Phoenix Contact 1827567 Terminal Block Header - Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 1827567 is a 16-position terminal block header with male pins, shrouded on four sides, designed for 0.150" (3.81mm) pitch applications. This component operates at 8A (IEC/UL) and 320V (IEC) / 300V (UL), featuring through-hole solder termination and 45° orientation. The part is active in production and RoHS compliant, making it suitable for industrial control, automation, and power distribution applications where reliable electrical connections are required.

Substitute parts are identified when they maintain identical electrical ratings, mechanical dimensions, and functional specifications across all critical parameters.

Substiute Parts

1827567

Phoenix ContactIn Stock: 7721827567 Datasheet

Current PartRFQ

1827415

Phoenix ContactIn Stock: 10371827415 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The Phoenix Contact 1827415 qualifies as a direct substitute for the 1827567 based on the following critical parameters:

• Identical 16-position configuration with 0.150" (3.81mm) pitch
• Matching header type: Male pins, shrouded (4 side)
• Identical 45° orientation and through-hole solder termination
• Equivalent electrical ratings: 8A (IEC/UL), 320V (IEC), 300V (UL)
• Same housing material: Polyamide (PA), Nylon with UL94 V-0 flammability rating
• Matching contact specifications: Tin mating finish, 0.134" (3.40mm) tail length, 0.433" (11.00mm) insulation height
• Both parts are active production status with RoHS compliance and MSL 1 rating

Substitution is valid when the application requires identical electrical performance, mechanical fit, and environmental compliance across all specified parameters.

Parameter Comparison

Engineering Selection Recommendations

Both the 1827567 and 1827415 are active production components from Phoenix Contact's COMBICON SMC series. The 1827415 carries ROHS3 compliance, representing a more recent regulatory certification compared to the standard RoHS compliance of the 1827567. Both parts meet UL94 V-0 flammability requirements and maintain identical electrical and mechanical specifications.

Selection between these parts should be based on supply chain availability and regulatory requirements specific to the end application. The 1827415 is suitable for applications requiring ROHS3 documentation. Both parts are functionally interchangeable when electrical ratings (8A/320V IEC, 8A/300V UL) and mechanical dimensions are the primary selection criteria.

Frequently Asked Questions (FAQ)

Q: Can the 1827415 be used as a direct replacement for the 1827567 in existing designs?

A: Yes. Both parts share identical electrical ratings (8A/320V IEC, 8A/300V UL), mechanical dimensions (16 positions, 0.150" pitch, 45° orientation), and housing specifications (Polyamide/Nylon, UL94 V-0). Through-hole solder termination and contact specifications are equivalent.

Q: What is the difference between RoHS and ROHS3 compliance?

A: ROHS3 represents the current regulatory standard for RoHS compliance. Both certifications indicate restriction of hazardous substances. The 1827415 carries the more recent ROHS3 designation. Both parts meet the same material restrictions for lead, cadmium, mercury, and other regulated substances.

Q: Are the physical dimensions identical between these parts?

A: Yes. Contact tail length (0.134" / 3.40mm), insulation height (0.433" / 11.00mm), and all pitch-related dimensions are identical. PCB footprints and mating interface dimensions are equivalent.

Q: What does MSL 1 rating mean for these terminal blocks?

A: MSL (Moisture Sensitivity Level) 1 indicates unlimited shelf life with no moisture precautions required. These components do not require special storage conditions or baking procedures prior to assembly.

Q: Can these parts be used interchangeably in high-voltage applications?

A: Both parts are rated for 320V (IEC) and 300V (UL). Application suitability depends on specific circuit voltage requirements and safety standards applicable to the end equipment. Verify that the application voltage does not exceed the rated specifications.