Weidmüller 1799200000 Terminal Block Plug - Equivalent & Substitute Parts

Part Overview

The Weidmüller 1799200000 is a 5-position terminal block plug with female sockets, 0.150" (3.81mm) pitch, and 270° free-hanging wire entry configuration. This component is classified as Active product status and is designed for screw-clamping termination in industrial control and automation applications. Equivalent and substitute parts are identified based on matching electrical ratings, mechanical compatibility, and functional specifications to ensure seamless integration in existing circuit designs.

Substiute Parts

1799200000

WeidmüllerIn Stock: 11531799200000 Datasheet

Current PartRFQ

1828375

Phoenix ContactIn Stock: 9701828375 Datasheet

SimilarRFQ

1828524

Phoenix ContactIn Stock: 9861828524 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Weidmüller 1799200000 is determined by the following critical parameters:

• Pitch and Position Count: All substitutes must maintain 0.150" (3.81mm) pitch with 5 positions to ensure mechanical compatibility with mating connectors.
• Wire Entry Orientation: The 270° wire entry angle is a primary differentiator. Substitutes with matching 270° orientation provide direct mechanical and spatial compatibility.
• Electrical Ratings: Substitute parts must support minimum IEC voltage of 320 V and current capacity sufficient for the application. The main part specifies 17.5A (IEC), establishing the baseline current requirement.
• Termination Method: Screw-based termination is required for compatibility with existing installation practices.
• Mounting Configuration: Free-hanging (in-line) mounting must be preserved.
• Material and Compliance: UL94 V-0 flammability rating and RoHS compliance are mandatory for regulatory alignment.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute: Phoenix Contact 1828524

The Phoenix Contact 1828524 is the direct functional equivalent for the Weidmüller 1799200000. Both components share identical mechanical specifications: 5-position, 0.150" (3.81mm) pitch, 270° wire entry orientation, and free-hanging mounting. Both maintain UL94 V-0 flammability compliance and REACH unaffected status. The 1828524 operates at 8A (IEC) and 8A (UL), which is lower than the main part's 17.5A (IEC) and 10A (UL) ratings. This substitution is suitable for applications where the circuit current demand does not exceed 8A. Both components are Active status products with equivalent screw torque specifications (0.22-0.25 Nm).

Secondary Substitute: Phoenix Contact 1828375

The Phoenix Contact 1828375 shares the same pitch, position count, and termination method as the main part. However, the wire entry orientation differs at 90° versus the main part's 270°. This orientation difference affects spatial installation requirements and connector alignment. The 1828375 is suitable only when the 90° wire entry configuration aligns with the application's physical layout constraints. Like the 1828524, the 1828375 operates at 8A (IEC) and 8A (UL), making it applicable only to lower-current circuits. Both Phoenix Contact substitutes are Active status products with ROHS3 compliance.

Frequently Asked Questions (FAQ)

Q: Can Phoenix Contact 1828524 directly replace Weidmüller 1799200000 in all applications?

A: The 1828524 provides direct mechanical and electrical compatibility for applications operating at 8A or below. If your circuit requires the full 17.5A (IEC) capacity of the Weidmüller part, the Phoenix Contact substitute is not suitable due to its lower current rating.

Q: What is the significance of the 270° versus 90° wire entry orientation?

A: Wire entry orientation determines the physical direction of wire insertion into the connector. The 270° configuration (main part and 1828524) differs from the 90° configuration (1828375). Selection depends on the spatial layout of your installation and the position of mating connectors. Orientation mismatch prevents proper connector engagement.

Q: Are the screw termination specifications compatible between the main part and substitutes?

A: All three components use M2 screws with similar torque ranges (0.2-0.25 Nm for the main part, 0.22-0.25 Nm for Phoenix Contact parts). Installation procedures are compatible, though slight torque specification variations should be observed per manufacturer guidelines.

Q: Do the wire gauge ranges differ between the main part and substitutes?

A: The Weidmüller 1799200000 accepts 16-28 AWG (0.2-1.5mm²), while both Phoenix Contact substitutes accept 14-30 AWG (0.14-1.5mm²). The Phoenix Contact parts support a broader gauge range, including finer wires (14 AWG) and smaller cross-sections (0.14mm²).

Q: What compliance certifications apply to all three components?

A: All three parts maintain UL94 V-0 flammability ratings and REACH unaffected status. The Weidmüller part is RoHS Compliant, while both Phoenix Contact parts are ROHS3 Compliant. Both compliance levels are acceptable for industrial applications.

Q: Can I use Phoenix Contact 1828375 if my installation space requires 90° wire entry?

A: Yes, the 1828375 is mechanically and electrically compatible for applications where 90° wire entry aligns with your installation geometry and current requirements do not exceed 8A (IEC).