Phoenix Contact 1823007 Terminal Block - Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 1823007 is a 5-position wire-to-board terminal block with 5.00mm pitch, designed for horizontal mounting on PCBs through-hole connections. This component is classified as Active product status and is RoHS3 compliant. Alternative equivalent parts may be required due to supply chain considerations, packaging format preferences, or specific application requirements for wire termination methods.

Substiute Parts

1823007

Phoenix ContactIn Stock: 7751823007 Datasheet

Current PartRFQ

2086-3205

WAGO CorporationIn Stock: 7982086-3205 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The WAGO Corporation 2086-3205 qualifies as a direct substitute for the Phoenix Contact 1823007 based on the following critical parameters:

• Electrical Compatibility: Both parts maintain identical current (10 A) and voltage (300 V) ratings
• Mechanical Compatibility: Both feature 5 positions per level with 0.197" (5.00mm) pitch spacing
• Mounting Configuration: Both are through-hole mounted with horizontal board orientation
• Wire Compatibility: Both accept 16-24 AWG wire gauge
• Regulatory Compliance: Both are RoHS3 compliant with MSL 1 rating

The primary difference lies in wire termination method: the Phoenix Contact 1823007 uses screwless leg spring push-in termination, while the WAGO 2086-3205 employs push-button clamp termination. Both methods are functionally equivalent for wire retention and electrical connection in this application category.

Parameter Comparison

Engineering Selection Recommendations

Both the Phoenix Contact 1823007 and WAGO 2086-3205 are Active product status components with full RoHS3 and REACH compliance. Selection between these parts should be based on:

• Wire Termination Preference: The Phoenix Contact uses leg spring push-in termination, while the WAGO uses push-button clamp actuation. Both methods provide equivalent electrical and mechanical performance within the specified parameters.
• Packaging Format: Phoenix Contact is supplied in Tape & Reel format; WAGO is supplied in Tray format. Packaging selection depends on assembly process requirements.
• Operating Temperature Range: The WAGO 2086-3205 specifies -60°C to 105°C operating temperature, whereas the Phoenix Contact 1823007 does not provide this specification in the available data.
• Supply Chain Availability: Both parts maintain active inventory status with comparable stock levels.

Frequently Asked Questions (FAQ)

Q: Can the WAGO 2086-3205 directly replace the Phoenix Contact 1823007 on an existing PCB?

A: Yes. Both parts share identical pitch (5.00mm), position count (5), mounting type (through-hole), and electrical ratings (10 A, 300 V). PCB footprints are compatible. The primary operational difference is the wire termination method.

Q: What is the difference between leg spring push-in and push-button clamp termination?

A: Leg spring push-in (Phoenix Contact) allows direct wire insertion into the terminal opening. Push-button clamp (WAGO) requires actuating a button to open the clamp for wire insertion. Both methods provide equivalent wire retention and electrical connection.

Q: Are there packaging considerations when switching between these parts?

A: Yes. The Phoenix Contact 1823007 is supplied in Tape & Reel format suitable for automated pick-and-place assembly. The WAGO 2086-3205 is supplied in Tray format, which may require manual handling or different feeder compatibility depending on assembly equipment.

Q: Do both parts meet the same regulatory requirements?

A: Yes. Both parts are RoHS3 compliant, REACH unaffected, and classified under ECCN EAR99 with identical HTSUS coding (8536.90.4000).

Q: What wire gauges are compatible with both parts?

A: Both parts accept 16-24 AWG wire gauge, providing equivalent wire compatibility across the full range.