1769052 Terminal Block Plug - Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 1769052 is a 6-position terminal block plug with female sockets, 0.200" (5.08mm) pitch, designed for 180° free-hanging in-line applications. This component is part of the COMBICON MSTBP series and is actively manufactured. Substitute parts are identified when equivalent electrical ratings, mechanical dimensions, and termination methods align with the original specification, enabling direct replacement in compatible applications.

Substiute Parts

1769052

Phoenix ContactIn Stock: 9521769052 Datasheet

Current PartRFQ

TJ0651560000G

Amphenol AnytekIn Stock: 2340TJ0651560000G Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 1769052 are identified based on strict alignment of the following critical parameters:

• Electrical Compatibility: Current and voltage ratings must meet or exceed the original specification (15 A UL, 300 V UL minimum)
• Mechanical Compatibility: 6 positions, 0.200" (5.08mm) pitch, 180° wire entry, free-hanging mounting
• Termination Method: Screw-based rising cage clamp termination
• Wire Gauge Support: Must accommodate the wire gauge range of the original part
• Regulatory Compliance: RoHS and flammability ratings (UL94 V-0)

The substitute part TJ0651560000G (Amphenol Anytek, Series 01-508) meets these criteria with equivalent mechanical dimensions, termination style, and regulatory compliance.

Parameter Comparison

Engineering Selection Recommendations

1769052 (Phoenix Contact) is the primary specification. This part is actively manufactured and RoHS compliant with full UL certification (15 A, 300 V).

TJ0651560000G (Amphenol Anytek) is a direct mechanical and electrical substitute with the following considerations:

• Electrical ratings: 12 A UL (lower than 15 A original). This part is suitable for applications requiring ≤12 A
• Wire gauge support: 12-24 AWG (narrower range than 0.2-2.5mm² original). Applications using 30 AWG or gauges below 1mm² require the original part
• Regulatory compliance: ROHS3 compliant, UL94 V-0 rated, meeting the same flammability standard
• Mechanical fit: Identical pitch, wire entry angle, and mounting configuration

Selection between these parts depends on application current requirements and wire gauge specifications.

Frequently Asked Questions (FAQ)

Q: Can TJ0651560000G replace 1769052 in all applications?

A: TJ0651560000G is mechanically and electrically compatible for applications requiring ≤12 A with wire gauges between 12-24 AWG. Applications requiring 15 A capacity or wire gauges outside this range require the original 1769052.

Q: What are the key differences between these parts?

A: The primary differences are current rating (12 A vs. 15 A) and wire gauge support (12-24 AWG vs. 12-30 AWG). Both parts share identical pitch, termination method, mounting style, and flammability rating.

Q: Are both parts RoHS compliant?

A: Yes. The 1769052 is RoHS Compliant, and the TJ0651560000G is ROHS3 Compliant. Both meet RoHS requirements.

Q: Do these parts have the same screw torque specification?

A: The screw size is identical (M3), but torque specifications differ slightly: 1769052 requires 0.5-0.6 Nm, while TJ0651560000G requires 0.56 Nm. Both fall within acceptable assembly ranges for M3 connections.

Q: What is the wire strip length for each part?

A: 1769052 specifies 7mm wire strip length. TJ0651560000G specifies 7-8mm, providing equivalent stripping requirements.

Q: Are retention latches present on both parts?

A: Yes. Both the 1769052 and TJ0651560000G feature retention latches on the non-wire side for secure mating.