1825CC104MATME Equivalent & Substitute Parts

Part Overview

The 1825CC104MATME is a 0.1 µF ceramic capacitor rated at 630V with X7R temperature coefficient, manufactured by KYOCERA AVX in 1825 (4564 Metric) surface mount package. This component is classified as Active and complies with ROHS3 and REACH standards. Equivalent and substitute parts are identified based on matching capacitance, package form factor, temperature coefficient, and voltage rating compatibility within the allowed electrical and mechanical parameters for high-voltage ceramic capacitor applications.

Substiute Parts

1825CC104MATME

KYOCERA AVXIn Stock: 9781825CC104MATME Datasheet

Current PartRFQ

1825AC104KAT1A

KYOCERA AVXIn Stock: 13481825AC104KAT1A Datasheet

UpgradeRFQ

1825CC104KAT1A

KYOCERA AVXIn Stock: 25561825CC104KAT1A Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 1825CC104MATME are qualified based on the following criteria:

Mandatory Matching Parameters:

• Capacitance: 0.1 µF (exact match required)
• Package / Case: 1825 (4564 Metric) (exact match required)
• Temperature Coefficient: X7R (exact match required)
• Mounting Type: Surface Mount, MLCC (exact match required)
• Operating Temperature Range: -55°C ~ 125°C (exact match required)

Allowable Variation Parameters:

• Tolerance: ±10% or ±20% (tighter tolerance acceptable as upgrade)
• Voltage - Rated: 630V or higher (higher voltage acceptable as upgrade)
• Packaging Format: Cut Tape (CT), Digi-Reel®, or Tape & Reel (TR) (format variation acceptable)

The identified substitute parts maintain identical electrical performance in the 0.1 µF capacitance class while offering either improved tolerance specifications or higher voltage ratings, both of which are backward-compatible with the original design requirements.

Parameter Comparison

Engineering Selection Recommendations

1825AC104KAT1A (Upgrade Option - Higher Voltage Rating)

This substitute provides a 1000V (1kV) rated voltage with ±10% tolerance. The higher voltage rating offers increased design margin for applications subject to voltage transients or overvoltage conditions. The tighter ±10% tolerance improves capacitance accuracy compared to the original ±20% specification. All compliance certifications (ROHS3, REACH) and electrical characteristics remain equivalent. This part is suitable for direct substitution in designs where enhanced voltage headroom is beneficial.

1825CC104KAT1A (Direct Equivalent - Improved Tolerance)

This substitute maintains the 630V voltage rating while upgrading tolerance to ±10%. The improved tolerance specification provides tighter capacitance control without altering voltage performance. All other electrical and mechanical parameters remain identical to the original part. This part is suitable for applications requiring improved capacitance accuracy within the same voltage class. Packaging format differs (Tape & Reel vs. Cut Tape), which may affect procurement and assembly workflows.

Both substitute parts are Active status components with full ROHS3 and REACH compliance, ensuring regulatory and environmental compatibility with the original design.

Frequently Asked Questions (FAQ)

Q: Can 1825AC104KAT1A replace 1825CC104MATME in all applications?

A: Yes. The 1825AC104KAT1A is electrically and mechanically compatible. It provides the same 0.1 µF capacitance in the identical 1825 package with X7R temperature coefficient. The higher 1000V rating is backward-compatible with 630V circuit requirements. The ±10% tolerance is tighter than the original ±20%, which improves performance.

Q: What is the difference between 1825AC104KAT1A and 1825CC104KAT1A?

A: Both parts share identical capacitance (0.1 µF), tolerance (±10%), package (1825), and temperature coefficient (X7R). The primary difference is voltage rating: 1825AC104KAT1A is rated 1000V, while 1825CC104KAT1A is rated 630V. Select 1825AC104KAT1A for higher voltage margin; select 1825CC104KAT1A for voltage-matched equivalence with improved tolerance.

Q: Are packaging format differences between these parts significant?

A: Packaging format (Cut Tape, Digi-Reel®, or Tape & Reel) affects procurement and assembly handling but does not alter electrical or mechanical performance. Verify packaging compatibility with your assembly equipment and supply chain requirements before selection.

Q: Do all substitute parts meet the same compliance standards?

A: Yes. All listed parts are ROHS3 Compliant, REACH Unaffected, and classified as Active products. Moisture Sensitivity Level (MSL) is 1 (Unlimited) for all parts, indicating no moisture-related handling restrictions.

Q: Can these parts be used interchangeably on the same PCB assembly?

A: Yes. All parts share identical footprint dimensions (0.177" L x 0.252" W / 4.50mm x 6.40mm) and thickness (0.100" / 2.54mm). They are mechanically and electrically interchangeable on the same PCB layout without design modification.