Phoenix Contact 1822804 Terminal Block - Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 1822804 is a 7-position wire-to-board terminal block with side entry, 4.6mm pitch, and through-hole mounting. This component is designed for horizontal board orientation with push-in spring wire termination. The part is currently active in production with 836 units in stock. Alternative models may be required due to packaging availability, inventory constraints, or specific application requirements for different wire termination methods or operating temperature ranges.

Substiute Parts

1822804

Phoenix ContactIn Stock: 8941822804 Datasheet

Current PartRFQ

2086-1207

WAGO CorporationIn Stock: 10522086-1207 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Phoenix Contact 1822804 is determined by strict equivalence across the following critical parameters:

• Electrical Specifications: Current rating (10 A), voltage rating (300 V), and wire gauge compatibility (16-24 AWG) must match exactly
• Physical Configuration: 7 positions per level, 4.6mm pitch, horizontal board orientation, and through-hole mounting must be identical
• Functional Compatibility: Wire termination method must support the same wire gauges and connection reliability
• Regulatory Compliance: RoHS3 compliance and MSL rating must be maintained

The WAGO Corporation 2086-1207 meets all substitution criteria. While it employs a different wire termination method (push-button clamp versus leg spring/push-in spring), both methods accommodate the identical wire gauge range and deliver equivalent electrical performance within the specified current and voltage parameters.

Parameter Comparison

Engineering Selection Recommendations

Both the Phoenix Contact 1822804 and WAGO 2086-1207 are active production components with full RoHS3 compliance and unlimited moisture sensitivity ratings. Selection between these parts should be based on:

• Packaging Requirements: Phoenix Contact 1822804 is supplied in Tape & Reel format; WAGO 2086-1207 is supplied in Tray format. Choose based on assembly line equipment compatibility and inventory management practices.
• Wire Termination Preference: Phoenix Contact uses leg spring and push-in spring termination; WAGO uses push-button clamp termination. Both methods support identical wire gauge ranges and current ratings. Verify operator familiarity with the termination mechanism for your production environment.
• Operating Temperature: WAGO 2086-1207 specifies -60°C to 105°C operating range. Phoenix Contact 1822804 does not specify an operating temperature range in available documentation. If extended temperature operation is required, WAGO 2086-1207 provides explicit temperature ratings.
• Inventory Availability: Phoenix Contact 1822804 has 836 units in stock; WAGO 2086-1207 has 993 units in stock.

Frequently Asked Questions (FAQ)

Q: Can the WAGO 2086-1207 be used as a direct replacement for the Phoenix Contact 1822804?

A: Yes. Both parts share identical electrical ratings (10 A, 300 V), wire gauge compatibility (16-24 AWG), physical configuration (7 positions, 4.6mm pitch, horizontal orientation), and through-hole mounting. The difference in wire termination method (push-button clamp versus leg spring/push-in spring) does not affect electrical performance or compatibility within the specified parameters.

Q: What is the primary difference between these two parts?

A: The main differences are packaging format (Tape & Reel versus Tray), wire termination mechanism (push-button clamp versus leg spring/push-in spring), housing material (Polyphthalamide glass-filled versus Liquid Crystal Polymer), and specified operating temperature range (WAGO provides -60°C to 105°C; Phoenix Contact does not specify). Electrical and mechanical compatibility remain equivalent.

Q: Are there any compatibility issues with PCB layout or footprint?

A: Both parts maintain identical pitch (4.6mm), position count (7), and through-hole mounting configuration. PCB footprints are compatible. Verify that your assembly process accommodates the specific wire termination method of your selected part.

Q: Do both parts meet the same regulatory standards?

A: Yes. Both the Phoenix Contact 1822804 and WAGO 2086-1207 are ROHS3 compliant, REACH unaffected, and carry MSL rating 1 (unlimited). Both are classified under ECCN EAR99 and HTSUS 8536.90.4000.

Q: Which part should I select if operating temperature is a concern?

A: The WAGO 2086-1207 explicitly specifies an operating temperature range of -60°C to 105°C. If your application requires operation outside standard room temperature conditions, WAGO 2086-1207 provides documented temperature performance. The Phoenix Contact 1822804 does not provide an operating temperature specification in available data.