Phoenix Contact 1768817 Terminal Block Plug - Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 1768817 is a 7-position terminal block plug with female sockets, 5mm pitch, and 225° wire entry orientation. This component is classified as Active product status and is designed for screw-based wire termination in industrial control and automation applications. Substitute parts are identified when equivalent electrical ratings, mechanical compatibility, and termination methods align with the original specification, enabling direct replacement in applications where wire entry angle and mounting orientation permit.

Substiute Parts

1768817

Phoenix ContactIn Stock: 8931768817 Datasheet

Current PartRFQ

796640-7

TE Connectivity AMP ConnectorsIn Stock: 868796640-7 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Phoenix Contact 1768817 is determined by the following critical parameters:

• Position Count & Pitch: 7 positions at 0.197" (5.00mm) spacing
• Connector Type: Plug with female sockets
• Termination Method: Screw-based rising cage clamp
• Electrical Ratings: Minimum 15 A (UL), 300 V (UL)
• Wire Gauge Compatibility: 12-30 AWG range
• Mounting Configuration: Free hanging (in-line)
• Flammability Compliance: UL94 V-0 rating
• RoHS Compliance: Compliant status

The substitute part TE Connectivity AMP Connectors 796640-7 meets these core criteria with equivalent position count, pitch, termination style, electrical ratings, and compliance certifications. The primary difference is wire entry angle (180° versus 225°), which affects physical installation orientation but does not impact electrical or mechanical compatibility when mounting space permits the alternative angle.

Parameter Comparison

Engineering Selection Recommendations

Phoenix Contact 1768817 remains the primary specification when 225° wire entry orientation is required by the application design or when Phoenix Contact series standardization is mandated.

TE Connectivity 796640-7 is a valid substitute when:

• Installation space accommodates 180° wire entry angle
• Broader wire gauge range (0.05-3mm²) provides additional flexibility for fine-gauge applications
• TE Connectivity component standardization is acceptable
• Both parts maintain Active product status and equivalent UL94 V-0 flammability compliance
• RoHS3 compliance of the TE part meets or exceeds RoHS requirements

Both components support identical electrical performance (15 A UL, 300 V UL), screw termination methodology (M3, rising cage clamp), and mechanical pitch (5mm). Selection between these parts depends on physical installation constraints related to wire entry angle and organizational component standardization policies.

Frequently Asked Questions (FAQ)

Q: Can TE Connectivity 796640-7 directly replace Phoenix Contact 1768817 in existing installations?

A: Direct replacement is possible when the 180° wire entry angle of the TE part accommodates the available installation space. The 225° angle of the Phoenix Contact part and 180° angle of the TE part represent different physical orientations. Verify that panel cutouts, wire routing, and connector positioning allow the alternative angle before substitution.

Q: Are the electrical ratings identical between these two parts?

A: Both parts are rated for 15 A (UL) and 300 V (UL). Electrical performance is equivalent for standard industrial control applications within these ratings.

Q: What is the difference in wire gauge acceptance?

A: Phoenix Contact 1768817 accepts 0.2-2.5mm² (12-30 AWG). TE Connectivity 796640-7 accepts 0.05-3mm² (12-30 AWG). The TE part accommodates finer gauge wires below 0.2mm² and larger conductors up to 3mm², providing broader wire size flexibility.

Q: Do both parts use the same screw termination method?

A: Yes. Both employ M3 screw-based rising cage clamp termination. Torque specifications differ slightly (Phoenix Contact: 0.5-0.6 Nm; TE Connectivity: 0.79 Nm), so verify torque tool settings during installation.

Q: Are compliance certifications equivalent?

A: Both parts carry UL94 V-0 flammability ratings and Active product status. Phoenix Contact 1768817 is RoHS Compliant; TE Connectivity 796640-7 is ROHS3 Compliant. ROHS3 represents current regulatory compliance and is acceptable for new designs.

Q: What is the primary limiting factor for substitution?

A: Wire entry angle (225° versus 180°) is the primary physical constraint. Electrical and mechanical specifications are fully compatible. Confirm installation geometry permits the alternative angle before proceeding with substitution.