172-015-182-021 D-Sub Plug Connector Equivalent & Substitute Parts

Part Overview

The 172-015-182-021 is a 15-position D-Sub plug connector manufactured by NorComp Inc., designed for panel mount, through-hole solder termination applications. This connector features male pins in a 2-row configuration with shell size 2 (DA, A) layout. The part is actively stocked with 921 units available as new original inventory.

Equivalent and substitute parts are identified based on matching electrical and mechanical parameters: 15-position configuration, D-Sub plug style with male pins, 2-row layout, solder termination, and compatible shell size. Substitutes may vary in mounting type, flange feature design, contact finish specifications, and current rating within acceptable operational ranges.

Substiute Parts

172-015-182-021

NorComp Inc.In Stock: 962172-015-182-021 Datasheet

Current PartRFQ

172-015-183L021

NorComp Inc.In Stock: 937172-015-183L021 Datasheet

DirectRFQ

09662216702

HARTINGIn Stock: 96909662216702 Datasheet

SimilarRFQ

09662216703

HARTINGIn Stock: 119809662216703 Datasheet

SimilarRFQ

09662217703

HARTINGIn Stock: 109209662217703 Datasheet

SimilarRFQ

SDAB-15P(55)

Hirose Electric Co LtdIn Stock: 714SDAB-15P(55) Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following core parameters:

• Connector Configuration: 15-position, 2-row D-Sub plug with male pins
• Shell Size & Layout: Size 2 (DA, A) configuration
• Termination Method: Solder termination
• Contact Type: Signal contacts
• Flammability Compliance: UL94 V-0 rating
• Regulatory Compliance: RoHS3 compliance and EAR99 classification

Substitute parts may differ in the following parameters without affecting functional compatibility:

• Mounting type (panel mount vs. through-hole orientation)
• Flange feature design (board side vs. housing/shell vs. mating side)
• Shell material finish (nickel plated vs. unspecified)
• Contact finish and finish thickness
• Current rating (within signal-level applications)
• Operating temperature range (provided minimum is -50°C or lower)
• Dielectric material composition (PBT or PBT with glass fill)

Parameter Comparison

Engineering Selection Recommendations

All listed substitute parts maintain active product status and comply with RoHS3 and EAR99 classifications, matching the regulatory framework of the primary part 172-015-182-021.

172-015-183L021 (NorComp Inc.) is the closest functional equivalent, differing only in packaging format (tray vs. unspecified). Both parts share identical electrical and mechanical specifications, including 5A current rating, -50°C to 125°C operating range, and board-side flange configuration.

HARTING parts 09662216702, 09662216703, and 09662217703 provide substitution with higher current capacity (7.5A) and extended low-temperature rating (-55°C). These parts differ in flange feature design: 09662216702 features housing/shell flange, while 09662216703 and 09662217703 feature mating-side female screwlock flanges. Mounting type is through-hole only, without panel mount capability.

SDAB-15P(55) (Hirose Electric Co Ltd) maintains panel mount capability and nickel-plated steel shell finish. This part operates at 3A current rating and includes 350V voltage rating specification. Operating temperature range is not specified in available data.

Selection should prioritize parts matching the specific flange feature and mounting requirements of the application circuit board or panel design.

Frequently Asked Questions (FAQ)

Q: Can 172-015-183L021 be used as a direct replacement for 172-015-182-021?

A: Yes. Both parts are manufactured by NorComp Inc. and share identical electrical and mechanical specifications. The only difference is packaging format (tray vs. unspecified). Functional compatibility is complete.

Q: What is the primary difference between NorComp and HARTING substitute options?

A: NorComp parts (172-015-182-021 and 172-015-183L021) are rated for 5A current and operate from -50°C to 125°C. HARTING parts (09662216702, 09662216703, 09662217703) are rated for 7.5A current and operate from -55°C to 125°C. HARTING parts do not include panel mount capability; they are through-hole only. Flange feature designs also differ between manufacturers.

Q: Can HARTING parts replace NorComp parts in panel mount applications?

A: HARTING parts 09662216702, 09662216703, and 09662217703 are specified as through-hole mounting only and do not include panel mount capability. They are not suitable for applications requiring panel mount configuration.

Q: What is the significance of flange feature differences?

A: Flange features determine how the connector attaches to the circuit board or panel. Board-side flanges (172-015-182-021, 172-015-183L021) mount on the component side. Housing/shell flanges (09662216702) mount on the connector shell. Mating-side female screwlock flanges (09662216703, 09662217703) provide screw-locking capability on the mating interface. Selection depends on the specific mechanical design of the application.

Q: Is SDAB-15P(55) suitable for high-current applications?

A: No. SDAB-15P(55) is rated for 3A current, which is lower than the primary part (5A) and HARTING alternatives (7.5A). This part is suitable only for applications with current requirements at or below 3A.

Q: Do all substitute parts meet RoHS3 compliance?

A: Yes. All listed substitute parts are RoHS3 compliant. SDAB-15P(55) is specified as RoHS compliant. All parts are classified as EAR99 for export control purposes.

Q: What is the operating temperature consideration when selecting substitutes?

A: The primary part operates from -50°C to 125°C. HARTING parts extend the low-temperature range to -55°C. SDAB-15P(55) does not specify an operating temperature range. Selection should match or exceed the application's temperature requirements.

Q: Are contact finish specifications important for substitution?

A: Contact finish affects corrosion resistance and signal integrity. The primary part specifies gold contact finish with flash thickness. HARTING parts do not specify contact finish. SDAB-15P(55) specifies gold contact finish at 8.00µin (0.203µm) thickness. Applications requiring specific contact finish specifications should prioritize parts with matching finish data.