Phoenix Contact 1823010 Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 1823010 is a 6-position wire-to-board terminal block with 5.00mm pitch, designed for horizontal mounting on PCBs through-hole connections. This component operates at 10A and 300V, accommodating wire gauges from 16-24 AWG with screwless push-in spring termination. The part is currently active in production with ROHS3 compliance and unlimited moisture sensitivity rating. Substitute parts are identified when equivalent electrical ratings, mechanical compatibility, and board-level integration requirements are met across the same functional category.

Substiute Parts

1823010

Phoenix ContactIn Stock: 11671823010 Datasheet

Current PartRFQ

2086-3206

WAGO CorporationIn Stock: 12262086-3206 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The WAGO Corporation 2086-3206 qualifies as a direct substitute based on the following alignment of critical parameters:

• Electrical Compatibility: Both parts maintain 10A current rating and 300V voltage rating
• Mechanical Compatibility: Identical 6-position configuration with 0.197" (5.00mm) pitch spacing
• Board Integration: Both feature horizontal-with-board mating orientation and through-hole mounting
• Wire Acceptance: Both accept 16-24 AWG wire gauges
• Regulatory Compliance: Both achieve ROHS3 compliance and carry unlimited MSL rating
• Termination Method: Both employ screwless push-in spring technology for tool-free wire insertion

The primary distinction lies in housing material composition and operating temperature specification, which do not restrict substitution within standard industrial applications.

Parameter Comparison

Engineering Selection Recommendations

Both the Phoenix Contact 1823010 and WAGO 2086-3206 maintain active product status with full ROHS3 compliance and unlimited moisture sensitivity ratings. Selection between these parts depends on application-specific requirements:

The Phoenix Contact 1823010 utilizes liquid crystal polymer housing with tin-plated contacts and leg spring termination. The WAGO 2086-3206 employs glass-filled polyphthalamide housing with electrolytic copper-tin plated contacts and push-button clamp termination. Both configurations satisfy the core electrical and mechanical requirements for 6-position, 5.00mm pitch wire-to-board connections at 10A and 300V.

The WAGO part specifies an operating temperature range of -60°C to 105°C, whereas the Phoenix Contact part does not provide this specification in the available data. For applications requiring defined thermal performance boundaries, the WAGO specification provides explicit temperature limits.

Frequently Asked Questions (FAQ)

Q: Can the WAGO 2086-3206 directly replace the Phoenix Contact 1823010 on existing PCBs?

A: Yes. Both parts share identical pitch spacing (5.00mm), position count (6), and through-hole mounting footprint. PCB layout compatibility is maintained without modification.

Q: Are the wire termination methods interchangeable?

A: Both employ screwless push-in spring technology, eliminating the need for tools during wire insertion. The Phoenix Contact uses leg spring termination while the WAGO uses push-button clamp actuation. Both methods achieve equivalent electrical connection without requiring screwdriver access.

Q: What is the significance of the different housing materials?

A: The Phoenix Contact 1823010 uses liquid crystal polymer (LCP) while the WAGO 2086-3206 uses glass-filled polyphthalamide (PPA). Both materials provide adequate insulation and mechanical stability for the specified electrical ratings. Material selection may influence thermal dissipation characteristics and mechanical rigidity in specific environmental conditions.

Q: Do both parts meet the same regulatory requirements?

A: Yes. Both parts achieve ROHS3 compliance, carry unlimited MSL ratings, and share identical ECCN (EAR99) and HTSUS (8536.90.4000) classifications.

Q: What packaging differences exist between these parts?

A: The Phoenix Contact 1823010 is supplied in tape and reel (TR) packaging, while the WAGO 2086-3206 is supplied in tray packaging. This distinction affects handling and storage procedures but does not impact electrical or mechanical performance.