TE Connectivity AMP Connectors 1-87220-2 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 1-87220-2 is an active rectangular connector header designed for through-hole mounting applications. This 12-position, single-row connector operates at 3A current rating with a 0.100" (2.54mm) pitch and is part of the AMPMODU Mod II series. The connector features gold-plated phosphor bronze contacts with solder termination and push-pull fastening. Finding equivalent and substitute parts is necessary to ensure design flexibility, manage supply chain continuity, and accommodate alternative sourcing requirements while maintaining electrical and mechanical compatibility.

Substiute Parts

1-87220-2

TE Connectivity AMP ConnectorsIn Stock: 10671-87220-2 Datasheet

Current PartRFQ

PBC12SFAN

Sullins Connector SolutionsIn Stock: 2727PBC12SFAN Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TE Connectivity 1-87220-2 are identified based on strict electrical and mechanical parameter alignment. The critical parameters determining substitution eligibility are:

• Connector Type & Contact Configuration: Header with male pin contacts
• Position Count & Row Configuration: 12 positions in a single row
• Pitch Specification: 0.100" (2.54mm) mating pitch
• Mounting & Termination: Through-hole solder termination
• Current Capacity: 3A rating
• Contact Material & Finish: Phosphor bronze with gold mating surface
• Operating Temperature: Functional range compatibility
• Fastening Type: Push-pull mechanism
• Shrouding Configuration: Unshrouded design
• Compliance Standards: RoHS and REACH compliance status

The Sullins Connector Solutions PBC12SFAN meets all critical substitution parameters while offering alternative insulation material composition and extended operating temperature range.

Parameter Comparison

Engineering Selection Recommendations

Both the TE Connectivity 1-87220-2 and Sullins PBC12SFAN connectors are active products with equivalent electrical and mechanical specifications suitable for 12-position, 2.54mm pitch header applications. Selection between these parts should be based on the following engineering considerations:

TE Connectivity 1-87220-2 is appropriate for applications requiring REACH Affected component documentation and thermoplastic insulation material specifications. This part maintains an operating temperature range of -65°C to 105°C and features gold post finish.

Sullins PBC12SFAN is appropriate for applications requiring REACH Unaffected component status and PBT insulation material. This part offers an extended operating temperature range of -65°C to 125°C, making it suitable for higher-temperature environments. The breakaway header feature provides additional design flexibility. The tin post finish differs from the main part specification.

Both parts maintain RoHS compliance, UL94 V-0 flammability rating, and identical electrical current ratings. The insulation height difference of 0.010" (0.25mm) and contact post length variation of 0.005" (0.13mm) are within typical manufacturing tolerances for this connector category.

Frequently Asked Questions (FAQ)

Q: Can the Sullins PBC12SFAN directly replace the TE Connectivity 1-87220-2 in existing designs?

A: The Sullins PBC12SFAN is mechanically and electrically compatible for board-level substitution. The mating pitch, contact count, contact material, and current rating are identical. Minor dimensional variations in insulation height (0.010" difference) and contact post length (0.005" difference) are within standard connector tolerances. The contact post finish differs (tin versus gold), which may affect solderability characteristics in specific applications.

Q: What are the key differences between these two connector models?

A: The primary differences are: (1) Insulation material composition (thermoplastic versus PBT), (2) Operating temperature upper limit (105°C versus 125°C), (3) Contact post finish (gold versus tin), (4) REACH compliance status (Affected versus Unaffected), (5) Insulation height tolerance (0.090" versus 0.100"), and (6) Breakaway header feature availability on the Sullins part.

Q: Are both connectors RoHS compliant?

A: Yes. The TE Connectivity 1-87220-2 is RoHS Compliant, and the Sullins PBC12SFAN is ROHS3 Compliant. Both meet RoHS requirements for hazardous substance restrictions.

Q: What is the significance of the contact post finish difference?

A: The TE Connectivity part features gold post finish, while the Sullins part features tin post finish. This affects solder wetting characteristics and long-term reliability in specific environmental conditions. Gold provides superior corrosion resistance, while tin offers standard solderability. Application requirements determine which finish is appropriate.

Q: Can these connectors be used in high-temperature applications?

A: The TE Connectivity 1-87220-2 operates to 105°C maximum. The Sullins PBC12SFAN operates to 125°C maximum. For applications requiring sustained operation above 105°C, the Sullins part is the appropriate selection.

Q: Are there packaging or inventory considerations for these parts?

A: Both parts are available in bulk packaging. The TE Connectivity 1-87220-2 has 1011 pieces in stock, while the Sullins PBC12SFAN has 2662 pieces in stock. Availability should be confirmed with the component supplier for specific project timelines.

Q: What does the breakaway feature on the Sullins connector provide?

A: The breakaway header feature on the Sullins PBC12SFAN allows individual connector positions to be separated from the main header assembly. This provides design flexibility for applications requiring partial connector configurations or modular assembly approaches.