1808CC153MATME Ceramic Capacitor - Equivalent & Substitute Parts

Part Overview

The 1808CC153MATME is a high-voltage ceramic capacitor manufactured by KYOCERA AVX, rated at 0.015 µF capacitance with 630V voltage rating and X7R temperature coefficient. This surface-mount multilayer ceramic capacitor (MLCC) is designed for general-purpose applications requiring stable performance across the -55°C to 125°C operating temperature range. The part is currently in active production status with ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Alternative models may be required when design specifications call for higher voltage ratings, improved tolerance specifications, or alternative packaging configurations while maintaining the same physical footprint and capacitance value.

Substiute Parts

1808CC153MATME

KYOCERA AVXIn Stock: 9551808CC153MATME Datasheet

Current PartRFQ

1808AC153KAT1A

KYOCERA AVXIn Stock: 31331808AC153KAT1A Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

The 1808AC153KAT1A qualifies as a direct substitute for the 1808CC153MATME based on the following substitution criteria:

Matching Parameters (Substitution Basis):

• Identical capacitance value: 0.015 µF
• Identical temperature coefficient: X7R
• Identical package / case: 1808 (4520 Metric)
• Identical physical dimensions: 4.60mm L × 2.00mm W × 2.20mm Max Thickness
• Identical mounting type: Surface Mount, MLCC
• Identical operating temperature range: -55°C to 125°C
• Identical RoHS and REACH compliance status
• Identical moisture sensitivity level: MSL 1 (Unlimited)

Upgrade Characteristics:

• Higher voltage rating: 1000V (1kV) versus 630V
• Improved tolerance: ±10% versus ±20%
• Alternative packaging: Tape & Reel (TR) versus standard packaging

The 1808AC153KAT1A provides enhanced electrical performance through increased voltage margin and tighter capacitance tolerance while maintaining full mechanical and thermal compatibility.

Parameter Comparison

Engineering Selection Recommendations

Both the 1808CC153MATME and 1808AC153KAT1A are active production parts from KYOCERA AVX with full ROHS3 compliance and REACH unaffected status. The 1808AC153KAT1A represents an upgrade path offering superior electrical specifications: the 1000V rating provides 370V additional voltage margin over the 630V specification, and the ±10% tolerance provides tighter capacitance control compared to the ±20% tolerance of the main part. Both parts maintain identical thermal performance across the -55°C to 125°C operating range and are fully compatible with existing PCB layouts due to matching 1808 package dimensions. Selection between these parts depends on circuit voltage requirements and tolerance specifications; the substitute part is suitable for applications requiring enhanced voltage headroom or improved capacitance accuracy.

Frequently Asked Questions (FAQ)

Q: Can the 1808AC153KAT1A directly replace the 1808CC153MATME on existing PCBs?

A: Yes. Both parts use the identical 1808 (4520 Metric) package with matching physical dimensions (4.60mm L × 2.00mm W × 2.20mm Max Thickness). No PCB layout modifications are required.

Q: What is the primary difference between these two parts?

A: The 1808AC153KAT1A provides higher voltage rating (1000V versus 630V) and tighter tolerance (±10% versus ±20%). Capacitance value and temperature coefficient remain identical at 0.015 µF and X7R respectively.

Q: Are there thermal performance differences between these parts?

A: No. Both parts operate across the identical temperature range of -55°C to 125°C with X7R temperature coefficient, ensuring equivalent thermal stability.

Q: What packaging difference exists between these parts?

A: The 1808CC153MATME uses standard packaging, while the 1808AC153KAT1A is supplied in Tape & Reel (TR) format. This affects handling and automated assembly processes but does not impact electrical or mechanical performance.

Q: Do both parts meet the same compliance standards?

A: Yes. Both parts are ROHS3 compliant, REACH unaffected, and carry MSL 1 (Unlimited) moisture sensitivity rating, ensuring equivalent environmental and regulatory compliance.

Q: When should the substitute part be selected over the main part?

A: Select the 1808AC153KAT1A when circuit design requires voltage ratings above 630V, when tighter capacitance tolerance is specified, or when Tape & Reel packaging is required for automated assembly processes.