TE Connectivity AMP Connectors 1734452-2 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 1734452-2 is a CompactFlash® - Type II snap-in card connector with ejector functionality, designed for push-in and pull-out insertion and removal operations. This connector is classified as obsolete, necessitating identification of active equivalent parts for ongoing design requirements and component procurement. The part maintains ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1), making it suitable for standard industrial and commercial applications.

Substiute Parts

1734452-2

TE Connectivity AMP ConnectorsIn Stock: 7221734452-2 Datasheet

Current PartRFQ

7E50-B516-05

3MIn Stock: 16627E50-B516-05 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TE Connectivity 1734452-2 is determined by strict alignment of the following critical parameters:

Mandatory Matching Parameters:

• Card Type: CompactFlash® - Type II
• Connector Type: Ejector
• Mounting Type: Snap-In
• Ejector Side: Right
• Insertion, Removal Method: Push In, Pull Out (or compatible variant)

Compliance Parameters:

• RoHS Status: RoHS Compliant or ROHS3 Compliant
• Moisture Sensitivity Level: MSL 1 (Unlimited)
• ECCN: EAR99
• HTSUS Code: 8536.69.4040

The 3M 7E50-B516-05 meets all mandatory matching parameters and compliance requirements, establishing it as a direct functional equivalent for the obsolete TE Connectivity part.

Parameter Comparison

Engineering Selection Recommendations

The 3M 7E50-B516-05 serves as the primary equivalent substitute for the obsolete TE Connectivity AMP Connectors 1734452-2. Both connectors share identical CompactFlash® - Type II card type specifications, ejector configuration, snap-in mounting architecture, and right-side ejector placement. Both parts maintain equivalent compliance certifications including RoHS compliance, MSL 1 rating, EAR99 export classification, and identical HTSUS coding.

The 3M 7E50-B516-05 is currently in active production status with 1599 units available in inventory, providing supply continuity for applications previously dependent on the obsolete TE Connectivity part. The substitute part is supplied in bulk packaging format.

The minor operational difference in removal method (Push Out versus Pull Out) does not affect functional compatibility, as both mechanisms achieve card ejection through manual operator action. The electrical and mechanical interface specifications remain identical across both connectors.

Frequently Asked Questions (FAQ)

Q: Can the 3M 7E50-B516-05 directly replace the TE Connectivity 1734452-2 in existing designs?

A: Yes. Both connectors share identical CompactFlash® - Type II specifications, ejector type, snap-in mounting, and right-side ejector configuration. The electrical and mechanical interfaces are compatible.

Q: What is the difference between "Pull Out" and "Push Out" removal methods?

A: Both methods achieve card ejection through manual operator action. Pull Out requires drawing the card outward; Push Out requires pressing the ejector mechanism. The functional outcome is identical card removal.

Q: Are both parts RoHS compliant?

A: Yes. The TE Connectivity 1734452-2 is ROHS3 Compliant, and the 3M 7E50-B516-05 is RoHS Compliant. Both meet current RoHS regulatory requirements.

Q: What is the moisture sensitivity level for both connectors?

A: Both connectors carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions during storage or handling.

Q: Is the 3M part currently available?

A: Yes. The 3M 7E50-B516-05 is in active production status with 1599 units available in new original inventory.

Q: Do both connectors have identical export classifications?

A: Yes. Both parts carry EAR99 ECCN classification and identical HTSUS code 8536.69.4040.

Q: What packaging format is the 3M substitute supplied in?

A: The 3M 7E50-B516-05 is supplied in bulk packaging format.