Weidmüller 1741760000 Terminal Block Plug - Equivalent & Substitute Parts

Part Overview

The Weidmüller 1741760000 is a 14-position terminal block plug with female sockets, 0.200" (5.08mm) pitch, and 225° free-hanging in-line configuration. This component is classified as obsolete product status. Identifying equivalent substitute parts is necessary to maintain system compatibility and ensure continued availability for applications requiring this terminal block specification.

Substiute Parts

1741760000

WeidmüllerIn Stock: 11081741760000 Datasheet

Current PartRFQ

1946370000

WeidmüllerIn Stock: 10131946370000 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the Weidmüller 1741760000 is based on the following critical parameters that must remain consistent:

• Connector Type & Configuration: 14-position plug with female sockets, 0.200" (5.08mm) pitch, 225° wire entry angle, free-hanging in-line mounting
• Electrical Ratings: Current and voltage specifications (IEC and UL standards)
• Termination Method: Screw-clamping yoke (tension sleeve) termination
• Wire Compatibility: Wire gauge range acceptance
• Material & Safety Compliance: PBT housing, UL94 V-0 flammability rating, operating temperature range
• Contact Material: Copper alloy with tin mating finish

The substitute part Weidmüller 1946370000 maintains these core parameters while offering enhanced electrical ratings and expanded wire gauge compatibility.

Parameter Comparison

Engineering Selection Recommendations

The Weidmüller 1946370000 is a direct substitute for the obsolete 1741760000 within the Omnimate BL series. Both components share identical mechanical configuration, pitch, wire entry angle, and termination methodology. The substitute part maintains full compatibility with existing connector interfaces and mounting requirements.

The 1946370000 offers improved electrical performance with higher current ratings (17.5A IEC, 15A UL versus 16.5A IEC, 10A UL) and expanded wire gauge acceptance (12-30 AWG / 0.2-4mm² versus 12-26 AWG / 0.2-2.5mm²). Both parts maintain equivalent safety certifications (UL94 V-0) and operating temperature specifications (-50°C ~ 100°C).

The substitute part carries active product status with RoHS compliance and MSL 1 rating, providing superior long-term availability and regulatory alignment compared to the obsolete main part.

Frequently Asked Questions (FAQ)

Q: Can the 1946370000 directly replace the 1741760000 in existing applications?

A: Yes. Both components maintain identical 14-position configuration, 0.200" (5.08mm) pitch, 225° wire entry, free-hanging mounting, and screw-clamping termination. Mechanical and electrical interfaces are fully compatible.

Q: What are the key differences between these parts?

A: The 1946370000 provides higher current ratings (IEC: 17.5A vs. 16.5A; UL: 15A vs. 10A) and accepts larger wire gauges (up to 30 AWG and 4mm² versus 26 AWG and 2.5mm²). The substitute part is active product status with RoHS compliance, while the main part is obsolete.

Q: Are there packaging differences between the two parts?

A: The 1741760000 is supplied in standard packaging, while the 1946370000 is supplied in bulk packaging. Both are new original stock.

Q: Do both parts meet the same safety and compliance standards?

A: Yes. Both components carry UL94 V-0 flammability rating, REACH Unaffected status, and EAR99 ECCN classification. Operating temperature range is identical at -50°C ~ 100°C.

Q: Which part should be selected for new designs?

A: The 1946370000 is recommended for new designs due to active product status, improved electrical ratings, expanded wire gauge compatibility, and RoHS compliance. This part provides superior long-term availability and regulatory alignment.