TE Connectivity AMP Connectors 172780-1 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 172780-1 is a tab contact connector designed for crimp termination of 18-22 AWG wire gauges with tin plating finish. This component belongs to the MIC (Multi-Interlock) series of rectangular connectors and is classified as obsolete. Due to its obsolete product status, identification of equivalent and substitute parts is necessary to maintain design continuity and ensure component availability for ongoing production and maintenance applications.

Substiute Parts

172780-1

TE Connectivity AMP ConnectorsIn Stock: 993172780-1 Datasheet

Current PartRFQ

IL-AG5-PC1-5000

JAE ElectronicsIn Stock: 1000272IL-AG5-PC1-5000 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TE Connectivity 172780-1 is determined by alignment of the following critical parameters:

Wire Gauge Compatibility: Both the main part and substitute must support 18-22 AWG wire termination to ensure proper crimp contact and electrical performance.

Contact Termination Method: Crimp termination is the specified method for both parts, ensuring compatibility with existing assembly processes and tooling.

Contact Finish: Tin plating on both parts provides equivalent corrosion resistance and electrical conductivity characteristics.

Regulatory Compliance: Both parts must maintain ROHS3 compliance, REACH unaffected status, and identical ECCN and HTSUS classifications to satisfy procurement and export requirements.

Moisture Sensitivity Level: MSL 1 (Unlimited) classification on both parts indicates equivalent handling and storage requirements.

The substitute part IL-AG5-PC1-5000 from JAE Electronics meets all these critical parameters, though it differs in contact type (pin versus tab) and series designation. This difference reflects the functional equivalence required for connector contact substitution in rectangular connector applications.

Parameter Comparison

Engineering Selection Recommendations

The JAE Electronics IL-AG5-PC1-5000 serves as the designated substitute for the obsolete TE Connectivity 172780-1. Selection of this substitute is supported by the following engineering factors:

Product Status Alignment: The substitute part maintains active product status, ensuring continued availability and manufacturer support, whereas the original part is obsolete and subject to supply discontinuation.

Regulatory Compliance: Both parts maintain identical ROHS3 compliance, REACH unaffected status, and export classification (EAR99), eliminating regulatory barriers to substitution.

Electrical and Mechanical Specifications: The substitute part matches all critical functional parameters including wire gauge range (18-22 AWG), contact termination method (crimp), contact finish (tin), and moisture sensitivity classification (MSL 1).

Inventory Availability: The substitute part demonstrates significantly higher inventory levels (1,000,200 pieces) compared to the original part (964 pieces), providing superior supply chain reliability for ongoing production requirements.

Frequently Asked Questions (FAQ)

Q: Can the JAE Electronics IL-AG5-PC1-5000 directly replace the TE Connectivity 172780-1 in existing connector assemblies?

A: The IL-AG5-PC1-5000 is functionally equivalent for crimp termination of 18-22 AWG wire with tin plating. However, the contact type differs (pin versus tab). Compatibility depends on the specific connector housing design and mating requirements of your application. Verify that the pin contact configuration of the substitute aligns with your connector housing specifications.

Q: Are there any compliance or regulatory differences between these parts?

A: No. Both parts maintain identical ROHS3 compliance, REACH unaffected status, EAR99 export classification, and HTSUS code (8536.90.4000). Substitution does not introduce regulatory compliance concerns.

Q: What is the significance of the MSL 1 (Unlimited) rating for both parts?

A: MSL 1 classification indicates that both parts have unlimited shelf life and do not require special moisture-controlled storage or handling procedures. This simplifies inventory management and reduces storage costs.

Q: Why is the substitute part listed as active while the original is obsolete?

A: The TE Connectivity 172780-1 has reached end-of-life status and is no longer manufactured. The JAE Electronics IL-AG5-PC1-5000 remains in active production, ensuring long-term availability and manufacturer support for new designs and replacement requirements.

Q: Does the packaging format affect substitution compatibility?

A: The substitute part is supplied in Cut Tape (CT) packaging. Packaging format does not affect electrical or mechanical compatibility but may influence handling procedures and integration into automated assembly processes. Verify that your assembly equipment accommodates the CT packaging format.