Phoenix Contact 1714916 Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 1714916 is a surface mount rectangular connector header with 26 positions at 1.27mm pitch, configured in a right-angle orientation for board-to-board or cable connections. This component features shrouded 4-wall design with push-pull fastening and solder termination. The part is classified as obsolete, making identification of functionally equivalent alternatives essential for ongoing design support and procurement continuity.

Key Parameters

Parameter	Value
Connector Type	Header
Contact Type	Male Pin
Pitch - Mating	0.050" (1.27mm)
Number of Positions	26
Number of Rows	2
Row Spacing - Mating	0.050" (1.27mm)
Mounting Type	Surface Mount, Right Angle
Shrouding	Shrouded - 4 Wall
Termination	Solder
Fastening Type	Push-Pull
Operating Temperature	-55°C ~ 125°C
Material Flammability Rating	UL94 V-0
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the Phoenix Contact 1714916 is determined by strict alignment with the following critical parameters:

Connector type: Header
Contact type: Male pin
Pitch specification: 0.050" (1.27mm) mating pitch with 0.050" (1.27mm) row spacing
Position count: 26 positions in 2-row configuration
Mounting: Surface mount, right-angle orientation
Shrouding: 4-wall shrouded design
Termination: Solder
Fastening: Push-pull mechanism
Operating temperature range: -55°C ~ 125°C
Flammability: UL94 V-0
Compliance: ROHS3 compliant

All identified substitute parts meet these core electrical and mechanical requirements. Variations in contact finish, insulation material, or contact shape do not preclude functional equivalence when all primary parameters align.

Parameter Comparison

Parameter	1714916 (Phoenix Contact)	1377300 (Phoenix Contact)	15150262601000 (HARTING)	ESMC-M-26-SGR-SMT-T/R (Adam Tech)
Connector Type	Header	Header	Header	Header
Contact Type	Male Pin	Male Pin	Male Pin	Male Pin
Pitch - Mating	0.050" (1.27mm)	0.050" (1.27mm)	0.050" (1.27mm)	0.050" (1.27mm)
Number of Positions	26	26	26	26
Number of Rows	2	2	2	2
Row Spacing - Mating	0.050" (1.27mm)	0.050" (1.27mm)	0.050" (1.27mm)	0.050" (1.27mm)
Mounting Type	Surface Mount, Right Angle	Surface Mount, Right Angle	Surface Mount, Right Angle	Surface Mount, Right Angle
Shrouding	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall
Termination	Solder	Solder	Solder	Solder
Fastening Type	Push-Pull	Push-Pull	Push-Pull	Push-Pull
Operating Temperature	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)

Engineering Selection Recommendations

Phoenix Contact 1377300 is the primary direct substitute. This part maintains Phoenix Contact series continuity with active product status, ensuring long-term availability and manufacturer support. It is ROHS3 compliant and carries MSL 1 rating identical to the original component.

HARTING 15150262601000 provides an alternative from an established connector manufacturer. The har-flex® series part is active and fully compliant with ROHS3 and MSL 1 specifications. This option is suitable for applications requiring multi-source qualification.

Adam Tech ESMC-M-26-SGR-SMT-T/R represents a third-party equivalent with active status and full ROHS3 compliance. The ESMC series offers equivalent electrical and mechanical performance within the specified operating parameters.

All three substitute parts satisfy the core functional requirements of the obsolete 1714916. Selection should be based on procurement availability, cost considerations, and existing supplier relationships. No additional design modifications are required for direct substitution.

Frequently Asked Questions (FAQ)

Q: Can Phoenix Contact 1377300 be used as a direct replacement for 1714916?

A: Yes. Both parts share identical connector type, contact configuration, pitch, position count, row spacing, mounting orientation, shrouding, termination method, and fastening mechanism. The 1377300 is active status, making it the preferred substitute for the obsolete 1714916.

Q: What are the key differences between the substitute parts?

A: All substitutes meet the core electrical and mechanical parameters. Variations exist in contact shape (rectangular vs. square), contact finish specifications, and insulation material composition. These differences do not affect functional compatibility within the specified operating parameters.

Q: Are there packaging differences between the main part and substitutes?

A: The original 1714916 is supplied in Cut Tape (CT) and Digi-Reel® packaging. Substitute parts 1377300, 15150262601000, and ESMC-M-26-SGR-SMT-T/R are supplied in Tape & Reel (TR) format. Both packaging types are suitable for automated assembly processes.

Q: Do all substitute parts meet the same compliance requirements?

A: Yes. All parts are ROHS3 compliant, carry UL94 V-0 flammability rating, and have MSL 1 moisture sensitivity level. All operate within the -55°C ~ 125°C temperature range.

Q: Can these parts be used interchangeably in existing PCB designs?

A: Yes, provided the PCB footprint accommodates the specific contact shape and insulation height of the selected substitute. Verify mechanical dimensions with the manufacturer datasheet before final design release.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message