Weidmüller 1753062001 Terminal Block Header - Equivalent & Substitute Parts

Part Overview

The Weidmüller 1753062001 is a 10-position terminal block header from the Omnimate SL series, designed for vertical through-hole mounting with male pins and 4-side shrouding. This component operates at 15A (IEC) / 10A (UL) and 320V (IEC) / 300V (UL), making it suitable for industrial control and power distribution applications. The part is currently active in production with full RoHS compliance and UL94 V-0 flammability rating. Equivalent substitute parts are identified based on matching electrical ratings, mechanical configuration, and connector specifications to ensure direct functional replacement in circuit designs.

Substiute Parts

1753062001

WeidmüllerIn Stock: 6961753062001 Datasheet

Current PartRFQ

1836990000

WeidmüllerIn Stock: 20591836990000 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the Weidmüller 1753062001 are identified based on strict equivalence of the following critical parameters:

• Electrical Compatibility: Current and voltage ratings must match or exceed the original specification (15A IEC / 10A UL; 320V IEC / 300V UL)
• Mechanical Configuration: Number of positions (10), pitch (4.60mm), header orientation (vertical), and mounting type (through hole) must be identical
• Connector Type: Male pins with 4-side shrouding required for physical and electrical compatibility
• Termination Method: Solder termination only
• Material and Compliance: Housing material, contact material, flammability rating (UL94 V-0), and RoHS compliance must be equivalent or superior

The substitute part 1836990000 meets all these criteria and is classified as a direct equivalent. The primary difference is the contact tail length (0.126" vs. 0.059"), which does not affect electrical performance or functional compatibility in standard PCB applications.

Parameter Comparison

Engineering Selection Recommendations

Both the Weidmüller 1753062001 and 1836990000 are active production parts with identical electrical ratings, mechanical configurations, and compliance certifications. Selection between these parts should be based on the following engineering considerations:

1753062001 (Primary Part): Shorter contact tail length (0.059") is suitable for standard PCB applications with typical copper trace thickness and solder pad geometry. Current inventory: 663 units.

1836990000 (Substitute Part): Longer contact tail length (0.126") provides extended solder engagement and may be preferred for applications requiring enhanced mechanical robustness or non-standard PCB designs. Current inventory: 2010 units.

Both parts carry identical RoHS compliance, UL94 V-0 flammability certification, and moisture sensitivity level (MSL 1 - Unlimited), ensuring equivalent performance in regulated and industrial environments. The choice between these parts does not affect electrical performance, thermal characteristics, or compliance status.

Frequently Asked Questions (FAQ)

Q: Can 1836990000 be used as a direct replacement for 1753062001?

A: Yes. Both parts are electrically and mechanically equivalent with identical current ratings (15A IEC / 10A UL), voltage ratings (320V IEC / 300V UL), pitch (4.60mm), position count (10), and connector type (male pins, 4-side shrouded). The only difference is contact tail length, which does not affect functional compatibility in standard applications.

Q: What is the significance of the contact tail length difference?

A: Contact tail length affects solder joint geometry and mechanical engagement with the PCB. The 1753062001 has a shorter tail (0.059"), while 1836990000 has a longer tail (0.126"). Both are suitable for through-hole solder termination; selection depends on PCB design specifications and solder pad geometry.

Q: Are both parts RoHS compliant?

A: Yes. Both 1753062001 and 1836990000 are RoHS Compliant and carry UL94 V-0 flammability certification, meeting regulatory requirements for industrial and consumer applications.

Q: What is the operating temperature range for these parts?

A: Both parts operate across -50°C to 100°C, suitable for industrial control systems, power distribution, and temperature-variable environments.

Q: Are there any differences in housing or contact materials?

A: No. Both parts use identical housing material (Liquid Crystal Polymer with glass fill) and contact material (Copper Alloy with tin mating finish), ensuring equivalent electrical performance and reliability.

Q: Which part should I select based on current inventory?

A: Part 1836990000 has higher current inventory (2010 units vs. 663 units). If supply continuity is a concern, 1836990000 may be the preferred choice. Both parts are active production items.