Phoenix Contact 1714941 Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 1714941 is a rectangular connector header designed for surface mount applications with 40 positions at 1.27mm pitch. This component is classified as obsolete, making equivalent and substitute parts necessary for ongoing production and maintenance applications. The connector features shrouded 4-wall construction, push-pull fastening, and gold-plated mating contacts suitable for board-to-board or cable interconnections in industrial and commercial electronics.

Substiute Parts

1714941

Phoenix ContactIn Stock: 11621714941 Datasheet

Current PartRFQ

1373887

Phoenix ContactIn Stock: 12401373887 Datasheet

DirectRFQ

15110402601000

HARTINGIn Stock: 1288715110402601000 Datasheet

SimilarRFQ

ESMC-M-40-SGS-SMT-A-PP-T/R

Adam TechIn Stock: 1231ESMC-M-40-SGS-SMT-A-PP-T/R Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Phoenix Contact 1714941 is determined by the following critical parameters:

Primary Matching Criteria:

• Pitch - Mating: 0.050" (1.27mm)
• Number of Positions: 40
• Number of Rows: 2
• Row Spacing - Mating: 0.050" (1.27mm)
• Connector Type: Header
• Contact Type: Male Pin
• Mounting Type: Surface Mount
• Shrouding: Shrouded - 4 Wall
• Fastening Type: Push-Pull
• Operating Temperature: -55°C ~ 125°C
• Material Flammability Rating: UL94 V-0

Secondary Compatibility Factors:

• Contact Finish - Mating: Gold
• Termination: Solder
• Insulation Material: Liquid Crystal Polymer (LCP) or equivalent thermoplastic
• Moisture Sensitivity Level: 1 (Unlimited)

The following parts meet these substitution criteria and are classified as direct or similar equivalents based on electrical and mechanical compatibility.

Parameter Comparison

Engineering Selection Recommendations

Phoenix Contact 1373887 is the primary direct equivalent. This part maintains Phoenix Contact manufacturer continuity and is classified as active product status, ensuring long-term availability and supply chain stability. It meets all critical electrical and mechanical parameters with enhanced current rating of 2.2A compared to the original 1.4A specification. RoHS3 compliance provides regulatory alignment with current environmental standards.

HARTING 15110402601000 is a cross-manufacturer equivalent from the har-flex® series. This part is active and widely available with substantial inventory. It matches all critical dimensional and electrical parameters and includes pick-and-place features beneficial for automated assembly. RoHS3 compliance and REACH unaffected status support regulatory requirements.

Adam Tech ESMC-M-40-SGS-SMT-A-PP-T/R is a similar equivalent from the ESMC series. This part is active and meets all core substitution criteria. The contact material differs (Phosphor Bronze versus Copper Alloy), and insulation material is thermoplastic rather than LCP. Current rating is 1.2A, which is lower than the original specification. This part supports multiple mated stacking heights (8mm, 10.8mm, 15.4mm) and includes pick-and-place features.

Selection should prioritize Phoenix Contact 1373887 for direct manufacturer continuity, or HARTING 15110402601000 for cross-manufacturer compatibility with enhanced availability.

Frequently Asked Questions (FAQ)

Q: Can Phoenix Contact 1373887 directly replace the obsolete 1714941?

A: Yes. Both parts share identical pitch (1.27mm), position count (40), row configuration (2 rows), shrouding (4-wall), fastening type (push-pull), and operating temperature range (-55°C to 125°C). The 1373887 is active product status and meets all mechanical and electrical compatibility requirements.

Q: What is the difference in current rating between the original and substitute parts?

A: The original 1714941 is rated at 1.4A. The Phoenix Contact 1373887 substitute is rated at 2.2A, providing higher current capacity. The Adam Tech ESMC-M-40-SGS-SMT-A-PP-T/R is rated at 1.2A. Current rating selection depends on application requirements.

Q: Are all substitute parts RoHS compliant?

A: The original 1714941 is RoHS Compliant. All three substitute parts are ROHS3 Compliant, which represents current regulatory standards and ensures compatibility with modern supply chain requirements.

Q: What packaging formats are available for these substitutes?

A: The original 1714941 is supplied in Cut Tape (CT) and Digi-Reel® packaging. All three substitute parts are supplied in Tape & Reel (TR) format, which is standard for automated assembly processes.

Q: Do the substitute parts support the same mated stacking heights?

A: The original 1714941 supports 8mm and 10.8mm stacking heights. The Adam Tech ESMC-M-40-SGS-SMT-A-PP-T/R supports 8mm, 10.8mm, and 15.4mm stacking heights, providing additional flexibility. The Phoenix Contact 1373887 and HARTING 15110402601000 do not specify stacking height data.

Q: What is the contact material composition of each substitute?

A: The original 1714941 uses Copper Alloy contacts. Phoenix Contact 1373887 and HARTING 15110402601000 also use Copper Alloy. The Adam Tech ESMC-M-40-SGS-SMT-A-PP-T/R uses Phosphor Bronze, which is functionally compatible for this application class.

Q: Are there differences in insulation material between the original and substitutes?

A: The original 1714941 uses Liquid Crystal Polymer (LCP) insulation. Phoenix Contact 1373887 and HARTING 15110402601000 also use LCP. The Adam Tech ESMC-M-40-SGS-SMT-A-PP-T/R uses Thermoplastic insulation, which meets the same UL94 V-0 flammability rating.