17EHD044SAM030 Equivalent & Substitute Parts

Part Overview

The 17EHD044SAM030 is a 44-position D-Sub high-density receptacle connector manufactured by Amphenol ICC (Commercial Products). This female socket connector features vertical solder termination and is designed for through-hole mounting applications. The connector is currently in active product status with 726 units in stock. Alternative equivalent and substitute parts are necessary to support design flexibility, supply chain continuity, and application-specific requirements where connector type, mounting orientation, or electrical specifications differ from the primary component.

Substiute Parts

17EHD044SAM030

Amphenol ICC (Commercial Products)In Stock: 79417EHD044SAM030 Datasheet

Current PartRFQ

09563517512

HARTINGIn Stock: 97509563517512 Datasheet

SimilarRFQ

09563625813

HARTINGIn Stock: 115609563625813 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution logic for the 17EHD044SAM030 is based on the following critical parameters that must align for functional equivalence:

Primary Matching Criteria:

• Connector style: D-Sub, High Density
• Number of positions: 44
• Number of rows: 3
• Shell size and connector layout: 3 (DB, B) High Density
• Termination method: Solder
• Contact type: Signal
• Shell material and finish: Steel, Nickel Plated
• Contact material: Copper Alloy
• Flammability rating: UL94 V-0
• Moisture sensitivity level: 1 (Unlimited)

Acceptable Variation Parameters:

• Connector type (Receptacle vs. Plug) determines mating interface
• Mounting orientation (Vertical vs. Right Angle) affects board layout
• Current rating variations (2A vs. 3A) reflect different contact designs
• Operating temperature ranges may differ based on dielectric material selection
• Contact finish specifications and flange features vary by manufacturer design

The substitute parts listed maintain the core 44-position, high-density D-Sub architecture while accommodating different connector types and mounting configurations required for specific circuit board applications.

Parameter Comparison

Engineering Selection Recommendations

17EHD044SAM030 (Amphenol ICC) - Primary Component

This connector is recommended for applications requiring the full operating temperature range of -55°C to 105°C and a current rating of 3A per contact. The polyamide dielectric material and gold contact finish provide robust performance in demanding environments. RoHS compliance and UL94 V-0 flammability rating support use in regulated industries. This part is actively manufactured and maintains 726 units in stock inventory.

09563517512 (HARTING) - Receptacle Equivalent

This substitute maintains the receptacle, female socket configuration and is suitable for applications where the operating temperature range can be limited to -40°C to 85°C and current requirements do not exceed 2A per contact. The PBT dielectric material and ROHS3 compliance align with modern manufacturing standards. The board-side 4-40 flange feature and board lock functionality provide enhanced mechanical stability. This part is actively manufactured with 935 units in stock.

09563625813 (HARTING) - Plug Configuration

This substitute provides a complementary plug connector with male pins for mating with receptacle connectors. The right-angle mounting orientation accommodates applications where vertical space is constrained. The mating-side female screwlock flange and grounding indents support secure cable connections. Operating temperature and current ratings match the 09563517512 receptacle. This part is actively manufactured with 1136 units in stock.

All substitute parts maintain active product status, UL94 V-0 flammability compliance, and MSL 1 moisture sensitivity rating. Selection between substitutes depends on specific connector type requirements (receptacle vs. plug), mounting orientation (vertical vs. right angle), and thermal/electrical operating parameters of the target application.

Frequently Asked Questions (FAQ)

Q: Can 09563517512 directly replace 17EHD044SAM030 in all applications?

A: The 09563517512 is functionally equivalent for receptacle applications but operates within a reduced temperature range (-40°C to 85°C versus -55°C to 105°C) and supports a lower current rating (2A versus 3A). Substitution is valid only when application requirements fall within these reduced specifications. Both connectors maintain the 44-position, high-density D-Sub configuration with identical shell size and solder termination.

Q: What is the primary difference between 09563517512 and 09563625813?

A: The 09563517512 is a receptacle connector with female sockets, while 09563625813 is a plug connector with male pins. These connectors are designed to mate with each other. The 09563625813 also features right-angle mounting, whereas the 09563517512 is vertically mounted. Selection depends on whether the application requires a receptacle or plug interface and the available board space for connector orientation.

Q: Are all three connectors compatible with the same mating interfaces?

A: The 17EHD044SAM030 and 09563517512 are both receptacles and accept male pin plugs. The 09563625813 is a plug connector that mates with receptacles. The 17EHD044SAM030 receptacle and 09563625813 plug are mechanically and electrically compatible for mating, as are the 09563517512 receptacle and 09563625813 plug, provided the electrical specifications of the application fall within the rated parameters.

Q: What compliance certifications apply to all three parts?

A: All three connectors carry UL94 V-0 flammability ratings and MSL 1 moisture sensitivity levels. The 17EHD044SAM030 is RoHS Compliant. The 09563517512 and 09563625813 are ROHS3 Compliant and REACH Unaffected. All parts are classified under ECCN EAR99 and HTSUS 8536.69.4040.

Q: How do the dielectric materials differ between the main part and substitutes?

A: The 17EHD044SAM030 uses polyamide (PA) nylon with glass filling, while both HARTING substitutes use polybutylene terephthalate (PBT) polyester with glass filling. Both materials are glass-filled thermoplastics with UL94 V-0 ratings. The material selection influences the operating temperature range and mechanical properties of the connector housing.

Q: What inventory levels are available for each part?

A: The 17EHD044SAM030 has 726 units in stock. The 09563517512 has 935 units in stock. The 09563625813 has 1136 units in stock. All parts are listed as new original inventory.

Q: Are there differences in contact finish specifications?

A: The 17EHD044SAM030 specifies gold contact finish at 30.0µin (0.76µm) thickness. The 09563517512 does not specify contact finish details. The 09563625813 specifies gold or gold-palladium contact finish at 30.0µin (0.76µm) thickness. Contact finish affects corrosion resistance and signal integrity in high-frequency applications.