Phoenix Contact 1822752 Terminal Block - Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 1822752 is a 2-position wire-to-board terminal block with side entry and 4.6mm pitch, designed for through-hole PCB mounting. This component is classified as Active product status and is RoHS3 compliant. Alternative equivalent parts may be required due to inventory constraints, packaging preferences, or specific application requirements such as operating temperature range or wire termination method variations.

Substiute Parts

1822752

Phoenix ContactIn Stock: 11491822752 Datasheet

Current PartRFQ

2086-1202

WAGO CorporationIn Stock: 16862086-1202 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Phoenix Contact 1822752 is determined by strict equivalence across the following critical parameters:

• Electrical Specifications: Current rating (10 A), voltage rating (300 V), and wire gauge compatibility (16-24 AWG) must match exactly
• Mechanical Compatibility: Pitch (4.60mm), mating orientation (horizontal with board), and mounting type (through hole) must be identical
• PCB Integration: Number of positions (2) and levels (1) must correspond
• Regulatory Compliance: RoHS3 compliance status must be maintained

The WAGO Corporation 2086-1202 meets all substitution criteria within these parameters. Differences in wire termination method (screwless push-in spring versus push button clamp), housing material composition, and operating temperature range do not disqualify substitution when electrical and mechanical requirements are satisfied.

Parameter Comparison

Engineering Selection Recommendations

Both the Phoenix Contact 1822752 and WAGO 2086-1202 are Active product status components with full RoHS3 compliance and REACH unaffected status. Selection between these parts should be based on:

• Packaging Format: Phoenix Contact 1822752 is supplied in bulk packaging; WAGO 2086-1202 is supplied in tray packaging
• Wire Termination Preference: Phoenix Contact uses leg spring and push-in spring termination; WAGO uses push button clamp actuation
• Operating Temperature: WAGO 2086-1202 specifies -60°C to 105°C operating range; Phoenix Contact 1822752 does not specify this parameter
• Inventory Availability: Phoenix Contact 1822752 has 1107 pcs in stock; WAGO 2086-1202 has 1662 pcs in stock

Both parts satisfy identical electrical and mechanical requirements for PCB-mounted applications requiring 10 A at 300 V with 16-24 AWG wire compatibility.

Frequently Asked Questions (FAQ)

Q: Can the WAGO 2086-1202 be used as a direct replacement for the Phoenix Contact 1822752?

A: Yes. Both parts meet identical electrical specifications (10 A, 300 V), mechanical pitch (4.60mm), wire gauge compatibility (16-24 AWG), and mounting requirements (through-hole, horizontal orientation). Both are RoHS3 compliant and REACH unaffected.

Q: What is the difference in wire termination between these parts?

A: The Phoenix Contact 1822752 uses screwless leg spring and push-in spring termination. The WAGO 2086-1202 uses push button clamp termination. Both are screwless methods; the operational interface differs.

Q: Does packaging format affect electrical or mechanical compatibility?

A: No. Bulk packaging (Phoenix Contact) and tray packaging (WAGO) do not affect component performance or PCB integration. Packaging selection is based on assembly process requirements and inventory management.

Q: Are there operating temperature considerations for substitution?

A: The WAGO 2086-1202 specifies -60°C to 105°C operating range. The Phoenix Contact 1822752 does not provide this specification in available data. If application temperature requirements fall within the WAGO specified range, both parts are suitable. If application requires temperatures outside this range, verify Phoenix Contact 1822752 specifications with the manufacturer.

Q: Do both parts comply with the same regulatory standards?

A: Yes. Both parts are RoHS3 compliant, REACH unaffected, classified under ECCN EAR99, and share the same HTSUS code (8536.90.4000). Both have MSL rating of 1 (unlimited moisture sensitivity).