17EBH015PAM210 D-Sub High Density Connector Equivalent & Substitute Parts

Part Overview

The 17EBH015PAM210 is a 15-position D-Sub high-density plug connector manufactured by Amphenol ICC (Commercial Products). This through-hole, right-angle solder connector features male pins with a mating-side female screwlock and is designed for signal applications in industrial and commercial equipment. The connector is Active in product status and RoHS Compliant. Substitute parts are identified to address inventory availability, packaging preferences, or specific application requirements while maintaining electrical and mechanical compatibility within the D-Sub high-density connector category.

Substiute Parts

17EBH015PAM210

Amphenol ICC (Commercial Products)In Stock: 98617EBH015PAM210 Datasheet

Current PartRFQ

09561625813

HARTINGIn Stock: 81109561625813 Datasheet

SimilarRFQ

09561627813

HARTINGIn Stock: 116909561627813 Datasheet

SimilarRFQ

10090926-P154VLF

Amphenol ICC (FCI)In Stock: 397010090926-P154VLF Datasheet

SimilarRFQ

10090926-P154XLF

Amphenol ICC (FCI)In Stock: 519310090926-P154XLF Datasheet

SimilarRFQ

10090926-P156VLF

Amphenol ICC (FCI)In Stock: 247210090926-P156VLF Datasheet

SimilarRFQ

10090926-P156XLF

Amphenol ICC (FCI)In Stock: 148710090926-P156XLF Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution logic for the 17EBH015PAM210 is based on the following critical parameters that must remain constant across all equivalent parts:

Mandatory Matching Parameters:

• Connector Style: D-Sub, High Density
• Number of Positions: 15
• Number of Rows: 3
• Shell Size, Connector Layout: 1 (DE, E) High Density
• Connector Type: Plug, Male Pins
• Termination: Solder
• Shell Material, Finish: Steel, Nickel Plated
• Contact Material: Copper Alloy
• Backset Spacing: 0.350" (8.89mm)
• Material Flammability Rating: UL94 V-0
• Contact Type: Signal
• Mounting Type: Through Hole, Right Angle

Allowable Variations:

• Current Rating: 2.0A to 3.0A per contact
• Voltage Rating: 125V to 250V
• Operating Temperature Range: -55°C to -40°C minimum; 85°C to 105°C maximum
• Contact Finish: Gold or Gold-Palladium
• Contact Finish Thickness: Flash or 30.0µin (0.76µm)
• Dielectric Material: Polyamide (PA) Nylon or Polybutylene Terephthalate (PBT) Polyester, both glass-filled
• Flange Feature: Mating Side Female Screwlock or Board Side (4-40)
• Packaging: Tray or Bulk
• Manufacturer: Amphenol ICC or HARTING

All identified substitute parts maintain the core electrical and mechanical interface specifications required for direct substitution in D-Sub high-density connector applications.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitutes (Highest Compatibility):

The 10090926-P156VLF and 10090926-P156XLF connectors from Amphenol ICC (FCI) series provide the closest electrical and mechanical alignment with the 17EBH015PAM210. Both parts maintain the identical operating temperature range (-55°C to 105°C), higher voltage rating (250V), and equivalent current capacity (2.5A per contact). These parts are RoHS Compliant with MSL 1 rating and feature the same shell material and contact specifications. The primary distinction between these two is the flange feature: P156VLF includes mating-side female screwlock, while P156XLF features board-side mounting. Selection between these depends on application-specific mounting requirements.

Secondary Substitutes (Acceptable with Application Review):

The 10090926-P154VLF and 10090926-P154XLF connectors offer equivalent electrical performance with the same voltage and temperature specifications as the P156 variants. These parts differ only in flange configuration (mating-side female screwlock versus board-side) and are suitable for applications where mounting flexibility is required.

Alternative Substitutes (Limited Scope):

The HARTING parts 09561625813 and 09561627813 are functionally compatible but operate within a reduced temperature range (-40°C to 85°C) and lower current rating (2A). These parts are ROHS3 Compliant and suitable for applications not requiring the full -55°C to 105°C operating envelope. The 09561627813 is available in tray packaging matching the original part, while 09561625813 is supplied in bulk packaging.

Compliance Status:

All substitute parts maintain UL94 V-0 flammability rating and MSL 1 moisture sensitivity level. The Amphenol ICC (FCI) series parts are RoHS Compliant; HARTING parts are ROHS3 Compliant. All parts carry EAR99 ECCN classification and 8536.69.4040 HTSUS code.

Frequently Asked Questions (FAQ)

Q: Can the 09561625813 or 09561627813 HARTING connectors be used as direct replacements for the 17EBH015PAM210?

A: These HARTING parts are mechanically and electrically compatible for applications operating within -40°C to 85°C temperature range and requiring maximum 2A current per contact. Applications requiring the full -55°C to 105°C operating range or 3A current rating must use the Amphenol ICC (FCI) 10090926 series substitutes.

Q: What is the difference between the 10090926-P154VLF and 10090926-P156VLF connectors?

A: Both parts are electrically and mechanically identical with identical operating specifications. The primary difference is contact finish thickness: P154VLF features flash gold plating, while P156VLF features 30.0µin (0.76µm) gold plating, matching the original 17EBH015PAM210 specification.

Q: Are the board-side flange variants (10090926-P154XLF and 10090926-P156XLF) compatible with applications designed for mating-side female screwlock?

A: The board-side flange variants feature different mounting geometry. Compatibility depends on the specific application's mounting interface. Applications designed for mating-side female screwlock require parts with that flange configuration (P154VLF, P156VLF, or the original 17EBH015PAM210).

Q: What packaging options are available for these substitute parts?

A: The 17EBH015PAM210 is supplied in tray packaging. Substitute parts are available in tray packaging (09561627813, 10090926-P154VLF, 10090926-P154XLF, 10090926-P156VLF, 10090926-P156XLF) or bulk packaging (09561625813). Packaging selection does not affect electrical or mechanical compatibility.

Q: Do all substitute parts meet RoHS compliance requirements?

A: The Amphenol ICC (FCI) 10090926 series parts are RoHS Compliant. The HARTING parts (09561625813 and 09561627813) are ROHS3 Compliant. Both compliance levels are acceptable for applications requiring RoHS certification.

Q: What is the voltage rating difference between the original part and the Amphenol ICC (FCI) substitutes?

A: The 17EBH015PAM210 is rated for 125V, while the 10090926 series substitutes are rated for 250V. The higher voltage rating of the substitute parts does not create compatibility issues; applications designed for 125V operation function correctly with 250V-rated connectors.

Q: Are there inventory considerations when selecting between substitute parts?

A: Current inventory levels vary: 10090926-P154XLF has the highest stock (5103 pcs), followed by 10090926-P154VLF (3886 pcs), 10090926-P156VLF (2406 pcs), 09561627813 (1072 pcs), 09561625813 (780 pcs), and 10090926-P156XLF (1445 pcs). Inventory availability may influence selection for high-volume applications.