Phoenix Contact 1826322 Terminal Block Plug - Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 1826322 is a 6-position terminal block plug with female sockets, 0.200" (5.08mm) pitch, designed for 225° free-hanging in-line applications. This component is part of the COMBICON SMSTB series and is actively manufactured. Terminal block plugs are essential interconnection components in industrial control systems, power distribution panels, and modular equipment where reliable screw-cage termination and quick-disconnect capability are required. Substitute parts may be necessary due to inventory constraints, lead time requirements, or specific application compatibility needs.

Substiute Parts

1826322

Phoenix ContactIn Stock: 9761826322 Datasheet

Current PartRFQ

796634-6

TE Connectivity AMP ConnectorsIn Stock: 9122796634-6 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Phoenix Contact 1826322 is determined by strict alignment of the following critical parameters:

Mandatory Matching Parameters:

• Number of positions: 6
• Pitch: 0.200" (5.08mm)
• Termination style: Screw - Rising cage clamp
• Mounting type: Free hanging (in-line)
• Screw size: M3
• Material flammability rating: UL94 V-0
• RoHS compliance: ROHS3 Compliant

Acceptable Variation Parameters:

• Plug wire entry angle: 225° (main part) vs. 180° (substitute) — both are valid free-hanging orientations for different installation geometries
• Wire gauge range: 12-30 AWG (0.2-2.5mm²) main vs. 12-30 AWG (0.05-3mm²) substitute — substitute accommodates broader wire sizes
• Torque specification: 0.5-0.6 Nm (main) vs. 0.79 Nm (substitute) — both within acceptable M3 screw fastening range
• Operating temperature: Not specified (main) vs. -40°C ~ 110°C (substitute) — substitute provides defined thermal range
• Contact material: Not specified (main) vs. Phosphor Bronze (substitute) — both acceptable for tin-plated mating finish
• Housing material: Polyamide (PA), Nylon (main) vs. Polyamide (PA66), Nylon 6/6 (substitute) — both meet UL94 V-0 requirement

The TE Connectivity AMP Connectors 796634-6 qualifies as a direct substitute based on matching all mandatory parameters while offering equal or superior electrical and mechanical performance.

Parameter Comparison

Engineering Selection Recommendations

Both the Phoenix Contact 1826322 and TE Connectivity 796634-6 are active products with ROHS3 compliance and UL94 V-0 material certification, meeting current regulatory requirements for industrial terminal block applications.

Selection Criteria:

The Phoenix Contact 1826322 is the primary choice when 225° wire entry orientation is required for specific panel layout or cable routing geometry.

The TE Connectivity 796634-6 serves as a functional equivalent when 180° wire entry orientation is acceptable or preferred. This substitute offers broader wire gauge accommodation (0.05-3mm² vs. 0.2-2.5mm²), making it suitable for applications requiring smaller gauge conductors. The higher torque specification (0.79 Nm) provides increased screw fastening security compared to the main part's 0.5-0.6 Nm range.

Both components maintain identical electrical performance (15 A UL, 300 V UL) and mechanical compatibility (M3 screw, 6-position 5.08mm pitch, free-hanging mounting). Selection between these parts should be based on installation geometry requirements and wire gauge specifications for the target application.

Frequently Asked Questions (FAQ)

Q: Can the TE Connectivity 796634-6 be used as a direct replacement for the Phoenix Contact 1826322?

A: Yes, with consideration for wire entry angle. Both components share identical pitch (5.08mm), position count (6), termination method (screw-cage clamp), and electrical ratings (15 A, 300 V UL). The primary difference is wire entry orientation: 225° (Phoenix Contact) versus 180° (TE Connectivity). Substitution is valid when the 180° orientation accommodates the installation geometry.

Q: What is the significance of the wire entry angle difference?

A: Wire entry angle determines cable approach direction relative to the connector body. The 225° angle (Phoenix Contact) allows cable entry from a specific rotational position, while 180° (TE Connectivity) represents a different approach angle. Selection depends on panel layout and cable routing requirements. Both angles are valid for free-hanging in-line applications.

Q: Are there wire gauge compatibility differences between these parts?

A: The TE Connectivity 796634-6 accommodates a broader wire gauge range (0.05-3mm²) compared to the Phoenix Contact 1826322 (0.2-2.5mm²). Both support 12-30 AWG. The substitute part is suitable for applications requiring smaller gauge conductors below 0.2mm².

Q: Do these components have different screw torque requirements?

A: Yes. The Phoenix Contact 1826322 specifies 0.5-0.6 Nm torque, while the TE Connectivity 796634-6 specifies 0.79 Nm. Both values are within acceptable M3 screw fastening parameters. The higher torque specification of the substitute provides increased clamping force and connection security.

Q: Are both parts RoHS and UL compliant?

A: Yes. Both the Phoenix Contact 1826322 and TE Connectivity 796634-6 are ROHS3 compliant and carry UL94 V-0 material flammability certification, meeting current industrial and regulatory standards.

Q: What is the difference in housing material between these parts?

A: Phoenix Contact uses Polyamide (PA), Nylon, while TE Connectivity uses Polyamide (PA66), Nylon 6/6. Both materials meet UL94 V-0 flammability requirements. PA66 offers slightly enhanced thermal and mechanical properties compared to standard PA.

Q: Can these parts be intermixed in the same installation?

A: Intermixing is not recommended within a single panel or system due to wire entry angle differences (225° vs. 180°). Consistent orientation across all terminal block connections ensures uniform cable routing and installation geometry.