TE Connectivity AMP Connectors 171510-2 Ring Terminal Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 171510-2 is an insulated ring terminal connector designed for circular stud applications. This component features a 4 stud configuration with crimp termination suitable for 18-22 AWG wire gauges. The part is classified as obsolete, necessitating identification of functionally equivalent alternatives for ongoing procurement and system maintenance. Substitute parts must maintain identical mechanical and electrical specifications to ensure direct interchangeability in existing applications.

Substiute Parts

171510-2

TE Connectivity AMP ConnectorsIn Stock: 883171510-2 Datasheet

Current PartRFQ

171510-5

TE Connectivity AMP ConnectorsIn Stock: 700171510-5 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 171510-2 is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Terminal Type: Circular
• Stud/Tab Size: 4 Stud
• Wire Gauge Range: 18-22 AWG
• Termination Method: Crimp
• Insulation: Insulated
• Mounting Type: Free Hanging (In-Line)
• Series: Plasti-Grip
• Contact Material: Copper
• Features: Serrated Termination
• Mechanical Dimensions: Thickness 0.031" (0.79mm), Width 0.217" (5.50mm), Length 0.685" (17.40mm)

Allowable Variation Parameters:

• Insulation Diameter: Acceptable range variance within connector design specifications
• Product Status: Active status preferred for ongoing availability
• Compliance Certifications: RoHS compliance and regulatory status

The substitute part 171510-2 maintains full compatibility with the original specification across all mandatory parameters, with the exception of insulation diameter tolerance and product status classification.

Parameter Comparison

Engineering Selection Recommendations

The TE Connectivity AMP Connectors 171510-5 serves as a direct functional equivalent to the obsolete 171510-2 model. Both components share identical specifications across all critical mechanical and electrical parameters, including terminal type, stud configuration, wire gauge compatibility, crimp termination method, and dimensional characteristics.

The primary distinction between these parts is product status classification. The 171510-2 is designated as obsolete, while the 171510-5 maintains active status with current manufacturing support. The 171510-5 additionally carries RoHS compliance certification, providing enhanced regulatory alignment for applications subject to environmental standards.

The insulation diameter tolerance range differs between the two parts. The 171510-2 specifies 0.080" to 0.120" (2.03mm to 3.05mm), while the 171510-5 specifies 0.105" to 0.140" (2.67mm to 3.56mm). This variation reflects standard manufacturing tolerance practices within the Plasti-Grip series and does not affect functional interchangeability for the specified 18-22 AWG wire gauge range.

For new designs and ongoing procurement, the 171510-5 is the appropriate selection due to active product status and regulatory compliance. For legacy system maintenance requiring exact obsolete part replacement, the 171510-5 provides full functional equivalence.

Frequently Asked Questions (FAQ)

Q: Can the 171510-5 be used as a direct replacement for the 171510-2 in existing assemblies?

A: Yes. The 171510-5 maintains identical specifications across all critical parameters including terminal type, stud size, wire gauge range, termination method, and mechanical dimensions. The parts are functionally interchangeable.

Q: What is the significance of the different insulation diameter ranges between these parts?

A: The insulation diameter tolerance variation reflects standard manufacturing specifications within the Plasti-Grip series. Both ranges accommodate the specified 18-22 AWG wire gauge. The difference does not impact electrical or mechanical performance for the intended wire gauge application.

Q: Why is the 171510-2 classified as obsolete?

A: Product status classifications are determined by manufacturer production and support decisions. The 171510-5 provides equivalent functionality with active manufacturing support and is the recommended selection for ongoing applications.

Q: Does the RoHS compliance status of the 171510-5 affect compatibility with the 171510-2?

A: No. RoHS compliance is an environmental and regulatory attribute that does not affect electrical or mechanical compatibility. The 171510-5 RoHS compliance status makes it suitable for applications with environmental regulatory requirements.

Q: Are there any wire gauge limitations when substituting the 171510-5 for the 171510-2?

A: No. Both parts support identical wire gauge specifications of 18-22 AWG. No adjustment to termination or application parameters is required.

Q: What is the Moisture Sensitivity Level (MSL) for these components?

A: Both the 171510-2 and 171510-5 carry an MSL rating of 1 (Unlimited), indicating no moisture sensitivity restrictions for storage or handling.

Q: Are these parts suitable for high-reliability applications?

A: Both components feature serrated termination design and copper contact material. Suitability for specific high-reliability applications depends on system-level requirements and environmental conditions beyond component specifications.