Phoenix Contact 1822367 Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 1822367 is a 7-position wire-to-board terminal block designed for vertical PCB mounting with 0.138" (4.60mm) pitch spacing. This component belongs to the COMBICON SPT-THR series and is classified as active inventory with 982 units in stock. The terminal block accommodates wire gauges from 16-24 AWG and operates at 10 A and 300 V, utilizing screwless leg spring and push-in spring termination technology. Equivalent parts are identified to provide alternative sourcing options when the primary part becomes unavailable or when procurement requirements necessitate component substitution while maintaining electrical and mechanical compatibility.

Key Parameters

Parameter	Value
Positions Per Level	7
Pitch	0.138" (4.60mm)
Mating Orientation	Vertical with Board
Current Rating	10 A
Voltage Rating	300 V
Wire Gauge	16-24 AWG
Mounting Type	Through Hole
Wire Termination	Screwless - Leg Spring, Push-In Spring
Housing Material	Liquid Crystal Polymer (LCP)
Contact Plating	Tin Plated
Color	Black
RoHS Status	RoHS Compliant
MSL Rating	1 (Unlimited)

Substitute Part Grouping Explanation

The WAGO Corporation 2086-1107 qualifies as a direct substitute based on the following critical parameters:

Electrical Compatibility: Both parts maintain identical current (10 A) and voltage (300 V) ratings, ensuring equivalent electrical performance in circuit applications.
Mechanical Compatibility: Both components feature 7 positions per level with 0.138" (4.60mm) pitch spacing and vertical-with-board mating orientation, enabling direct PCB footprint compatibility.
Wire Gauge Compatibility: Both parts accept 16-24 AWG wire, maintaining consistent conductor sizing requirements.
Mounting Compatibility: Both utilize through-hole mounting technology, preserving assembly process compatibility.
Environmental Compliance: Both parts are RoHS compliant and carry MSL rating 1 (Unlimited), meeting regulatory and moisture sensitivity requirements.

Differences in housing material (LCP versus glass-filled PPA), termination mechanism (leg spring/push-in spring versus push-button clamp), and operating temperature specification do not preclude substitution when electrical and mechanical parameters align.

Parameter Comparison

Parameter	Phoenix Contact 1822367	WAGO 2086-1107
Manufacturer	Phoenix Contact	WAGO Corporation
Category	Terminal Blocks	Terminal Blocks
Positions Per Level	7	7
Pitch	0.138" (4.60mm)	0.138" (4.60mm)
Mating Orientation	Vertical with Board	Vertical with Board
Current Rating	10 A	10 A
Voltage Rating	300 V	300 V
Wire Gauge	16-24 AWG	16-24 AWG
Mounting Type	Through Hole	Through Hole
Housing Material	Liquid Crystal Polymer (LCP)	Polyphthalamide (PPA), Glass Filled
Wire Termination	Screwless - Leg Spring, Push-In Spring	Screwless - Push Button Clamp
Contact Plating	Tin Plated	Electrolytic Copper - Tin Plated
Color	Black	Black
RoHS Status	RoHS Compliant	ROHS3 Compliant
MSL Rating	1 (Unlimited)	1 (Unlimited)
Product Status	Active	Active

Engineering Selection Recommendations

Both the Phoenix Contact 1822367 and WAGO 2086-1107 maintain active product status, confirming ongoing manufacturer support and availability. The WAGO 2086-1107 carries ROHS3 compliance, representing an enhanced regulatory certification compared to the standard RoHS compliance of the Phoenix Contact part. Both components satisfy MSL rating 1 requirements, indicating no moisture sensitivity constraints during storage or handling.

Selection between these parts should be based on procurement availability, lead time requirements, and packaging format preferences (Tape & Reel versus Tray). The termination mechanism difference (leg spring/push-in spring versus push-button clamp) represents a functional distinction that does not affect electrical or mechanical compatibility but may influence operator preference during assembly operations.

Frequently Asked Questions (FAQ)

Q: Can the WAGO 2086-1107 be used as a direct replacement for the Phoenix Contact 1822367 on existing PCBs?

A: Yes. Both components share identical pitch spacing (0.138" / 4.60mm), position count (7), and through-hole mounting configuration, ensuring PCB footprint compatibility without layout modifications.

Q: Are the electrical ratings equivalent between these two parts?

A: Yes. Both parts are rated for 10 A current and 300 V voltage, providing identical electrical performance in circuit applications.

Q: What is the difference in wire termination between these parts?

A: The Phoenix Contact 1822367 uses leg spring and push-in spring termination, while the WAGO 2086-1107 uses push-button clamp termination. Both are screwless termination methods; the difference lies in the actuation mechanism.

Q: Do both parts accept the same wire gauge range?

A: Yes. Both components accommodate 16-24 AWG wire, maintaining consistent conductor sizing requirements.

Q: What packaging formats are available for these parts?

A: The Phoenix Contact 1822367 is supplied in Tape & Reel (TR) format, while the WAGO 2086-1107 is supplied in Tray format. Selection depends on assembly line requirements and inventory management preferences.

Q: Are there any compliance differences between these parts?

A: The WAGO 2086-1107 carries ROHS3 compliance, while the Phoenix Contact 1822367 carries standard RoHS compliance. Both meet MSL rating 1 requirements. The WAGO part also includes REACH Unaffected status.

Q: Can these parts be intermixed in the same assembly?

A: Yes. Identical electrical and mechanical parameters permit intermixing on the same PCB without functional impact, though termination mechanism differences may require operator training adjustments.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message