172-015-282-021 D-Sub Receptacle 15 Position Equivalent & Substitute Parts

Part Overview

The 172-015-282-021 is a 15 Position D-Sub Receptacle connector manufactured by NorComp Inc., featuring female sockets with panel mount, through-hole solder termination. This connector is part of the 172 series and is currently in active stock with 925 units available. Alternative equivalent parts are necessary to support supply chain flexibility, design revisions, and procurement optimization across multiple manufacturers including TE Connectivity and Amphenol ICC.

Substiute Parts

172-015-282-021

NorComp Inc.In Stock: 1000172-015-282-021 Datasheet

Current PartRFQ

172-015-283L021

NorComp Inc.In Stock: 963172-015-283L021 Datasheet

DirectRFQ

205736-7

TE Connectivity AMP ConnectorsIn Stock: 824205736-7 Datasheet

SimilarRFQ

5-827190-1

TE Connectivity AMP ConnectorsIn Stock: 9395-827190-1 Datasheet

SimilarRFQ

FCE17A15SN280

Amphenol ICC (Commercial Products)In Stock: 1085FCE17A15SN280 Datasheet

SimilarRFQ

FCE17A15SN2E0

Amphenol ICC (Commercial Products)In Stock: 1105FCE17A15SN2E0 Datasheet

SimilarRFQ

FCE17A15SN480

Amphenol ICC (Commercial Products)In Stock: 1026FCE17A15SN480 Datasheet

SimilarRFQ

FCE17A15SN4D0

Amphenol ICC (Commercial Products)In Stock: 975FCE17A15SN4D0 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 172-015-282-021 are classified based on the following critical parameters that determine functional equivalence:

Primary Substitution Criteria:

• Connector Type: Receptacle, Female Sockets
• Number of Positions: 15
• Number of Rows: 2
• Shell Size, Connector Layout: 2 (DA, A)
• Termination: Solder
• Material Flammability Rating: UL94 V-0
• Current Rating: 5A minimum

Secondary Compatibility Parameters:

• Mounting Type: Panel Mount or Through Hole
• Shell Material and Finish variations
• Contact Finish: Gold plated
• Operating Temperature range compatibility
• RoHS and REACH compliance status

Parts are grouped into direct manufacturer equivalents (NorComp 172 series) and cross-manufacturer alternatives (TE Connectivity AMPLIMITE series and Amphenol ICC FCE17 series) that meet the core electrical and mechanical specifications.

Parameter Comparison

Engineering Selection Recommendations

Direct NorComp Equivalent (Preferred for Specification Compliance): The 172-015-283L021 is the direct equivalent within the NorComp 172 series. It maintains identical electrical and mechanical specifications, including operating temperature range (-50°C ~ 125°C), ROHS3 compliance, and panel mount configuration. This part is recommended when strict adherence to original specifications is required.

TE Connectivity AMPLIMITE Alternative (205736-7): The 205736-7 meets core connector specifications but differs in RoHS status (non-compliant) and operating temperature range (-55°C ~ 105°C). This part is suitable for applications where RoHS compliance is not mandated and operating temperature requirements fall within the specified range. Current rating is 6A, exceeding the 5A requirement.

Amphenol ICC FCE17 Series Alternatives (FCE17A15SN280, FCE17A15SN2E0, FCE17A15SN480, FCE17A15SN4D0): All four Amphenol ICC FCE17 variants are RoHS compliant and feature gold-plated contacts. Operating temperature range is -40°C ~ 85°C, which is narrower than the main part. FCE17A15SN480 and FCE17A15SN4D0 include panel mount capability matching the original specification. These parts are suitable for applications within the reduced temperature range and where RoHS compliance is required.

Frequently Asked Questions (FAQ)

Q: Can 172-015-283L021 be used as a direct replacement for 172-015-282-021? A: Yes. Both parts are from the NorComp 172 series with identical connector type, position count, shell size, termination method, and operating temperature range. The primary difference is packaging (Tray vs. standard).

Q: What are the key differences between NorComp and Amphenol ICC substitutes? A: NorComp parts maintain the -50°C ~ 125°C operating temperature range and ROHS3 compliance. Amphenol ICC FCE17 series parts operate within -40°C ~ 85°C and are RoHS compliant. Shell finish differs: NorComp uses nickel plating, while Amphenol ICC uses tin plating.

Q: Is the TE Connectivity 205736-7 suitable for new designs? A: The 205736-7 meets electrical and mechanical specifications but is RoHS non-compliant. It is suitable only for applications where RoHS compliance is not a requirement. Current rating is 6A, providing margin above the 5A specification.

Q: Which substitute parts support panel mount configuration? A: The 172-015-283L021 (NorComp), FCE17A15SN480, and FCE17A15SN4D0 (Amphenol ICC) all support panel mount with through-hole termination. The 205736-7 and FCE17A15SN280/SN2E0 support through-hole termination only.

Q: Are there temperature range limitations when substituting with Amphenol ICC parts? A: Yes. Amphenol ICC FCE17 series parts operate within -40°C ~ 85°C, which is narrower than the original -50°C ~ 125°C range. Substitution is appropriate only when application operating temperatures fall within the -40°C ~ 85°C window.

Q: What is the difference between FCE17A15SN280, FCE17A15SN2E0, FCE17A15SN480, and FCE17A15SN4D0? A: All four parts are electrically and mechanically identical. The differences are in flange feature configuration: SN280 and SN2E0 feature housing/shell unthreaded flanges, while SN480 and SN4D0 feature board side 4-40 flanges for panel mount applications.

Q: Can these parts be used interchangeably in existing assemblies? A: Interchangeability depends on mounting configuration and compliance requirements. Parts with matching flange features and mounting types are directly interchangeable. Verify RoHS compliance requirements and operating temperature specifications before substitution.