finish - Mating: Both feature gold plating
• Shrouding: Both are unshrouded
• Style: Both support board-to-board or cable applications
• Fastening Type: Both use push-pull fastening
• Material Flammability Rating: Both meet UL94 V-0
• Insulation Color: Both are black
• ECCN Classification: Both classified as EAR99
• HTSUS Code: Both classified as 8536.69.4040

Allowable Variations:

• Contact Length - Post: 0.125" (3.18mm) versus 0.120" (3.05mm)
• Overall Contact Length: 0.533" (13.55mm) versus 0.538" (13.67mm)
• Insulation Height: 0.090" (2.29mm) versus 0.100" (2.54mm)
• Contact Finish Thickness - Mating: 15.0µin (0.38µm) versus 10.0µin (0.25µm)
• Contact Finish - Post: Gold versus Tin
• Insulation Material: Thermoplastic versus Polybutylene Terephthalate (PBT)
• Operating Temperature: -65°C ~ 105°C versus -65°C ~ 125°C
• RoHS Status: RoHS Compliant versus ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited) versus Not Applicable
• REACH Status: REACH Affected versus REACH Unaffected

Parameter Comparison

Engineering Selection Recommendations

Both the TE Connectivity 1-87224-2 and Sullins PBC12SFAN are active products with equivalent electrical and mechanical specifications for 12-position, 2.54mm pitch header applications. Selection between these parts is based on the following criteria:

TE Connectivity 1-87224-2 Selection Criteria:

• Applications requiring operating temperatures up to 105°C
• Designs specifying RoHS Compliant (non-ROHS3) certification
• Systems subject to REACH Affected material restrictions
• Moisture-sensitive applications requiring MSL 1 classification
• Designs requiring gold-plated post finishes

Sullins PBC12SFAN Selection Criteria:

• Applications requiring extended operating temperatures up to 125°C
• Designs specifying ROHS3 Compliant certification
• Systems not subject to REACH material restrictions
• Designs utilizing breakaway connector features
• Applications where tin-plated post finishes are acceptable
• Designs utilizing PBT insulation material for enhanced thermal stability

Both parts maintain identical electrical performance at 3A current rating, identical mating contact geometry, and identical pitch spacing. Both are active products with full inventory availability.

Frequently Asked Questions (FAQ)

Q: Can the Sullins PBC12SFAN directly replace the TE Connectivity 1-87224-2 in existing designs?

A: Direct replacement is possible for applications operating within the overlapping temperature range (-65°C to 105°C) and where the insulation material change from thermoplastic to PBT does not conflict with design specifications. The post contact finish difference (gold versus tin) and insulation height variation (0.090" versus 0.100") must be evaluated against specific board layout and mating connector requirements.

Q: What is the significance of the "Breakaway" feature on the Sullins PBC12SFAN?

A: The breakaway feature allows individual positions to be separated from the connector body after assembly. This functionality is not present on the TE Connectivity 1-87224-2 and may provide design flexibility for applications requiring modular connector configurations.

Q: Are there compatibility concerns with the contact post length difference?

A: The contact post length difference (0.125" versus 0.120") represents a 0.005" (0.127mm) variation. This difference must be evaluated against PCB pad design, solder joint requirements, and mating connector specifications to ensure adequate solder fillet formation and mechanical stability.

Q: How does the insulation material difference affect performance?

A: The TE Connectivity 1-87224-2 uses thermoplastic insulation, while the Sullins PBC12SFAN uses Polybutylene Terephthalate (PBT). PBT provides enhanced thermal stability and is suitable for the extended operating temperature range (-65°C to 125°C) of the Sullins part. Thermoplastic insulation is rated to 105°C.

Q: What is the impact of the contact finish thickness variation?

A: The TE Connectivity 1-87224-2 features 15.0µin (0.38µm) gold plating on mating contacts, while the Sullins PBC12SFAN features 10.0µin (0.25µm). Both thicknesses provide adequate corrosion protection and electrical conductivity for 3A applications. The thicker plating on the TE part may provide extended contact life in high-cycle mating applications.

Q: Are both parts suitable for high-temperature applications?

A: The Sullins PBC12SFAN is rated to 125°C and is suitable for extended high-temperature applications. The TE Connectivity 1-87224-2 is rated to 105°C and is suitable for standard industrial temperature ranges. Application temperature requirements determine which part is appropriate.

Q: Do both parts meet current environmental compliance standards?

A: Both parts are RoHS compliant. The TE Connectivity 1-87224-2 is RoHS Compliant and REACH Affected. The Sullins PBC12SFAN is ROHS3 Compliant and REACH Unaffected. Applications subject to specific regulatory requirements must select the appropriate part based on compliance status.

Q: What is the inventory status for both parts?

A: The TE Connectivity 1-87224-2 has 1096 pieces in stock. The Sullins PBC12SFAN has 2662 pieces in stock. Both parts are available as new original components in bulk packaging.