TE Connectivity AMP 1-84984-8 FFC/FPC Connector Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP 1-84984-8 is an 18-position flat flexible connector (FFC/FPC) designed for vertical through-hole mounting on printed circuit boards with 1.00mm pitch spacing. This connector features kinked pin termination and is rated for 125V and 1A operation across a temperature range of -20°C to 85°C. The part is classified as obsolete, making identification of functionally equivalent alternatives necessary for ongoing design support, maintenance, and production continuity.

Substiute Parts

1-84984-8

TE Connectivity AMP ConnectorsIn Stock: 12071-84984-8 Datasheet

Current PartRFQ

0528061810

MolexIn Stock: 49650528061810 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TE Connectivity AMP 1-84984-8 is determined by strict alignment of the following critical parameters:

Mandatory Matching Parameters:

• Number of Positions: 18
• Pitch: 0.039" (1.00mm)
• Mounting Type: Through Hole
• Contact Configuration: Vertical - 1 Sided
• Termination Style: Kinked Pin
• FFC/FPC Thickness: 0.30mm
• Contact Material: Phosphor Bronze
• Contact Finish: Tin

Allowable Variation Parameters:

• Voltage Rating: Substitute must meet or exceed application requirements
• Current Rating: Substitute must meet or exceed application requirements
• Operating Temperature Range: Substitute must cover application temperature envelope
• Housing Material: Alternative materials acceptable if mechanical and electrical properties are maintained
• Height Above Board: Minor variations acceptable within PCB layout constraints
• Product Status: Active status preferred for long-term availability

The Molex 0528061810 connector satisfies the mandatory matching parameters while presenting variations in voltage rating, current rating, operating temperature range, and housing material that require engineering evaluation based on specific application requirements.

Parameter Comparison

Engineering Selection Recommendations

TE Connectivity AMP 1-84984-8 (Original Part):

• Product Status: Obsolete
• RoHS Status: Not applicable
• Availability: 1165 pieces in stock
• Selection Rationale: Original specification for existing designs. Obsolete status limits future procurement and long-term supply chain viability.

Molex 0528061810 (Substitute Part):

• Product Status: Active
• RoHS Status: ROHS3 Compliant
• Availability: 4881 pieces in stock
• Selection Rationale: Active product status ensures long-term availability and supply chain continuity. ROHS3 compliance supports regulatory requirements for new designs and manufacturing environments. Mechanical compatibility confirmed through matching position count, pitch, mounting type, contact configuration, and termination style.

Critical Compatibility Considerations:

The Molex 0528061810 presents reduced electrical ratings compared to the TE Connectivity AMP 1-84984-8:

• Voltage Rating: 50V (versus 125V)
• Current Rating: 0.5A (versus 1A)
• Operating Temperature Maximum: 80°C (versus 85°C)

These reductions require verification that application voltage, current, and temperature requirements do not exceed the substitute part specifications. The substitute is suitable only for applications operating within its electrical and thermal envelope.

Housing material differs (PPS versus PBT glass-filled), which may affect mechanical properties and environmental resistance. Height above board variation (5.40mm versus 5.59mm) is minor and typically accommodated within standard PCB layout tolerances.

Frequently Asked Questions (FAQ)

Q: Can the Molex 0528061810 be used as a direct replacement for the TE Connectivity AMP 1-84984-8?

A: The Molex 0528061810 is mechanically compatible as a direct replacement based on matching position count (18), pitch (1.00mm), mounting type (through hole), contact configuration (vertical - 1 sided), and termination style (kinked pin). However, electrical compatibility depends on application requirements. The substitute part has lower voltage (50V versus 125V), current (0.5A versus 1A), and maximum temperature (80°C versus 85°C) ratings. Substitution is valid only when application specifications fall within these reduced ratings.

Q: What are the key parameters that determine substitution compatibility?

A: Substitution compatibility is determined by eight mandatory matching parameters: 18 positions, 1.00mm pitch, through-hole mounting, vertical - 1 sided contact configuration, kinked pin termination, 0.30mm FFC/FPC thickness, phosphor bronze contact material, and tin contact finish. Variations in voltage rating, current rating, operating temperature range, housing material, and height above board are allowable only when application requirements are satisfied by the substitute part specifications.

Q: Does the Molex 0528061810 meet current regulatory requirements?

A: Yes. The Molex 0528061810 is ROHS3 compliant, supporting current regulatory requirements for electronic components in regulated markets. The original TE Connectivity AMP 1-84984-8 has not applicable RoHS status, reflecting its obsolete classification and pre-RoHS design era.

Q: What is the significance of the height above board difference?

A: The height above board varies by 0.19mm (5.59mm for TE Connectivity versus 5.40mm for Molex). This minor difference is typically accommodated within standard PCB layout tolerances and does not affect mechanical compatibility or connector function. PCB design review is recommended to confirm clearance in space-constrained applications.

Q: Why does the substitute part have lower electrical ratings?

A: The Molex 0528061810 is a different connector design from a different manufacturer, resulting in different electrical performance characteristics. The lower voltage (50V), current (0.5A), and temperature (80°C maximum) ratings reflect the design specifications of this particular connector series. Applications must operate within these specifications for safe and reliable operation.

Q: Is the housing material change from PBT to PPS significant?

A: Housing material differs between the original (PBT glass-filled) and substitute (PPS) parts. Both materials are thermoplastic polymers suitable for connector applications. PPS offers different mechanical and environmental properties compared to PBT glass-filled. Material selection should be verified against specific application environmental conditions, including chemical exposure, humidity, and mechanical stress requirements.

Q: What inventory considerations apply to these parts?

A: The TE Connectivity AMP 1-84984-8 has 1165 pieces in stock but is classified as obsolete, indicating no future manufacturing or restocking. The Molex 0528061810 has 4881 pieces in stock and active product status, ensuring ongoing availability and supply chain support for future requirements.

Q: Are there any packaging differences between these connectors?

A: The TE Connectivity AMP 1-84984-8 packaging is not specified. The Molex 0528061810 is packaged in trays. Packaging differences may affect handling, storage, and integration into automated assembly processes. Packaging requirements should be confirmed based on manufacturing and logistics specifications.