PT 2,5/ 2-PVH-5,0 BD:A,B Equivalent & Substitute Parts

Part Overview

The Phoenix Contact PT 2,5/ 2-PVH-5,0 BD:A,B is a 2-position terminal block designed for screw-based wire termination with 5.0mm pitch spacing. This component is classified as obsolete and has been discontinued by the manufacturer. Due to its obsolete status, identifying functionally equivalent substitute parts is essential for system maintenance, repair, and new design implementations where this connector type is required.

Substiute Parts

1834638

Phoenix ContactIn Stock: 7871834638 Datasheet

Current PartRFQ

691385700002

Würth ElektronikIn Stock: 1241691385700002 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the Phoenix Contact PT 2,5/ 2-PVH-5,0 BD:A,B is determined by the following critical parameters:

• Number of Positions: 2 positions (fixed requirement)
• Pitch Spacing: 5.0mm (0.197") center-to-center distance (fixed requirement)
• Termination Style: Screw-based wire termination (fixed requirement)
• Connector Type: Terminal block plug with female sockets (fixed requirement)
• Wire Entry Orientation: 180° free hanging (in-line configuration)
• Electrical Ratings: Current and voltage specifications must meet or exceed original ratings
• Wire Gauge Compatibility: Must accommodate standard wire gauges used in industrial applications
• Compliance: RoHS and REACH compliance status for regulatory alignment

The Würth Elektronik 691385700002 meets all critical substitution criteria through matching pitch, position count, termination method, and connector configuration.

Parameter Comparison

Engineering Selection Recommendations

The Würth Elektronik 691385700002 is the qualified substitute for the obsolete Phoenix Contact PT 2,5/ 2-PVH-5,0 BD:A,B based on the following engineering criteria:

Mechanical Compatibility: Both components share identical pitch spacing (5.0mm), position count (2), and mounting configuration (free hanging, in-line). Physical and electrical interface compatibility is established.

Electrical Performance: The Würth Elektronik substitute provides specified electrical ratings (16A IEC / 250V IEC, 14A UL / 300V UL) that establish a functional baseline for industrial terminal block applications. The original Phoenix Contact part does not provide published electrical specifications in available documentation.

Regulatory Compliance: The substitute maintains RoHS3 compliance, exceeding the RoHS compliance status of the original part. REACH compliance is unaffected, supporting use in regulated markets.

Product Availability: The substitute is classified as active product status with confirmed inventory (1148 pieces), ensuring long-term supply chain viability compared to the obsolete original.

Termination and Wire Compatibility: Both components utilize screw-based termination with compatible wire gauge ranges (12-24 AWG / 0.2-2.5mm²), supporting standard industrial wiring practices.

Frequently Asked Questions (FAQ)

Q: Can the Würth Elektronik 691385700002 directly replace the Phoenix Contact 1834638 in existing assemblies?

A: Yes. Both components share identical pitch spacing (5.0mm), 2-position configuration, 180° wire entry orientation, and screw termination method. Physical and electrical interface compatibility is established for direct substitution in applications where the original part was used.

Q: What are the key parameters that determine substitution eligibility?

A: Substitution is determined by: number of positions (2), pitch spacing (5.0mm), termination style (screw), connector type (terminal block plug with female sockets), and mounting configuration (free hanging, in-line). All parameters must match between original and substitute parts.

Q: Does the substitute part meet current regulatory requirements?

A: Yes. The Würth Elektronik 691385700002 is ROHS3 compliant and REACH unaffected, meeting current regulatory standards for electronic components in industrial applications.

Q: What is the wire gauge compatibility range for the substitute part?

A: The Würth Elektronik 691385700002 accommodates wire gauges from 12-24 AWG or 0.2-2.5mm², supporting standard industrial wiring specifications.

Q: Is the substitute part currently available?

A: Yes. The Würth Elektronik 691385700002 is classified as active product status with confirmed inventory availability (1148 pieces), ensuring reliable supply chain access.

Q: What packaging format is supplied for the substitute part?

A: The Würth Elektronik 691385700002 is supplied in tray packaging, suitable for automated assembly and component handling in production environments.