Weidmüller 1761592001 Terminal Block Header - Equivalent & Substitute Parts

Part Overview

The Weidmüller 1761592001 is a 7-position terminal block header with male pins, shrouded design, and 4.6mm pitch for 90° right-angle through-hole mounting. This component is classified as obsolete, making identification of equivalent and substitute parts essential for ongoing system maintenance and new design implementations. Substitute parts must maintain electrical performance, mechanical compatibility, and mounting characteristics to ensure direct interchangeability in circuit applications.

Substiute Parts

1761592001

WeidmüllerIn Stock: 10721761592001 Datasheet

Current PartRFQ

1841680000

WeidmüllerIn Stock: 11321841680000 Datasheet

DirectRFQ

284512-7

TE Connectivity AMP ConnectorsIn Stock: 863284512-7 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 1761592001 are identified based on strict electrical and mechanical parameter alignment. The primary substitution criteria are:

• Electrical Compatibility: Current and voltage ratings must meet or exceed the original specification (15A IEC / 320V IEC minimum)
• Mechanical Compatibility: 7 positions, 4.6mm pitch, 90° right-angle orientation, through-hole mounting, and shrouded male pin design
• Termination Method: Solder termination required
• Regulatory Compliance: RoHS compliance and UL94 V-0 flammability rating

Two substitute parts meet these criteria:

1. 1841680000 (Weidmüller, Direct Manufacturer Equivalent): Identical electrical and mechanical specifications with active product status. Primary difference is contact tail length (0.126" vs. 0.059").

2. 284512-7 (TE Connectivity AMP Connectors, Cross-Manufacturer Substitute): Meets core electrical and mechanical requirements with UL current rating of 11A and operating temperature range of -40°C ~ 110°C. Housing material differs (Polyamide PA66 vs. LCP).

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute: 1841680000 (Weidmüller)

The 1841680000 is the direct manufacturer equivalent with identical electrical ratings, pitch, position count, and orientation. Both parts share the same series designation (Omnimate SL), housing material (LCP glass-filled), and contact material (copper alloy). The 1841680000 carries active product status, ensuring ongoing availability and supply chain continuity. The extended contact tail length (0.126" vs. 0.059") requires PCB layout verification to confirm through-hole depth compatibility, but this represents the only mechanical variance.

Secondary Substitute: 284512-7 (TE Connectivity AMP Connectors)

The 284512-7 provides cross-manufacturer substitution with equivalent electrical performance and mechanical form factor. UL current rating of 11A exceeds the original 10A specification. Operating temperature range extends to 110°C, providing broader thermal tolerance. Housing material differs (polyamide PA66 vs. LCP), and contact material is phosphor bronze rather than copper alloy. These material differences do not compromise electrical function but may affect mechanical durability in high-vibration or thermal cycling applications. The 284512-7 is suitable for applications where cross-manufacturer sourcing is acceptable and thermal performance enhancement is beneficial.

Frequently Asked Questions (FAQ)

Q: Can 1841680000 be used as a direct drop-in replacement for 1761592001?

A: Yes, with PCB layout verification. Electrical specifications are identical. The primary consideration is contact tail length: 1841680000 has 0.126" (3.20mm) tails versus 0.059" (1.50mm) on the original. Confirm that PCB through-hole depth accommodates the longer tail length.

Q: What is the key difference between 1841680000 and 284512-7?

A: Both maintain 7-position, 4.6mm pitch, 90° right-angle configuration. The 1841680000 is a Weidmüller part with identical housing material (LCP) and contact material (copper alloy). The 284512-7 is a TE Connectivity part with polyamide housing and phosphor bronze contacts. Electrical ratings are equivalent; material composition differs.

Q: Are there packaging differences between these parts?

A: The 1761592001 was supplied in standard packaging (status not specified). The 1841680000 is supplied in bulk packaging. The 284512-7 is supplied in bulk packaging. Packaging format does not affect component function or interchangeability.

Q: Does the operating temperature range difference affect substitution?

A: The 1761592001 operates from -50°C to 100°C. The 284512-7 extends to -40°C minimum and 110°C maximum. For applications within the original -50°C to 100°C range, both parts are suitable. For applications requiring -50°C operation, only the 1761592001 or 1841680000 are appropriate.

Q: Are all three parts RoHS compliant?

A: Yes. The 1761592001, 1841680000, and 284512-7 are all RoHS compliant with UL94 V-0 flammability rating, meeting regulatory requirements for industrial and consumer applications.