TE Connectivity 176292-6 Rectangular Connector Housing Equivalent & Substitute Parts

Part Overview

The TE Connectivity 176292-6 is a 2-position rectangular connector receptacle housing designed for the Universal Power series. This component is a panel mount, snap-in receptacle with crimp contact termination and latch lock fastening. The housing accommodates 0.156" (3.96mm) pitch tab contacts and is constructed from polyamide (PA66) nylon material rated for -30°C to 105°C operating temperatures.

The 176292-6 is classified as an active product with ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Substitute parts are identified to provide alternative sourcing options when the primary part number is unavailable or when specific packaging or color requirements necessitate component alternatives.

Substiute Parts

176292-6

TE Connectivity AMP ConnectorsIn Stock: 942176292-6 Datasheet

Current PartRFQ

176292-2

TE Connectivity AMP ConnectorsIn Stock: 4287176292-2 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 176292-6 is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Connector Type: Receptacle
• Number of Positions: 2
• Pitch: 0.156" (3.96mm)
• Contact Type: Tab
• Mounting Type: Panel Mount, Snap-In
• Contact Termination: Crimp
• Fastening Type: Latch Lock
• Insulation Material: Polyamide (PA66), Nylon 6/6
• Operating Temperature Range: -30°C ~ 105°C
• Series: Universal Power
• Product Status: Active
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

Variable Parameters (Non-Critical for Substitution):

• Color (Blue vs. Red)
• Packaging configuration

The substitute part 176292-6 shares identical electrical and mechanical specifications with the main part number, with variation only in housing color and packaging format. Both parts are manufactured by TE Connectivity AMP Connectors and maintain full compatibility within the Universal Power connector series.

Parameter Comparison

Engineering Selection Recommendations

Both the 176292-6 and 176292-2 are active products manufactured by TE Connectivity AMP Connectors and maintain full ROHS3 compliance with unlimited moisture sensitivity rating. Selection between these parts is based on the following criteria:

176292-6 (Blue Housing): Select this part number when blue color coding is required for circuit identification, polarity marking, or system-level color conventions. Current inventory: 899 pieces.

176292-2 (Red Housing): Select this part number when red color coding is required for circuit identification, polarity marking, or system-level color conventions. This part is available in bulk packaging with higher inventory availability: 4,239 pieces.

Both parts share identical electrical performance, mechanical dimensions, contact pitch, mounting configuration, and operating temperature specifications. The selection between these two part numbers is determined solely by color requirement and packaging preference. No functional or performance differences exist between the two options.

Frequently Asked Questions (FAQ)

Q: Can 176292-2 be used as a direct replacement for 176292-6?

A: Yes. The 176292-2 is a direct functional equivalent to the 176292-6. Both parts are 2-position receptacle housings with 0.156" (3.96mm) pitch, crimp termination, latch lock fastening, and identical operating temperature ranges. The only difference is housing color: 176292-6 is blue, while 176292-2 is red.

Q: Are there any electrical performance differences between these part numbers?

A: No. Both parts are constructed from identical polyamide (PA66) nylon material, support the same contact type and pitch, and operate across the same temperature range (-30°C to 105°C). Electrical performance is equivalent.

Q: What is the significance of the color difference?

A: Color serves as a visual identifier for circuit polarity, system organization, or application-specific coding conventions. The color difference does not affect electrical or mechanical function. Selection is based on system requirements for color coding.

Q: Are both parts ROHS3 compliant?

A: Yes. Both 176292-6 and 176292-2 are ROHS3 compliant with MSL 1 (unlimited moisture sensitivity rating).

Q: What is the difference in packaging between these parts?

A: The 176292-6 is supplied in standard packaging, while the 176292-2 is available in bulk packaging. Both are new original stock from TE Connectivity.

Q: Can I mix 176292-6 and 176292-2 in the same assembly?

A: Yes. Both parts are mechanically and electrically compatible within the Universal Power series. They can be used interchangeably in the same circuit or assembly, with selection based on color coding requirements.

Q: Do these parts include contacts?

A: No. Both 176292-6 and 176292-2 are housings only. Contacts are not included and must be sourced separately.

Q: What is the base product number for these parts?

A: The base product number is 176292. Both 176292-6 and 176292-2 are variants of this base product, differentiated by color and packaging.