1825CC104MATBE Equivalent & Substitute Parts

Part Overview

The 1825CC104MATBE is a 0.1 µF ceramic capacitor rated at 630V with X7R temperature coefficient, manufactured by KYOCERA AVX. This surface mount multilayer ceramic capacitor (MLCC) in 1825 (4564 Metric) package is designed for general purpose high voltage applications. The part is currently active in production with 814 units in stock. Substitute parts are identified to address packaging format requirements, tolerance specifications, or voltage rating upgrades while maintaining core electrical and mechanical compatibility.

Substiute Parts

1825CC104MATBE

KYOCERA AVXIn Stock: 9221825CC104MATBE Datasheet

Current PartRFQ

1825AC104KAT1A

KYOCERA AVXIn Stock: 13481825AC104KAT1A Datasheet

UpgradeRFQ

1825CC104KAT1A

KYOCERA AVXIn Stock: 25561825CC104KAT1A Datasheet

UpgradeRFQ

KGM44CR72J104KV

KYOCERA AVXIn Stock: 1583KGM44CR72J104KV Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 1825CC104MATBE is determined by the following criteria:

Core Electrical Parameters (Must Match):

• Capacitance: 0.1 µF
• Temperature Coefficient: X7R
• Operating Temperature Range: -55°C ~ 125°C
• Mounting Type: Surface Mount, MLCC

Allowable Variations:

• Voltage Rating: Equal or higher than 630V
• Tolerance: ±10% or ±20%
• Package Format: 1825 (4564 Metric) with dimensional compatibility
• Packaging Type: Cut Tape (CT), Digi-Reel®, or Tape & Reel (TR)

Compliance Requirements (Must Match):

• RoHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

The identified substitute parts meet these criteria while offering improvements in tolerance specification or voltage rating capability.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts are active production components with ROHS3 compliance and MSL 1 rating, meeting the same environmental and regulatory requirements as the main part.

1825AC104KAT1A provides a voltage rating upgrade to 1000V (1kV) with improved tolerance specification (±10%). This part is suitable for applications requiring higher voltage margin or tighter capacitance tolerance. Packaging is available in Cut Tape (CT) & Digi-Reel® format.

1825CC104KAT1A maintains the 630V voltage rating with improved tolerance specification (±10%) and is available in Tape & Reel (TR) packaging format. This part is recommended when Tape & Reel format is required for automated assembly processes.

KGM44CR72J104KV is part of the KGM - HV series, maintaining 630V rating with ±10% tolerance and Tape & Reel (TR) packaging. Dimensional specifications show minor variations (0.181" L x 0.248" W vs. 0.177" L x 0.252" W, and 0.087" thickness vs. 0.100" thickness), which remain within 1825 package classification compatibility.

Frequently Asked Questions (FAQ)

Q: Can 1825AC104KAT1A replace 1825CC104MATBE in a 630V circuit?

A: Yes. The 1825AC104KAT1A is rated for 1000V (1kV), which exceeds the 630V requirement. Higher voltage rating provides additional safety margin. All other electrical parameters (capacitance, temperature coefficient, operating temperature range) are identical.

Q: What is the difference between Cut Tape (CT) & Digi-Reel® and Tape & Reel (TR) packaging?

A: Cut Tape format is used for manual or semi-automated assembly, while Tape & Reel format is optimized for fully automated pick-and-place assembly equipment. Both formats contain the same component; packaging selection depends on assembly process requirements.

Q: Does the tolerance difference between ±20% and ±10% affect circuit performance?

A: Tolerance specification defines the allowable capacitance variation from the nominal 0.1 µF value. ±10% tolerance provides tighter control (0.09 µF to 0.11 µF) compared to ±20% (0.08 µF to 0.12 µF). Selection depends on circuit requirements for capacitance accuracy.

Q: Are the dimensional variations in KGM44CR72J104KV significant?

A: The KGM44CR72J104KV shows minor dimensional differences (length 0.181" vs. 0.177", width 0.248" vs. 0.252", thickness 0.087" vs. 0.100") but remains classified as 1825 (4564 Metric) package. These variations are within standard package classification tolerances and do not affect electrical compatibility or PCB footprint compatibility.

Q: Can all substitute parts be used interchangeably in the same circuit?

A: Yes, all substitute parts meet the core electrical requirements (0.1 µF, X7R, -55°C ~ 125°C operating range, 630V or higher rating) and are mechanically compatible with 1825 package footprints. Selection should be based on specific packaging format requirements and tolerance specifications for your assembly process.