Phoenix Contact 1824608 Terminal Block - Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 1824608 is a 10-position wire-to-board terminal block designed for surface mount applications with a 4.6mm pitch. This component is classified as active and in production, serving as a standard interconnection solution in electronic assemblies requiring horizontal board-mounted terminal connectivity. Substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when inventory constraints necessitate qualified alternatives meeting identical electrical and mechanical specifications.

Substiute Parts

1824608

Phoenix ContactIn Stock: 14231824608 Datasheet

Current PartRFQ

2086-1210/700-000/997-607

WAGO CorporationIn Stock: 12452086-1210/700-000/997-607 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Phoenix Contact 1824608 is determined by strict equivalence across the following critical parameters:

• 10 positions per level configuration
• 0.138" (4.60mm) pitch spacing
• Horizontal with board mating orientation
• 10 A current rating
• 300 V voltage rating
• 16-24 AWG wire gauge compatibility
• Surface mount mounting type
• Screwless wire termination method
• Black housing color
• RoHS compliance status
• MSL 1 moisture sensitivity rating

The WAGO Corporation 2086-1210/700-000/997-607 meets all specified electrical and mechanical parameters, enabling direct substitution in applications where the Phoenix Contact 1824608 is designated.

Parameter Comparison

Engineering Selection Recommendations

Both the Phoenix Contact 1824608 and WAGO 2086-1210/700-000/997-607 are active products with current manufacturing status. The Phoenix Contact part carries RoHS compliance certification, while the WAGO substitute meets ROHS3 compliance, representing an enhanced environmental standard. Both components maintain MSL 1 rating, indicating no moisture sensitivity constraints during storage and handling. Selection between these parts may be based on inventory availability, lead time requirements, or established supplier relationships, as electrical and mechanical performance parameters are equivalent.

Frequently Asked Questions (FAQ)

Q: Can the WAGO 2086-1210/700-000/997-607 be used as a direct replacement for the Phoenix Contact 1824608?

A: Yes. Both parts share identical electrical ratings (10 A, 300 V), mechanical configuration (10 positions, 4.60mm pitch, horizontal orientation), wire gauge compatibility (16-24 AWG), and surface mount packaging. Both are active products with RoHS compliance and MSL 1 ratings.

Q: Are there differences in wire termination between these parts?

A: The Phoenix Contact 1824608 uses leg spring and push-in spring termination, while the WAGO substitute employs push button clamp termination. Both are screwless methods and accommodate the same wire gauge range.

Q: What is the significance of ROHS3 compliance on the WAGO part versus RoHS compliance on the Phoenix Contact?

A: ROHS3 represents a more recent revision of the RoHS directive with updated substance restrictions. Both certifications indicate compliance with hazardous substance limitations; ROHS3 reflects current regulatory standards.

Q: Are both parts available in the same packaging format?

A: Yes. Both the Phoenix Contact 1824608 and WAGO 2086-1210/700-000/997-607 are supplied in Tape & Reel (TR) packaging suitable for automated assembly processes.

Q: What determines whether a terminal block can substitute for the Phoenix Contact 1824608?

A: Substitution requires matching specifications across position count, pitch spacing, mating orientation, current and voltage ratings, wire gauge range, mounting type, and compliance certifications. Deviations in any of these parameters disqualify a part from direct substitution.