Weidmüller 1775342001 Terminal Block Header - Equivalent & Substitute Parts

Part Overview

The Weidmüller 1775342001 is a 13-position terminal block header with male pins, shrouded on four sides, featuring a 0.200" (5.08mm) pitch and 90° right-angle through-hole mounting. This component is part of the Omnimate SL series and is classified as obsolete. Due to its obsolete status, identifying equivalent substitute parts is essential for ongoing system maintenance, repairs, and new designs requiring compatible connectivity solutions.

Substiute Parts

1775342001

WeidmüllerIn Stock: 10751775342001 Datasheet

Current PartRFQ

1809186

Phoenix ContactIn Stock: 9181809186 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Weidmüller 1775342001 is determined by the following critical parameters:

• Number of Positions: Must be 13
• Pitch: Must be 0.200" (5.08mm)
• Header Orientation: Must be 90°, Right Angle
• Type: Must be Header with Male Pins, Shrouded (4 Side)
• Mounting Type: Must be Through Hole
• Termination Style: Must be Solder
• Voltage - IEC: Must support 400 V minimum
• Material Flammability Rating: Must meet UL94 V-0

The Phoenix Contact 1809186 meets all critical substitution criteria. Both components share identical mechanical and electrical specifications for position count, pitch, orientation, mounting method, and termination style. Both support the required voltage rating and flammability classification, ensuring functional compatibility in equivalent applications.

Parameter Comparison

Engineering Selection Recommendations

The Phoenix Contact 1809186 is a valid substitute for the Weidmüller 1775342001 based on matching mechanical and electrical specifications. The substitute part is currently in active production status, ensuring availability for replacement and new applications.

Both components meet UL94 V-0 flammability requirements and are RoHS compliant, satisfying regulatory and environmental standards. The substitute part carries ROHS3 compliance, representing current regulatory alignment.

The primary consideration is current rating: the substitute part is rated at 12A (IEC) and 15A (UL), compared to the original part's 27.5A (IEC) and 18.5A (UL). Applications requiring the full current capacity of the original part must evaluate whether the lower rating of the substitute is acceptable for the intended circuit design.

The contact tail length differs between the two parts (0.059" versus 0.138"), which may affect PCB layout and solder joint geometry. Verification of PCB pad design compatibility is necessary before implementation.

Frequently Asked Questions (FAQ)

Q: Can the Phoenix Contact 1809186 be used as a direct replacement for the Weidmüller 1775342001?

A: Yes, for applications where the current rating of 12A (IEC) or 15A (UL) is sufficient. The mechanical interface, pitch, position count, and voltage rating are identical. PCB layout must accommodate the different contact tail length.

Q: What is the primary difference between these two parts?

A: The current rating is lower on the Phoenix Contact substitute. The Weidmüller part supports 27.5A (IEC), while the Phoenix Contact part supports 12A (IEC). The contact tail length also differs, requiring PCB design verification.

Q: Are both parts RoHS compliant?

A: Yes. The Weidmüller 1775342001 is RoHS Compliant, and the Phoenix Contact 1809186 is ROHS3 Compliant. Both meet current environmental standards.

Q: Does the difference in contact tail length affect compatibility?

A: The contact tail length difference (0.059" versus 0.138") affects solder joint geometry and PCB pad design. Existing PCB layouts designed for the original part may require modification to accommodate the substitute's longer contact tail.

Q: Is the Phoenix Contact part currently available?

A: Yes. The Phoenix Contact 1809186 is in active production status with 838 units in stock, ensuring availability for immediate procurement and future orders.