Phoenix Contact 1796173 Terminal Block Plug - Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 1796173 is a 9-position terminal block plug with female sockets, 0.200" (5.08mm) pitch, designed for 180° free-hanging in-line applications. This component features screwless spring cage termination, rated for 12A at 630V, and accommodates wire gauges from 12-24 AWG (0.2-2.5mm²). The part is currently obsolete, making substitute identification critical for ongoing system maintenance and component procurement.

Substiute Parts

1796173

Phoenix ContactIn Stock: 11511796173 Datasheet

Current PartRFQ

1796063

Phoenix ContactIn Stock: 11521796063 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Phoenix Contact 1796173 is determined by strict equivalence across the following critical parameters:

• Connector Architecture: 9 positions, single level, 0.200" (5.08mm) pitch spacing
• Electrical Ratings: 12A current capacity and 630V voltage rating
• Mechanical Interface: 180° free-hanging in-line orientation with screwless spring cage termination
• Wire Compatibility: Support for 12-24 AWG (0.2-2.5mm²) wire gauges
• Material & Compliance: Polyamide housing with UL94 V-0 flammability rating and RoHS compliance

The Phoenix Contact 1796063 qualifies as a direct substitute based on identical performance across all critical parameters. Both components belong to the COMBICON FKC series and maintain full electrical and mechanical compatibility.

Parameter Comparison

Engineering Selection Recommendations

The Phoenix Contact 1796063 is the qualified substitute for the obsolete 1796173. Both components maintain identical electrical performance (12A, 630V), mechanical compatibility (9-position, 5.08mm pitch, 180° free-hanging), and regulatory compliance (UL94 V-0, RoHS). The 1796063 carries active product status, ensuring continued availability and supply chain reliability. Selection of the 1796063 eliminates obsolescence risk while preserving full system compatibility.

Frequently Asked Questions (FAQ)

Q: Can the Phoenix Contact 1796063 directly replace the 1796173 in existing installations?

A: Yes. Both components are electrically and mechanically equivalent across all critical parameters: 9 positions, 5.08mm pitch, 12A/630V ratings, screwless spring cage termination, and identical wire gauge support (12-24 AWG). No circuit modifications or mechanical redesign is required.

Q: What is the primary difference between these two parts?

A: The 1796173 is obsolete, while the 1796063 maintains active product status. The 1796063 includes a mating flange feature not present in the 1796173, though this does not affect interchangeability in standard applications. Packaging differs (1796173 standard vs. 1796063 bulk).

Q: Are there any compliance or certification differences?

A: No. Both components carry identical certifications: UL94 V-0 flammability rating, RoHS compliance, and equivalent electrical safety ratings (630V IEC, 12A IEC).

Q: What wire gauges are compatible with the substitute part?

A: The 1796063 accommodates 12-24 AWG wire gauges, equivalent to 0.2-2.5mm² cross-section, matching the original 1796173 specification.

Q: Is the 1796063 available in the same packaging as the 1796173?

A: The 1796063 is supplied in bulk packaging, whereas the 1796173 packaging specification was not detailed. Verify packaging requirements with your procurement process, as this does not affect electrical or mechanical performance.