TE Connectivity 1-87220-4 Equivalent & Substitute Parts

Part Overview

The TE Connectivity 1-87220-4 is a rectangular connector header manufactured under the AMPMODU Mod II series. This through-hole connector features 14 vertical positions with 0.100" (2.54mm) pitch spacing, designed for board-to-board or cable interconnection applications. The connector utilizes male pin contacts with gold-plated phosphor bronze construction and solder termination. Product status is Active with 922 units in current inventory. Equivalent and substitute parts are identified to provide design flexibility, accommodate supply chain variations, and support alternative sourcing strategies while maintaining electrical and mechanical compatibility within specified parameter tolerances.

Key Parameters

Parameter	Value
Connector Type	Header
Contact Type	Male Pin
Number of Positions	14
Number of Rows	1
Pitch - Mating	0.100" (2.54mm)
Mounting Type	Through Hole
Termination	Solder
Fastening Type	Push-Pull
Shrouding	Unshrouded
Contact Shape	Square
Insulation Material	Thermoplastic
Operating Temperature Range	-65°C ~ 105°C
Current Rating	3A
Material Flammability Rating	UL94 V-0
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the TE Connectivity 1-87220-4 is determined by strict alignment with the following critical parameters: 14-position count, 0.100" (2.54mm) mating pitch, male pin contact type, through-hole mounting, solder termination, push-pull fastening, unshrouded configuration, single-row layout, and square contact geometry. All identified substitute parts meet these core electrical and mechanical requirements. Variations in secondary parameters including contact material composition, contact finish specifications, insulation material type, operating temperature range, and current rating are documented to enable informed selection based on specific application requirements. Compliance certifications including RoHS status and REACH classification are provided to support regulatory and procurement decision-making. Substitute parts are sourced from manufacturers including Molex, 3M, Hirose Electric, and Harwin Inc., each offering active product status with documented inventory availability.

Parameter Comparison

Parameter	TE Connectivity 1-87220-4	Molex 0901200134	3M 929647-09-14-EU	3M 929834-04-14	Hirose A2-14PA-2.54DSA(71)	Harwin M20-9991445	Harwin M20-9991446
Manufacturer	TE Connectivity	Molex	3M	3M	Hirose Electric	Harwin Inc.	Harwin Inc.
Part Number	1-87220-4	0901200134	929647-09-14-EU	929834-04-14	A2-14PA-2.54DSA(71)	M20-9991445	M20-9991446
Series	AMPMODU Mod II	C-Grid III 90120	929	929	A2	M20	M20
Connector Type	Header	Header, Breakaway	Header, Breakaway	Header, Breakaway	Header	Header, Cuttable	Header, Cuttable
Contact Type	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin
Number of Positions	14	14	14	14	14	14	14
Number of Rows	1	1	1	1	1	1	1
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Fastening Type	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull
Shrouding	Unshrouded	Unshrouded	Unshrouded	Unshrouded	Unshrouded	Unshrouded	Unshrouded
Contact Shape	Square	Square	Square	Square	Square	Square	Square
Contact Material	Phosphor Bronze	Brass	Copper Alloy	Copper Alloy	Brass	Brass	Brass
Contact Finish - Mating	Gold	Tin	Gold	Tin-Lead	Gold	Gold	Tin
Contact Finish Thickness - Mating	30.0µin (0.76µm)	118.1µin (3.00µm)	10.0µin (0.25µm)	100.0µin (2.54µm)	8.00µin (0.203µm)	Not Specified	Not Specified
Insulation Material	Thermoplastic	Polyester, Glass Filled	Polycyclohexylenedimethylene Terephthalate (PCT)	Polybutylene Terephthalate (PBT), Polyester, Glass Filled	Polybutylene Terephthalate (PBT)	Polyamide (PA6T), Nylon 6T	Polyamide (PA6T), Nylon 6T
Insulation Height	0.090" (2.29mm)	0.098" (2.50mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Operating Temperature Range	-65°C ~ 105°C	-55°C ~ 125°C	-40°C ~ 105°C	-40°C ~ 105°C	-55°C ~ 85°C	-40°C ~ 105°C	-40°C ~ 105°C
Current Rating	3A	Not Specified	2.5A	2.5A	3A	3A per Contact	3A per Contact
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
Insulation Color	Black	Black	Black	Black	Black	Black	Black
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	RoHS Compliant	RoHS non-compliant	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	Not Applicable	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
REACH Status	REACH Affected	REACH Unaffected	REACH Unaffected	REACH Affected	Not Specified	REACH Unaffected	REACH Unaffected
Product Status	Active	Active	Active	Active	Active	Active	Active
Inventory Availability	922 Pcs	1207 Pcs	1341 Pcs	932 Pcs	1009 Pcs	1669 Pcs	2421 Pcs

Engineering Selection Recommendations

All identified substitute parts maintain active product status and meet the core electrical and mechanical specifications of the TE Connectivity 1-87220-4. Selection among equivalent parts is determined by compliance requirements and application-specific constraints.

RoHS3 Compliant Options: The Molex 0901200134, Hirose A2-14PA-2.54DSA(71), Harwin M20-9991445, and Harwin M20-9991446 all carry ROHS3 Compliant certification, matching the primary part's regulatory status. These options are suitable for applications requiring full RoHS3 compliance.

RoHS Compliant (Non-ROHS3) Option: The 3M 929647-09-14-EU carries RoHS Compliant status without ROHS3 designation. This part is suitable for applications requiring RoHS compliance but not specifically ROHS3 certification.

RoHS Non-Compliant Option: The 3M 929834-04-14 is RoHS non-compliant and carries REACH Affected status. This part is restricted to applications where RoHS compliance is not required and REACH restrictions do not apply.

REACH Unaffected Options: The Molex 0901200134, 3M 929647-09-14-EU, Harwin M20-9991445, and Harwin M20-9991446 all carry REACH Unaffected status, providing regulatory flexibility for international supply chains.

Temperature Range Considerations: The Molex 0901200134 supports -55°C ~ 125°C, exceeding the primary part's -65°C ~ 105°C range. The Hirose A2-14PA-2.54DSA(71) supports -55°C ~ 85°C, which is narrower than the primary part. The 3M and Harwin options support -40°C ~ 105°C, which is narrower at the low end.

Current Rating Alignment: The Hirose A2-14PA-2.54DSA(71), Harwin M20-9991445, and Harwin M20-9991446 all support 3A current rating, matching the primary part. The 3M options specify 2.5A, which is lower than the primary part's 3A rating.

Frequently Asked Questions (FAQ)

Q: What are the critical parameters that determine substitution compatibility for the TE Connectivity 1-87220-4?

A: The critical parameters are: 14-position count, 0.100" (2.54mm) mating pitch, male pin contact type, through-hole mounting, solder termination, push-pull fastening, unshrouded configuration, single-row layout, and square contact geometry. All identified substitute parts meet these specifications.

Q: Can I use the 3M 929834-04-14 as a direct replacement in a RoHS-compliant application?

A: No. The 3M 929834-04-14 is RoHS non-compliant and carries REACH Affected status. It is not suitable for applications requiring RoHS compliance. Use ROHS3 Compliant or RoHS Compliant alternatives instead.

Q: What is the difference between the Harwin M20-9991445 and M20-9991446?

A: Both parts are identical in electrical and mechanical specifications. The primary difference is contact finish: M20-9991445 features gold-plated mating contacts, while M20-9991446 features tin-plated mating contacts. Both support 3A current rating and -40°C ~ 105°C operating temperature.

Q: Does the Hirose A2-14PA-2.54DSA(71) support the same current rating as the TE Connectivity 1-87220-4?

A: Yes. Both parts support 3A current rating. However, the Hirose part has a narrower operating temperature range of -55°C ~ 85°C compared to the TE Connectivity part's -65°C ~ 105°C range.

Q: Which substitute part has the highest inventory availability?

A: The Harwin M20-9991446 has the highest inventory availability with 2421 units in stock, followed by the Harwin M20-9991445 with 1669 units.

Q: Are all substitute parts available in the same packaging as the TE Connectivity 1-87220-4?

A: No. The TE Connectivity 1-87220-4 is packaged in Bulk. The Molex 0901200134 is packaged in Tray. The 3M 929647-09-14-EU, 3M 929834-04-14, Hirose A2-14PA-2.54DSA(71), Harwin M20-9991445, and Harwin M20-9991446 are all packaged in Bulk.

Q: What is the voltage rating for the TE Connectivity 1-87220-4?

A: The voltage rating is not specified in the provided technical data. The Hirose A2-14PA-2.54DSA(71) specifies 200V voltage rating.

Q: Can I substitute the TE Connectivity 1-87220-4 with the 3M 929647-09-14-EU in a low-temperature application requiring -65°C operation?

A: No. The 3M 929647-09-14-EU supports -40°C ~ 105°C operating temperature, which does not meet the -65°C minimum requirement. Use the Molex 0901200134, which supports -55°C ~ 125°C, or verify that the application can operate within the 3M part's -40°C minimum specification.

Q: What contact material is used in the TE Connectivity 1-87220-4?

A: The TE Connectivity 1-87220-4 uses phosphor bronze contact material with gold plating. Substitute parts use brass or copper alloy contact materials with various plating options including gold, tin, and tin-lead finishes.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message