TE Connectivity AMP Connectors 175271-1 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 175271-1 is a tab contact rectangular connector designed for crimp termination of 18-22 AWG wire gauges with tin plating. This component belongs to the Mark II series and is classified as a Last Time Buy product, indicating discontinued production with limited remaining inventory of 708 pieces.

The necessity to identify equivalent and substitute parts arises from the Last Time Buy status of this component. Organizations requiring continued supply of functionally equivalent tab contacts must evaluate alternative sources to ensure long-term component availability and maintain production continuity.

Substiute Parts

175271-1

TE Connectivity AMP ConnectorsIn Stock: 804175271-1 Datasheet

Current PartRFQ

IL-AG5-PC1-5000

JAE ElectronicsIn Stock: 1000272IL-AG5-PC1-5000 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TE Connectivity 175271-1 is evaluated based on the following critical parameters that determine functional equivalence:

Wire Gauge Compatibility: Both the main part and substitute must support 18-22 AWG wire termination to ensure proper crimp contact and electrical performance.

Contact Termination Method: Crimp termination is the specified method for both parts, ensuring compatibility with existing assembly processes and tooling.

Contact Finish: Tin plating on both parts provides equivalent corrosion resistance and electrical conductivity characteristics.

Compliance Standards: ROHS3 compliance and MSL 1 rating must be maintained across substitute selections to meet regulatory and environmental requirements.

Connector Category: Both parts function within the rectangular connector category, maintaining form factor and interface compatibility.

The substitute part IL-AG5-PC1-5000 from JAE Electronics meets all specified parameters. However, a critical distinction exists: the main part 175271-1 is a tab contact, while the substitute IL-AG5-PC1-5000 is a pin contact. This difference in contact type represents a fundamental change in connector interface geometry and mating characteristics.

Parameter Comparison

Engineering Selection Recommendations

TE Connectivity 175271-1 Selection Criteria:

The TE Connectivity 175271-1 remains the primary component choice when existing connector assemblies utilize tab contact interfaces. Current inventory of 708 pieces supports immediate procurement requirements. ROHS3 compliance and MSL 1 rating satisfy regulatory and environmental specifications. However, Last Time Buy status indicates this component will not be available for future replenishment.

JAE Electronics IL-AG5-PC1-5000 Selection Criteria:

The JAE Electronics IL-AG5-PC1-5000 is classified as Active product status, ensuring long-term availability and supply continuity. ROHS3 compliance and MSL 1 rating match the original component specifications. The IL-AG5-PC1-5000 is supplied in Cut Tape packaging, suitable for automated assembly processes. The critical distinction is the pin contact type versus the tab contact type of the original part. This contact geometry difference requires connector housing compatibility verification before implementation.

Organizations facing TE Connectivity 175271-1 supply constraints must evaluate whether connector housing designs accommodate pin contact interfaces or require redesign to tab contact specifications.

Frequently Asked Questions (FAQ)

Q: Can the JAE Electronics IL-AG5-PC1-5000 directly replace the TE Connectivity 175271-1 in existing assemblies?

A: Direct replacement is not possible without connector housing modification. The TE Connectivity 175271-1 is a tab contact, while the JAE Electronics IL-AG5-PC1-5000 is a pin contact. These contact types have different mating geometries and require different connector housing receptacles. Compatibility depends on whether the connector housing design accepts pin contacts.

Q: What wire gauges are supported by both parts?

A: Both the TE Connectivity 175271-1 and JAE Electronics IL-AG5-PC1-5000 support 18-22 AWG wire gauges. This parameter is identical across both components.

Q: Are both parts RoHS compliant?

A: Yes, both the TE Connectivity 175271-1 and JAE Electronics IL-AG5-PC1-5000 are ROHS3 compliant. Both components meet current environmental and regulatory requirements.

Q: What is the Moisture Sensitivity Level for these parts?

A: Both components have an MSL rating of 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.

Q: Why is the TE Connectivity 175271-1 marked as Last Time Buy?

A: Last Time Buy status indicates TE Connectivity has discontinued production of this component. Current inventory of 708 pieces represents the final available stock. No future replenishment will be available from the manufacturer.

Q: What packaging format is the JAE Electronics IL-AG5-PC1-5000 supplied in?

A: The JAE Electronics IL-AG5-PC1-5000 is supplied in Cut Tape (CT) packaging, suitable for automated pick-and-place assembly equipment.

Q: Are the contact termination methods identical?

A: Yes, both the TE Connectivity 175271-1 and JAE Electronics IL-AG5-PC1-5000 utilize crimp termination. This ensures compatibility with existing crimping tools and assembly processes.

Q: What is the contact finish material for both parts?

A: Both components feature tin plating as the contact finish material, providing equivalent corrosion resistance and electrical conductivity characteristics.