Equivalent & Substitute Parts for Phoenix Contact 1714932

Part Overview

The Phoenix Contact 1714932 is a rectangular connector header designed for surface mount applications with 68 positions at 1.27mm pitch. This component is classified as obsolete, necessitating identification of active equivalent parts to maintain design continuity and ensure supply chain availability. The connector features shrouded 4-wall construction, push-pull fastening, and gold-plated mating contacts suitable for board-to-board or cable interconnection in industrial and commercial applications.

Substiute Parts

1714932

Phoenix ContactIn Stock: 9071714932 Datasheet

Current PartRFQ

1337144

Phoenix ContactIn Stock: 13671337144 Datasheet

DirectRFQ

15120682601000

HARTINGIn Stock: 120915120682601000 Datasheet

SimilarRFQ

ESMC-M-68-SGS-SMT-B-PP-T/R

Adam TechIn Stock: 1293ESMC-M-68-SGS-SMT-B-PP-T/R Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Phoenix Contact 1714932 is determined by strict alignment with the following critical parameters:

• Pitch - Mating: 0.050" (1.27mm) — exact match required
• Number of Positions: 68 — exact match required
• Number of Rows: 2 — exact match required
• Connector Type: Header — exact match required
• Contact Type: Male Pin — exact match required
• Mounting Type: Surface Mount — exact match required
• Shrouding: Shrouded - 4 Wall — exact match required
• Termination: Solder — exact match required
• Fastening Type: Push-Pull — exact match required
• Operating Temperature Range: -55°C ~ 125°C — exact match required
• Material Flammability Rating: UL94 V-0 — exact match required
• RoHS Compliance: Required for modern supply chains

All identified substitute parts meet these core electrical and mechanical criteria. Variations in contact shape, insulation height, contact material composition, and packaging format are permissible within the scope of functional equivalence.

Parameter Comparison

Engineering Selection Recommendations

Phoenix Contact 1337144 is the primary direct substitute. This part maintains Phoenix Contact manufacturer continuity, carries active product status, and achieves ROHS3 compliance. The transition from Cut Tape to Tape & Reel packaging accommodates automated assembly processes. The higher current rating of 2.2A provides enhanced electrical capacity compared to the original 1.4A specification.

HARTING 15120682601000 serves as a cross-manufacturer equivalent within the har-flex® series. This part retains Cut Tape packaging matching the original format and includes board guide and pick-and-place features. ROHS3 compliance and REACH unaffected status support regulatory requirements. Insulation height variation of 0.319" (8.10mm) versus the original 0.323" (8.20mm) remains within acceptable mechanical tolerance.

Adam Tech ESMC-M-68-SGS-SMT-B-PP-T/R provides an alternative from the ESMC series with Tape & Reel packaging. This part includes board guide, pick-and-place, and solder retention features. The current rating of 1.2A is lower than the original specification and should be evaluated against application requirements. Thermoplastic insulation material differs from the LCP specification of the original part.

All three substitute parts satisfy the mandatory electrical and mechanical criteria. Selection should prioritize supply chain availability, packaging requirements for manufacturing processes, and current rating adequacy for the target application.

Frequently Asked Questions (FAQ)

Q: Can Phoenix Contact 1337144 directly replace the 1714932 in existing designs?

A: Yes. Both parts share identical pitch (1.27mm), position count (68), row configuration (2), connector type (Header), contact type (Male Pin), mounting method (Surface Mount), shrouding (Shrouded - 4 Wall), termination (Solder), and fastening mechanism (Push-Pull). The primary difference is packaging format (Tape & Reel versus Cut Tape) and higher current rating (2.2A versus 1.4A).

Q: What are the mechanical compatibility considerations for the HARTING 15120682601000?

A: The HARTING part maintains all critical electrical and mechanical parameters. Insulation height measures 0.319" (8.10mm) compared to the original 0.323" (8.20mm), a variation of 0.004" (0.10mm) that falls within standard PCB assembly tolerances. Contact shape differs (Square versus Rectangular) but does not affect mating interface compatibility.

Q: Does the Adam Tech ESMC-M-68-SGS-SMT-B-PP-T/R meet the original current rating requirement?

A: The Adam Tech part specifies 1.2A current rating, which is lower than the original 1.4A specification. Applications requiring the full 1.4A capacity should be evaluated against this reduced rating. The part remains suitable for applications within the 1.2A threshold.

Q: Are all substitute parts RoHS compliant?

A: Yes. All three substitute parts achieve ROHS3 compliance, exceeding the original RoHS Compliant status. This ensures regulatory alignment with current environmental standards.

Q: What packaging considerations apply to automated assembly?

A: Phoenix Contact 1337144 and Adam Tech ESMC-M-68-SGS-SMT-B-PP-T/R are supplied in Tape & Reel format, optimized for automated pick-and-place equipment. HARTING 15120682601000 is supplied in Cut Tape format, suitable for manual or semi-automated assembly processes. Packaging selection should align with manufacturing capability.

Q: Do all substitute parts support the full operating temperature range?

A: Yes. All substitute parts maintain the -55°C to 125°C operating temperature range specified for the original part, ensuring thermal performance equivalence across industrial and commercial applications.