Phoenix Contact 1829206 Terminal Block Header - Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 1829206 is a 7-position terminal block header with male pins, designed for vertical through-hole mounting at 7.62mm pitch. This component is part of the COMBICON GMSTBV series and is actively manufactured. Terminal block headers of this specification are essential in industrial control systems, power distribution panels, and modular electronic assemblies where reliable electrical connections and mechanical stability are required. Equivalent parts may be necessary due to supply chain considerations, regional availability, or design standardization across manufacturing facilities.

Substiute Parts

1829206

Phoenix ContactIn Stock: 11951829206 Datasheet

Current PartRFQ

796980-7

TE Connectivity AMP ConnectorsIn Stock: 1252796980-7 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The TE Connectivity AMP Connectors part number 796980-7 qualifies as a direct substitute for the Phoenix Contact 1829206 based on the following critical parameters:

• Electrical Compatibility: Both parts maintain identical UL current rating (15 A) and voltage rating (300 V), ensuring equivalent electrical performance in circuit applications.
• Mechanical Compatibility: Both components feature 7 positions at 0.300" (7.62mm) pitch with vertical orientation and through-hole mounting, enabling direct PCB footprint compatibility.
• Connector Type: Both are header-type terminal blocks with male pins and 4-side shrouding, providing identical mating interface characteristics.
• Termination Method: Both use solder termination, maintaining process compatibility in assembly operations.
• Regulatory Compliance: Both parts carry UL94 V-0 flammability rating and RoHS compliance certification, meeting identical safety and environmental standards.

Parameter Comparison

Engineering Selection Recommendations

Both the Phoenix Contact 1829206 and TE Connectivity 796980-7 are active products with current manufacturing status. Selection between these parts should be based on:

• Supply Chain Availability: Both parts maintain active inventory. The TE Connectivity 796980-7 currently has 1207 units in stock, while the Phoenix Contact 1829206 has 1174 units available.
• Regulatory Compliance: Both parts meet identical compliance requirements, including UL94 V-0 flammability rating, RoHS compliance, and EAR99 export classification.
• Mechanical Fit: The contact tail length differs slightly (Phoenix Contact: 0.154" / 3.90mm; TE Connectivity: 0.138" / 4.60mm). This variation must be evaluated against specific PCB design requirements and solder joint depth specifications.
• Housing Material Specification: Phoenix Contact uses Polyamide (PA), while TE Connectivity specifies Polyamide (PA66), Nylon 6/6. Both materials meet UL94 V-0 requirements and are functionally equivalent for this application class.

Frequently Asked Questions (FAQ)

Q: Can the TE Connectivity 796980-7 be used as a direct replacement for the Phoenix Contact 1829206 in existing designs?

A: Yes, the TE Connectivity 796980-7 is electrically and mechanically compatible. Both parts share identical pitch (7.62mm), position count (7), voltage/current ratings (300V/15A UL), and mounting method (vertical through-hole solder). The minor difference in contact tail length (0.154" vs 0.138") must be evaluated against specific PCB hole depth and solder joint requirements.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts carry identical certifications: UL94 V-0 flammability rating, RoHS compliance, MSL 1 (Unlimited), and EAR99 export classification.

Q: What is the significance of the different housing materials (PA vs PA66)?

A: Both Polyamide (PA) and Polyamide (PA66) meet UL94 V-0 flammability requirements and are suitable for this terminal block application. The material difference does not affect electrical performance or safety ratings.

Q: How do the different series designations (COMBICON GMSTBV vs Buchanan) affect substitution?

A: Series designations identify manufacturer product lines but do not affect functional compatibility. The critical parameters for substitution are the electrical ratings, mechanical dimensions, and connector type, which are identical between these parts.

Q: What should be verified before implementing a substitution in production?

A: Confirm that the contact tail length (0.154" for Phoenix Contact vs 0.138" for TE Connectivity) is compatible with your PCB design specifications, including hole depth and solder joint geometry. Verify that both parts are available from your supply chain at the required volumes and lead times.