TE Connectivity AMP Connectors 1-87215-1 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 1-87215-1 is an active rectangular connector header designed for through-hole mounting applications. This unshrouded, vertical connector accommodates 4 positions arranged in 2 rows with 0.100" (2.54mm) pitch spacing. The connector features male pins with gold-plated circular contacts and phosphor bronze material, suitable for board-to-board or cable interconnection with push-pull fastening. The part is ROHS3 compliant, REACH affected, and rated for operating temperatures from -65°C to 105°C with a current capacity of 3A per contact.

Substitute parts are identified when equivalent rectangular connectors share the same critical electrical and mechanical parameters: connector type, contact type, pitch spacing, number of positions, row configuration, mounting method, termination type, and fastening mechanism. Substitutes must maintain compatibility with the same application requirements and environmental specifications.

Substiute Parts

1-87215-1

TE Connectivity AMP ConnectorsIn Stock: 14221-87215-1 Datasheet

Current PartRFQ

77313-122-04LF

Amphenol ICC (FCI)In Stock: 126177313-122-04LF Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for rectangular connector headers is determined by strict alignment of the following critical parameters:

Electrical Compatibility Parameters:

• Contact type (Male Pin)
• Pitch spacing (0.100" / 2.54mm)
• Current rating (3A minimum)
• Operating temperature range (must encompass or exceed -65°C ~ 105°C)

Mechanical Compatibility Parameters:

• Number of positions (4)
• Number of rows (2)
• Row spacing (0.100" / 2.54mm)
• Mounting type (Through Hole)
• Termination method (Solder)
• Fastening type (Push-Pull)
• Connector style (Board to Board or Cable)

Regulatory & Environmental Parameters:

• RoHS compliance status
• REACH compliance status
• Material flammability rating (UL94 V-0)
• Moisture sensitivity level (MSL 1)

The substitute part 77313-122-04LF (Amphenol ICC / FCI BERGSTIK®) meets all critical electrical and mechanical parameters required for direct substitution with the main part 1-87215-1.

Parameter Comparison

Engineering Selection Recommendations

Both the TE Connectivity 1-87215-1 and the Amphenol ICC / FCI 77313-122-04LF are active products with confirmed inventory availability. Selection between these parts is based on the following engineering criteria:

TE Connectivity 1-87215-1:

• ROHS3 compliant
• Circular contact geometry
• Gold finish on both mating and post contacts
• Operating temperature range: -65°C ~ 105°C
• 1315 units in stock

Amphenol ICC / FCI 77313-122-04LF:

• RoHS compliant
• Square contact geometry
• Gold finish on mating contacts; tin finish on post contacts
• Operating temperature range: -65°C ~ 130°C (extended upper limit)
• Breakaway connector option available
• 1219 units in stock

Both parts satisfy the core electrical and mechanical requirements for 4-position, 2-row, 0.100" pitch header connectors with through-hole solder termination and push-pull fastening. The substitute part provides an extended operating temperature range to 130°C, which may be advantageous in thermal-demanding applications. Contact geometry and finish differences do not affect functional compatibility in standard board-to-board or cable interconnection applications.

Frequently Asked Questions (FAQ)

Q: Can the Amphenol ICC / FCI 77313-122-04LF directly replace the TE Connectivity 1-87215-1 in existing designs?

A: Yes. Both connectors share identical pitch spacing (0.100" / 2.54mm), position count (4 positions in 2 rows), mounting method (through-hole), termination type (solder), and fastening mechanism (push-pull). Contact length variations are within acceptable tolerance ranges for standard PCB applications.

Q: What is the difference between circular and square contact geometries?

A: The TE Connectivity part features circular male pins, while the Amphenol ICC / FCI part features square male pins. Both geometries are compatible with standard 0.100" pitch receptacle connectors. Contact shape does not affect electrical performance or current-carrying capacity in this connector category.

Q: Why does the substitute part have a different post contact finish (tin vs. gold)?

A: The TE Connectivity part uses gold plating on post contacts for enhanced solderability and corrosion resistance. The Amphenol ICC / FCI part uses tin plating on post contacts, which is also suitable for solder termination and provides adequate protection during storage and assembly. Both finishes are compatible with standard PCB solder processes.

Q: Does the extended operating temperature range of the substitute part affect compatibility?

A: No. The Amphenol ICC / FCI part operates from -65°C to 130°C, which encompasses the -65°C to 105°C range of the TE Connectivity part. The extended upper temperature limit provides additional thermal margin and does not compromise compatibility with applications designed for the original part's temperature range.

Q: Are both parts RoHS compliant?

A: Yes. The TE Connectivity 1-87215-1 is ROHS3 compliant. The Amphenol ICC / FCI 77313-122-04LF is RoHS compliant. Both parts meet regulatory requirements for lead-free and restricted substance compliance.

Q: What is the moisture sensitivity level for these connectors?

A: Both parts are rated MSL 1 (Unlimited), indicating no moisture sensitivity restrictions. These connectors do not require special moisture control during storage, handling, or assembly.

Q: Can these connectors be used interchangeably in high-current applications?

A: Both parts are rated for 3A per contact. For applications requiring current levels at or below 3A per contact, the connectors are interchangeable. Applications exceeding this current rating require alternative connector designs with higher current capacity.

Q: What is the difference between the BERGSTIK® breakaway feature on the substitute part?

A: The Amphenol ICC / FCI 77313-122-04LF offers a breakaway connector option, allowing individual positions to be separated if required. The TE Connectivity part does not include this feature. For applications requiring standard fixed-position headers, this difference is not relevant to substitution compatibility.