TE Connectivity AMP Connectors 1776137-6 Terminal Block Header Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 1776137-6 is a 6-position terminal block header with male pins, shrouded on four sides, designed for 90-degree right-angle through-hole mounting. This component operates at 300 V UL and 11 A UL current rating with an operating temperature range of -40°C to 110°C. The part is manufactured from polyamide (PA) nylon housing with phosphor bronze contacts and tin mating finish. Product status is active with RoHS compliance and unlimited moisture sensitivity level (MSL 1). Equivalent and substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when design flexibility is required within compatible electrical and mechanical specifications.

Substiute Parts

1776137-6

TE Connectivity AMP ConnectorsIn Stock: 10691776137-6 Datasheet

Current PartRFQ

1827907

Phoenix ContactIn Stock: 10741827907 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TE Connectivity 1776137-6 with the Phoenix Contact 1827907 is based on electrical and mechanical parameter compatibility. Both parts share identical specifications for the following critical parameters: 6-position configuration, 0.150" (3.81mm) pitch, 90-degree right-angle orientation, male pin header type with four-side shrouding, through-hole mounting, and solder termination. Both components maintain UL94 V-0 flammability rating, unlimited moisture sensitivity level (MSL 1), and identical insulation height of 0.285" (7.25mm). Voltage rating is equivalent at 300 V UL for both parts. Current rating for the substitute part is 8 A UL, which is lower than the main part's 11 A UL rating. Both parts are active products with current inventory availability and comply with RoHS standards. The substitute part uses polybutylene terephthalate (PBT) housing material instead of polyamide (PA) nylon, and includes both mating and mounting flanges compared to the main part's mating flange only.

Parameter Comparison

Engineering Selection Recommendations

Both the TE Connectivity 1776137-6 and Phoenix Contact 1827907 are active products with current inventory availability and meet UL94 V-0 flammability requirements. Selection between these parts is determined by application current requirements and housing material specifications. The TE Connectivity 1776137-6 supports 11 A UL current rating and uses polyamide (PA) nylon housing. The Phoenix Contact 1827907 supports 8 A UL current rating and uses polybutylene terephthalate (PBT) housing material. Both parts maintain identical voltage rating of 300 V UL, pitch of 0.150" (3.81mm), and insulation height of 0.285" (7.25mm). Both components comply with RoHS standards and maintain unlimited moisture sensitivity level (MSL 1). The Phoenix Contact substitute includes both mating and mounting flanges, while the TE Connectivity main part includes mating flange only. Contact tail length differs slightly: 0.122" (3.10mm) for the main part and 0.134" (3.40mm) for the substitute. Applications requiring current capacity above 8 A UL must use the TE Connectivity 1776137-6. Applications with current requirements at or below 8 A UL may use either part based on housing material and flange configuration requirements.

Frequently Asked Questions (FAQ)

Q: Can the Phoenix Contact 1827907 be used as a direct replacement for the TE Connectivity 1776137-6 in all applications?

A: The Phoenix Contact 1827907 is electrically and mechanically compatible for applications requiring 8 A UL current or less. Applications requiring the full 11 A UL current capacity of the TE Connectivity 1776137-6 must use the original part. Both parts share identical pitch, orientation, position count, and voltage rating.

Q: What are the differences in housing material between these two parts?

A: The TE Connectivity 1776137-6 uses polyamide (PA) nylon housing, while the Phoenix Contact 1827907 uses polybutylene terephthalate (PBT) housing. Both materials meet UL94 V-0 flammability requirements. Material selection may affect chemical resistance and thermal properties in specific operating environments.

Q: Are there differences in the flange configuration between these parts?

A: The TE Connectivity 1776137-6 includes a mating flange only. The Phoenix Contact 1827907 includes both mating and mounting flanges. This difference may affect mechanical mounting and alignment in the application.

Q: Do both parts have the same contact tail length?

A: No. The TE Connectivity 1776137-6 has a contact tail length of 0.122" (3.10mm), while the Phoenix Contact 1827907 has a contact tail length of 0.134" (3.40mm). This difference must be considered for PCB design and solder joint depth requirements.

Q: Are both parts RoHS compliant?

A: Yes. The TE Connectivity 1776137-6 is RoHS Compliant, and the Phoenix Contact 1827907 is ROHS3 Compliant. Both parts meet RoHS standards for hazardous substance restrictions.

Q: What is the moisture sensitivity level for both parts?

A: Both parts have a moisture sensitivity level (MSL) of 1, which indicates unlimited shelf life without moisture control requirements.

Q: Do both parts have the same pitch and orientation?

A: Yes. Both parts have a pitch of 0.150" (3.81mm) and 90-degree right-angle orientation. Both are configured as 6-position headers with male pins and four-side shrouding.

Q: What is the operating temperature range for the TE Connectivity 1776137-6?

A: The operating temperature range is -40°C to 110°C. Operating temperature range for the Phoenix Contact 1827907 is not specified in the provided parameters.