Amphenol ICC 17EHD015PAA030 D-Sub High Density Connector Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 17EHD015PAA030 is a 15-position D-Sub high-density plug connector with male pins, designed for through-hole solder termination applications. This connector features a steel nickel-plated shell with gold-flashed copper alloy contacts, rated for 3A per contact at 125V, and operates across the temperature range of -55°C to 105°C. The part is RoHS compliant and carries an active product status. Equivalent and substitute parts are identified to provide design flexibility, accommodate supply chain variations, and support applications requiring alternative mechanical or electrical specifications within the D-Sub high-density connector category.

Substiute Parts

17EHD015PAA030

Amphenol ICC (Commercial Products)In Stock: 93017EHD015PAA030 Datasheet

Current PartRFQ

09561617712

HARTINGIn Stock: 124109561617712 Datasheet

SimilarRFQ

10090928-P154VLF

Amphenol ICC (FCI)In Stock: 683710090928-P154VLF Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 17EHD015PAA030 is determined by strict alignment with core electrical and mechanical parameters. All substitute parts must maintain the following critical specifications:

Core Substitution Criteria:

• Connector style: D-Sub, High Density
• Connector type: Plug, Male Pins
• Number of positions: 15
• Number of rows: 3
• Shell size and layout: 1 (DE, E) High Density
• Mounting type: Through Hole
• Termination method: Solder
• Shell material and finish: Steel, Nickel Plated
• Contact material: Copper Alloy
• Material flammability rating: UL94 V-0
• Moisture sensitivity level: 1 (Unlimited)

Substitute parts identified in this reference maintain these core parameters. Variations in current rating, voltage rating, operating temperature range, contact finish specifications, flange features, and dielectric materials are documented in the parameter comparison table. These variations do not preclude substitution but must be evaluated against specific application requirements.

Parameter Comparison

Engineering Selection Recommendations

All three connectors maintain active product status and comply with RoHS requirements, ensuring long-term availability and regulatory compliance for new designs.

17EHD015PAA030 (Amphenol ICC Commercial Products): This connector provides the highest current rating at 3A per contact and operates across the extended temperature range of -55°C to 105°C. The unthreaded housing/shell flange feature accommodates applications requiring simple through-hole mounting without board-side fastening. Gold-flashed contact finish supports corrosion resistance in demanding environments. Voltage rating of 125V is suitable for standard industrial and commercial applications.

09561617712 (HARTING): This connector features board lock and grounding indent features, providing enhanced mechanical retention on the PCB. The current rating of 2A per contact and operating temperature range of -40°C to 85°C are suitable for applications within these electrical and thermal specifications. The board-side 4-40 flange feature enables direct PCB mounting with mechanical fastening. Contact finish specifications are not provided; verification against application corrosion requirements is necessary. Voltage rating is not specified.

10090928-P154VLF (Amphenol ICC FCI): This connector combines board lock and grounding indent features with dual flange configurations (board side and mating side female screwlock). The current rating of 2.5A per contact and extended operating temperature range of -55°C to 105°C match the primary part specifications. The voltage rating of 250V exceeds the primary part, providing margin for higher-voltage applications. Gold-flashed contact finish matches the primary part. The dual flange design supports both PCB mounting and mating-side connector retention.

Frequently Asked Questions (FAQ)

Q: Can the 09561617712 (HARTING) substitute for the 17EHD015PAA030 in all applications?

A: The 09561617712 maintains core D-Sub high-density plug specifications but differs in current rating (2A versus 3A), operating temperature range (-40°C to 85°C versus -55°C to 105°C), and flange feature (board-side 4-40 versus unthreaded housing/shell). Substitution is valid only for applications operating within the HARTING connector's electrical and thermal specifications and requiring board-side fastening.

Q: What is the primary difference between the 10090928-P154VLF and the 17EHD015PAA030?

A: Both connectors share the same core D-Sub high-density plug configuration, operating temperature range, and contact finish specifications. The 10090928-P154VLF provides a higher voltage rating (250V versus 125V), slightly lower current rating (2.5A versus 3A per contact), and dual flange features (board side and mating side screwlock) compared to the unthreaded housing/shell of the 17EHD015PAA030. The dual flange design enables enhanced mechanical retention at both connection points.

Q: Are all three connectors RoHS compliant?

A: Yes. The 17EHD015PAA030 and 10090928-P154VLF are RoHS Compliant. The 09561617712 is ROHS3 Compliant. All three connectors meet RoHS requirements and are suitable for applications subject to RoHS regulations.

Q: What is the significance of the board lock feature in the HARTING and Amphenol ICC FCI connectors?

A: The board lock feature provides mechanical retention of the connector to the PCB through the 4-40 flange fastening points. This feature prevents accidental connector displacement during assembly, testing, or field service. The 17EHD015PAA030 uses an unthreaded housing/shell flange, which does not include board lock capability and relies on solder joint retention alone.

Q: Can the 09561617712 operate at -55°C?

A: No. The 09561617712 operating temperature range is -40°C to 85°C. Applications requiring operation at -55°C must use the 17EHD015PAA030 or 10090928-P154VLF, both rated for -55°C to 105°C.

Q: What dielectric materials are used in each connector?

A: The 17EHD015PAA030 uses Polyamide (PA), Nylon, Glass Filled dielectric. The 09561617712 uses Polybutylene Terephthalate (PBT), Polyester, Glass Filled dielectric. The 10090928-P154VLF uses Thermoplastic, Glass Filled dielectric. All three materials are glass-filled and rated UL94 V-0 for flammability.

Q: Is contact finish specified for the HARTING connector?

A: Contact finish and contact finish thickness are not specified for the 09561617712. Applications requiring specific contact finish properties (such as gold plating for corrosion resistance) should use the 17EHD015PAA030 or 10090928-P154VLF, both featuring gold flash contact finish.

Q: What is the voltage rating difference between the connectors?

A: The 17EHD015PAA030 is rated for 125V. The 10090928-P154VLF is rated for 250V. The 09561617712 voltage rating is not specified. Applications operating above 125V require the 10090928-P154VLF.

Q: Are all connectors packaged in trays?

A: Yes. All three connectors are supplied in tray packaging, suitable for automated assembly and component handling.